@@ -84,8 +84,16 @@ config KEYSTONE_REMOTEPROC
It's safe to say N here if you're not interested in the Keystone
DSPs or just want to use a bare minimum kernel.
-config QCOM_ADSP_PIL
- tristate "Qualcomm ADSP Peripheral Image Loader"
+config QCOM_RPROC_COMMON
+ tristate
+
+config QCOM_Q6V5_COMMON
+ tristate
+ depends on ARCH_QCOM
+ depends on QCOM_SMEM
+
+config QCOM_Q6V5_PAS
+ tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
@@ -98,15 +106,7 @@ config QCOM_ADSP_PIL
select QCOM_SCM
help
Say y here to support the TrustZone based Peripherial Image Loader
- for the Qualcomm ADSP remote processors.
-
-config QCOM_RPROC_COMMON
- tristate
-
-config QCOM_Q6V5_COMMON
- tristate
- depends on ARCH_QCOM
- depends on QCOM_SMEM
+ for the Qualcomm Hexagon v5 based remote processors.
config QCOM_Q6V5_PIL
tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
@@ -120,8 +120,9 @@ config QCOM_Q6V5_PIL
select QCOM_RPROC_COMMON
select QCOM_SCM
help
- Say y here to support the Qualcomm Peripherial Image Loader for the
- Hexagon V5 based remote processors.
+ Say y here to support the TrustZone based Peripherial Image Loader
+ for the Qualcomm Hexagon v5 based remote processors. This is commonly
+ used to control subsystems such as ADSP, Compute and Sensor.
config QCOM_Q6V5_WCSS
tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
@@ -14,9 +14,9 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o
obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o
obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o
-obj-$(CONFIG_QCOM_ADSP_PIL) += qcom_adsp_pil.o
obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o
obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o
+obj-$(CONFIG_QCOM_Q6V5_PAS) += qcom_q6v5_pas.o
obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o
obj-$(CONFIG_QCOM_Q6V5_WCSS) += qcom_q6v5_wcss.o
obj-$(CONFIG_QCOM_SYSMON) += qcom_sysmon.o
similarity index 98%
rename from drivers/remoteproc/qcom_adsp_pil.c
rename to drivers/remoteproc/qcom_q6v5_pas.c
@@ -364,11 +364,11 @@ static struct platform_driver adsp_driver = {
.probe = adsp_probe,
.remove = adsp_remove,
.driver = {
- .name = "qcom_adsp_pil",
+ .name = "qcom_q6v5_pas",
.of_match_table = adsp_of_match,
},
};
module_platform_driver(adsp_driver);
-MODULE_DESCRIPTION("Qualcomm MSM8974/MSM8996 ADSP Peripherial Image Loader");
+MODULE_DESCRIPTION("Qualcomm Hexagon v5 Peripheral Authentication Service driver");
MODULE_LICENSE("GPL v2");
The Hexagon v5 ADSP driver is used for more than only the ADSP and there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to qcom_q6v5_pas in order to better suite this. Cc: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v2: - Move the rename of qcom_q6v5_pil to the 2nd patch, where it belongs. drivers/remoteproc/Kconfig | 27 ++++++++++--------- drivers/remoteproc/Makefile | 2 +- .../{qcom_adsp_pil.c => qcom_q6v5_pas.c} | 4 +-- 3 files changed, 17 insertions(+), 16 deletions(-) rename drivers/remoteproc/{qcom_adsp_pil.c => qcom_q6v5_pas.c} (98%)