Message ID | 20190131003933.11436-9-bjorn.andersson@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Qualcomm AOSS QMP driver and modem dts | expand |
On Wed 30 Jan 16:39 PST 2019, Bjorn Andersson wrote: > The SDM845 MSS needs the load_state powerdomain voted for during the > duration of the MSS being powered on, to let the AOSS know that it may > not perform certain power save measures. So vote for this. > > Tested-by: Sibi Sankar <sibis@codeaurora.org> > Reviewed-by: Sibi Sankar <sibis@codeaurora.org> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > Applied > Changes since v4: > - None > > Changes since v3: > - None > > drivers/remoteproc/qcom_q6v5_mss.c | 31 ++++++++++++++++++++++++++++-- > 1 file changed, 29 insertions(+), 2 deletions(-) > > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c > index c32c63e351a0..e30f5486fd20 100644 > --- a/drivers/remoteproc/qcom_q6v5_mss.c > +++ b/drivers/remoteproc/qcom_q6v5_mss.c > @@ -133,6 +133,7 @@ struct rproc_hexagon_res { > char **proxy_clk_names; > char **reset_clk_names; > char **active_clk_names; > + char **active_pd_names; > char **proxy_pd_names; > int version; > bool need_mem_protection; > @@ -159,10 +160,12 @@ struct q6v5 { > struct clk *active_clks[8]; > struct clk *reset_clks[4]; > struct clk *proxy_clks[4]; > + struct device *active_pds[1]; > struct device *proxy_pds[3]; > int active_clk_count; > int reset_clk_count; > int proxy_clk_count; > + int active_pd_count; > int proxy_pd_count; > > struct reg_info active_regs[1]; > @@ -730,10 +733,16 @@ static int q6v5_mba_load(struct q6v5 *qproc) > > qcom_q6v5_prepare(&qproc->q6v5); > > + ret = q6v5_pds_enable(qproc, qproc->active_pds, qproc->active_pd_count); > + if (ret < 0) { > + dev_err(qproc->dev, "failed to enable active power domains\n"); > + goto disable_irqs; > + } > + > ret = q6v5_pds_enable(qproc, qproc->proxy_pds, qproc->proxy_pd_count); > if (ret < 0) { > dev_err(qproc->dev, "failed to enable proxy power domains\n"); > - goto disable_irqs; > + goto disable_active_pds; > } > > ret = q6v5_regulator_enable(qproc, qproc->proxy_regs, > @@ -839,6 +848,8 @@ static int q6v5_mba_load(struct q6v5 *qproc) > qproc->proxy_reg_count); > disable_proxy_pds: > q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count); > +disable_active_pds: > + q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count); > disable_irqs: > qcom_q6v5_unprepare(&qproc->q6v5); > > @@ -878,6 +889,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc) > qproc->active_clk_count); > q6v5_regulator_disable(qproc, qproc->active_regs, > qproc->active_reg_count); > + q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count); > > /* In case of failure or coredump scenario where reclaiming MBA memory > * could not happen reclaim it here. > @@ -1412,11 +1424,19 @@ static int q6v5_probe(struct platform_device *pdev) > } > qproc->active_reg_count = ret; > > + ret = q6v5_pds_attach(&pdev->dev, qproc->active_pds, > + desc->active_pd_names); > + if (ret < 0) { > + dev_err(&pdev->dev, "Failed to attach active power domains\n"); > + goto free_rproc; > + } > + qproc->active_pd_count = ret; > + > ret = q6v5_pds_attach(&pdev->dev, qproc->proxy_pds, > desc->proxy_pd_names); > if (ret < 0) { > dev_err(&pdev->dev, "Failed to init power domains\n"); > - goto free_rproc; > + goto detach_active_pds; > } > qproc->proxy_pd_count = ret; > > @@ -1452,6 +1472,8 @@ static int q6v5_probe(struct platform_device *pdev) > > detach_proxy_pds: > q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count); > +detach_active_pds: > + q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count); > free_rproc: > rproc_free(rproc); > > @@ -1469,6 +1491,7 @@ static int q6v5_remove(struct platform_device *pdev) > qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev); > qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev); > > + q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count); > q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count); > > rproc_free(qproc->rproc); > @@ -1495,6 +1518,10 @@ static const struct rproc_hexagon_res sdm845_mss = { > "mnoc_axi", > NULL > }, > + .active_pd_names = (char*[]){ > + "load_state", > + NULL > + }, > .proxy_pd_names = (char*[]){ > "cx", > "mx", > -- > 2.18.0 >
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c index c32c63e351a0..e30f5486fd20 100644 --- a/drivers/remoteproc/qcom_q6v5_mss.c +++ b/drivers/remoteproc/qcom_q6v5_mss.c @@ -133,6 +133,7 @@ struct rproc_hexagon_res { char **proxy_clk_names; char **reset_clk_names; char **active_clk_names; + char **active_pd_names; char **proxy_pd_names; int version; bool need_mem_protection; @@ -159,10 +160,12 @@ struct q6v5 { struct clk *active_clks[8]; struct clk *reset_clks[4]; struct clk *proxy_clks[4]; + struct device *active_pds[1]; struct device *proxy_pds[3]; int active_clk_count; int reset_clk_count; int proxy_clk_count; + int active_pd_count; int proxy_pd_count; struct reg_info active_regs[1]; @@ -730,10 +733,16 @@ static int q6v5_mba_load(struct q6v5 *qproc) qcom_q6v5_prepare(&qproc->q6v5); + ret = q6v5_pds_enable(qproc, qproc->active_pds, qproc->active_pd_count); + if (ret < 0) { + dev_err(qproc->dev, "failed to enable active power domains\n"); + goto disable_irqs; + } + ret = q6v5_pds_enable(qproc, qproc->proxy_pds, qproc->proxy_pd_count); if (ret < 0) { dev_err(qproc->dev, "failed to enable proxy power domains\n"); - goto disable_irqs; + goto disable_active_pds; } ret = q6v5_regulator_enable(qproc, qproc->proxy_regs, @@ -839,6 +848,8 @@ static int q6v5_mba_load(struct q6v5 *qproc) qproc->proxy_reg_count); disable_proxy_pds: q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count); +disable_active_pds: + q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count); disable_irqs: qcom_q6v5_unprepare(&qproc->q6v5); @@ -878,6 +889,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc) qproc->active_clk_count); q6v5_regulator_disable(qproc, qproc->active_regs, qproc->active_reg_count); + q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count); /* In case of failure or coredump scenario where reclaiming MBA memory * could not happen reclaim it here. @@ -1412,11 +1424,19 @@ static int q6v5_probe(struct platform_device *pdev) } qproc->active_reg_count = ret; + ret = q6v5_pds_attach(&pdev->dev, qproc->active_pds, + desc->active_pd_names); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to attach active power domains\n"); + goto free_rproc; + } + qproc->active_pd_count = ret; + ret = q6v5_pds_attach(&pdev->dev, qproc->proxy_pds, desc->proxy_pd_names); if (ret < 0) { dev_err(&pdev->dev, "Failed to init power domains\n"); - goto free_rproc; + goto detach_active_pds; } qproc->proxy_pd_count = ret; @@ -1452,6 +1472,8 @@ static int q6v5_probe(struct platform_device *pdev) detach_proxy_pds: q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count); +detach_active_pds: + q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count); free_rproc: rproc_free(rproc); @@ -1469,6 +1491,7 @@ static int q6v5_remove(struct platform_device *pdev) qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev); qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev); + q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count); q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count); rproc_free(qproc->rproc); @@ -1495,6 +1518,10 @@ static const struct rproc_hexagon_res sdm845_mss = { "mnoc_axi", NULL }, + .active_pd_names = (char*[]){ + "load_state", + NULL + }, .proxy_pd_names = (char*[]){ "cx", "mx",