| Message ID | 20200313081718.30612-13-t-kristo@ti.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | remoteproc: updates for omap remoteproc support | expand |
On Fri, Mar 13, 2020 at 10:17:15AM +0200, Tero Kristo wrote: > From: Suman Anna <s-anna@ti.com> > > This patch enhances the PM support in the OMAP remoteproc driver to > support the runtime auto-suspend. A remoteproc may not be required to > be running all the time, and typically will need to be active only > during certain usecases. As such, to save power, it should be turned > off during potential long periods of inactivity between usecases. > This suspend and resume of the device is a relatively heavy process > in terms of latencies, so a remoteproc should be suspended only after > a certain period of prolonged inactivity. The OMAP remoteproc driver > leverages the runtime pm framework's auto_suspend feature to accomplish > this functionality. This feature is automatically enabled when a remote > processor has successfully booted. The 'autosuspend_delay_ms' for each > device dictates the inactivity period/time to wait for before > suspending the device. > > The runtime auto-suspend design relies on marking the last busy time > on every communication (virtqueue kick) to and from the remote processor. > When there has been no activity for 'autosuspend_delay_ms' time, the > runtime PM framework invokes the driver's runtime pm suspend callback > to suspend the device. The remote processor will be woken up on the > initiation of the next communication message through the runtime pm > resume callback. The current auto-suspend design also allows a remote > processor to deny a auto-suspend attempt, if it wishes to, by sending a > NACK response to the initial suspend request message sent to the remote > processor as part of the suspend process. The auto-suspend request is > also only attempted if the remote processor is idled and in standby at > the time of inactivity timer expiry. This choice is made to avoid > unnecessary messaging, and the auto-suspend is simply rescheduled to > be attempted again after a further lapse of autosuspend_delay_ms. > > The runtime pm callbacks functionality in this patch reuses most of the > core logic from the suspend/resume support code, and make use of an > additional auto_suspend flag to differentiate the logic in common code > from system suspend. The system suspend/resume sequences are also updated > to reflect the proper pm_runtime statuses, and also to really perform a > suspend/resume only if the remoteproc has not been auto-suspended at the > time of request. The remote processor is left in suspended state on a > system resume if it has been auto-suspended before, and will be woken up > only when a usecase needs to run. > > The OMAP remoteproc driver currently uses a default value of 10 seconds > for all OMAP remoteprocs, and a different value can be chosen either by > choosing a positive value for the 'ti,autosuspend-delay-ms' under DT or > by updating the 'autosuspend_delay_ms' field at runtime through the > sysfs interface. A negative value is equivalent to disabling the runtime > suspend. > Eg: To use 25 seconds for IPU2 on DRA7xx, > echo 25000 > /sys/bus/platform/devices/55020000.ipu/power/autosuspend_delay_ms > > The runtime suspend feature can also be similarly enabled or disabled by > writing 'auto' or 'on' to the device's 'control' power field. The default > is enabled. > Eg: To disable auto-suspend for IPU2 on DRA7xx SoC, > echo on > /sys/bus/platform/devices/55020000.ipu/power/control > > Signed-off-by: Suman Anna <s-anna@ti.com> > [t-kristo@ti.com: converted to use ti-sysc instead of hwmod] > Signed-off-by: Tero Kristo <t-kristo@ti.com> > Reviewed-by: Andrew F. Davis <afd@ti.com> > --- > v8: > - added mutex handling under the runtime PM calls Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> > > drivers/remoteproc/omap_remoteproc.c | 212 +++++++++++++++++++++++++-- > 1 file changed, 203 insertions(+), 9 deletions(-) > > diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c > index e90cbeb66d6f..ba7c1a1c17d6 100644 > --- a/drivers/remoteproc/omap_remoteproc.c > +++ b/drivers/remoteproc/omap_remoteproc.c > @@ -22,6 +22,7 @@ > #include <linux/of_device.h> > #include <linux/of_reserved_mem.h> > #include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > #include <linux/dma-mapping.h> > #include <linux/remoteproc.h> > #include <linux/mailbox_client.h> > @@ -37,6 +38,9 @@ > #include "omap_remoteproc.h" > #include "remoteproc_internal.h" > > +/* default auto-suspend delay (ms) */ > +#define DEFAULT_AUTOSUSPEND_DELAY 10000 > + > /** > * struct omap_rproc_boot_data - boot data structure for the DSP omap rprocs > * @syscon: regmap handle for the system control configuration module > @@ -83,6 +87,8 @@ struct omap_rproc_timer { > * @num_mems: number of internal memory regions > * @num_timers: number of rproc timer(s) > * @timers: timer(s) info used by rproc > + * @autosuspend_delay: auto-suspend delay value to be used for runtime pm > + * @need_resume: if true a resume is needed in the system resume callback > * @rproc: rproc handle > * @reset: reset handle > * @pm_comp: completion primitive to sync for suspend response > @@ -97,6 +103,8 @@ struct omap_rproc { > int num_mems; > int num_timers; > struct omap_rproc_timer *timers; > + int autosuspend_delay; > + bool need_resume; > struct rproc *rproc; > struct reset_control *reset; > struct completion pm_comp; > @@ -407,11 +415,23 @@ static void omap_rproc_kick(struct rproc *rproc, int vqid) > struct device *dev = rproc->dev.parent; > int ret; > > + /* wake up the rproc before kicking it */ > + ret = pm_runtime_get_sync(dev); > + if (WARN_ON(ret < 0)) { > + dev_err(dev, "pm_runtime_get_sync() failed during kick, ret = %d\n", > + ret); > + pm_runtime_put_noidle(dev); > + return; > + } > + > /* send the index of the triggered virtqueue in the mailbox payload */ > ret = mbox_send_message(oproc->mbox, (void *)vqid); > if (ret < 0) > dev_err(dev, "failed to send mailbox message, status = %d\n", > ret); > + > + pm_runtime_mark_last_busy(dev); > + pm_runtime_put_autosuspend(dev); > } > > /** > @@ -502,6 +522,18 @@ static int omap_rproc_start(struct rproc *rproc) > goto disable_timers; > } > > + /* > + * remote processor is up, so update the runtime pm status and > + * enable the auto-suspend. The device usage count is incremented > + * manually for balancing it for auto-suspend > + */ > + pm_runtime_set_active(dev); > + pm_runtime_use_autosuspend(dev); > + pm_runtime_get_noresume(dev); > + pm_runtime_enable(dev); > + pm_runtime_mark_last_busy(dev); > + pm_runtime_put_autosuspend(dev); > + > return 0; > > disable_timers: > @@ -514,20 +546,52 @@ static int omap_rproc_start(struct rproc *rproc) > /* power off the remote processor */ > static int omap_rproc_stop(struct rproc *rproc) > { > + struct device *dev = rproc->dev.parent; > struct omap_rproc *oproc = rproc->priv; > int ret; > > + /* > + * cancel any possible scheduled runtime suspend by incrementing > + * the device usage count, and resuming the device. The remoteproc > + * also needs to be woken up if suspended, to avoid the remoteproc > + * OS to continue to remember any context that it has saved, and > + * avoid potential issues in misindentifying a subsequent device > + * reboot as a power restore boot > + */ > + ret = pm_runtime_get_sync(dev); > + if (ret < 0) { > + pm_runtime_put_noidle(dev); > + return ret; > + } > + > ret = reset_control_assert(oproc->reset); > if (ret) > - return ret; > + goto out; > > ret = omap_rproc_disable_timers(rproc, true); > if (ret) > - return ret; > + goto enable_device; > > mbox_free_channel(oproc->mbox); > > + /* > + * update the runtime pm states and status now that the remoteproc > + * has stopped > + */ > + pm_runtime_disable(dev); > + pm_runtime_dont_use_autosuspend(dev); > + pm_runtime_put_noidle(dev); > + pm_runtime_set_suspended(dev); > + > return 0; > + > +enable_device: > + reset_control_deassert(oproc->reset); > +out: > + /* schedule the next auto-suspend */ > + pm_runtime_mark_last_busy(dev); > + pm_runtime_put_autosuspend(dev); > + return ret; > } > > /** > @@ -584,17 +648,19 @@ static bool _is_rproc_in_standby(struct omap_rproc *oproc) > > /* 1 sec is long enough time to let the remoteproc side suspend the device */ > #define DEF_SUSPEND_TIMEOUT 1000 > -static int _omap_rproc_suspend(struct rproc *rproc) > +static int _omap_rproc_suspend(struct rproc *rproc, bool auto_suspend) > { > struct device *dev = rproc->dev.parent; > struct omap_rproc *oproc = rproc->priv; > unsigned long to = msecs_to_jiffies(DEF_SUSPEND_TIMEOUT); > unsigned long ta = jiffies + to; > + u32 suspend_msg = auto_suspend ? > + RP_MBOX_SUSPEND_AUTO : RP_MBOX_SUSPEND_SYSTEM; > int ret; > > reinit_completion(&oproc->pm_comp); > oproc->suspend_acked = false; > - ret = mbox_send_message(oproc->mbox, (void *)RP_MBOX_SUSPEND_SYSTEM); > + ret = mbox_send_message(oproc->mbox, (void *)suspend_msg); > if (ret < 0) { > dev_err(dev, "PM mbox_send_message failed: %d\n", ret); > return ret; > @@ -638,32 +704,62 @@ static int _omap_rproc_suspend(struct rproc *rproc) > goto enable_device; > } > > + /* > + * IOMMUs would have to be disabled specifically for runtime suspend. > + * They are handled automatically through System PM callbacks for > + * regular system suspend > + */ > + if (auto_suspend) { > + ret = omap_iommu_domain_deactivate(rproc->domain); > + if (ret) { > + dev_err(dev, "iommu domain deactivate failed %d\n", > + ret); > + goto enable_timers; > + } > + } > + > return 0; > > +enable_timers: > + /* ignore errors on re-enabling code */ > + omap_rproc_enable_timers(rproc, false); > enable_device: > reset_control_deassert(oproc->reset); > return ret; > } > > -static int _omap_rproc_resume(struct rproc *rproc) > +static int _omap_rproc_resume(struct rproc *rproc, bool auto_suspend) > { > struct device *dev = rproc->dev.parent; > struct omap_rproc *oproc = rproc->priv; > int ret; > > + /* > + * IOMMUs would have to be enabled specifically for runtime resume. > + * They would have been already enabled automatically through System > + * PM callbacks for regular system resume > + */ > + if (auto_suspend) { > + ret = omap_iommu_domain_activate(rproc->domain); > + if (ret) { > + dev_err(dev, "omap_iommu activate failed %d\n", ret); > + goto out; > + } > + } > + > /* boot address could be lost after suspend, so restore it */ > if (oproc->boot_data) { > ret = omap_rproc_write_dsp_boot_addr(rproc); > if (ret) { > dev_err(dev, "boot address restore failed %d\n", ret); > - goto out; > + goto suspend_iommu; > } > } > > ret = omap_rproc_enable_timers(rproc, false); > if (ret) { > dev_err(dev, "enabling timers during resume failed %d\n", ret); > - goto out; > + goto suspend_iommu; > } > > ret = reset_control_deassert(oproc->reset); > @@ -676,6 +772,9 @@ static int _omap_rproc_resume(struct rproc *rproc) > > disable_timers: > omap_rproc_disable_timers(rproc, false); > +suspend_iommu: > + if (auto_suspend) > + omap_iommu_domain_deactivate(rproc->domain); > out: > return ret; > } > @@ -684,6 +783,7 @@ static int __maybe_unused omap_rproc_suspend(struct device *dev) > { > struct platform_device *pdev = to_platform_device(dev); > struct rproc *rproc = platform_get_drvdata(pdev); > + struct omap_rproc *oproc = rproc->priv; > int ret = 0; > > mutex_lock(&rproc->lock); > @@ -698,13 +798,19 @@ static int __maybe_unused omap_rproc_suspend(struct device *dev) > goto out; > } > > - ret = _omap_rproc_suspend(rproc); > + ret = _omap_rproc_suspend(rproc, false); > if (ret) { > dev_err(dev, "suspend failed %d\n", ret); > goto out; > } > > + /* > + * remoteproc is running at the time of system suspend, so remember > + * it so as to wake it up during system resume > + */ > + oproc->need_resume = true; > rproc->state = RPROC_SUSPENDED; > + > out: > mutex_unlock(&rproc->lock); > return ret; > @@ -714,6 +820,7 @@ static int __maybe_unused omap_rproc_resume(struct device *dev) > { > struct platform_device *pdev = to_platform_device(dev); > struct rproc *rproc = platform_get_drvdata(pdev); > + struct omap_rproc *oproc = rproc->priv; > int ret = 0; > > mutex_lock(&rproc->lock); > @@ -725,12 +832,91 @@ static int __maybe_unused omap_rproc_resume(struct device *dev) > goto out; > } > > - ret = _omap_rproc_resume(rproc); > + /* > + * remoteproc was auto-suspended at the time of system suspend, > + * so no need to wake-up the processor (leave it in suspended > + * state, will be woken up during a subsequent runtime_resume) > + */ > + if (!oproc->need_resume) > + goto out; > + > + ret = _omap_rproc_resume(rproc, false); > if (ret) { > dev_err(dev, "resume failed %d\n", ret); > goto out; > } > > + oproc->need_resume = false; > + rproc->state = RPROC_RUNNING; > + > + pm_runtime_mark_last_busy(dev); > +out: > + mutex_unlock(&rproc->lock); > + return ret; > +} > + > +static int omap_rproc_runtime_suspend(struct device *dev) > +{ > + struct rproc *rproc = dev_get_drvdata(dev); > + struct omap_rproc *oproc = rproc->priv; > + int ret; > + > + mutex_lock(&rproc->lock); > + if (rproc->state == RPROC_CRASHED) { > + dev_dbg(dev, "rproc cannot be runtime suspended when crashed!\n"); > + ret = -EBUSY; > + goto out; > + } > + > + if (WARN_ON(rproc->state != RPROC_RUNNING)) { > + dev_err(dev, "rproc cannot be runtime suspended when not running!\n"); > + ret = -EBUSY; > + goto out; > + } > + > + /* > + * do not even attempt suspend if the remote processor is not > + * idled for runtime auto-suspend > + */ > + if (!_is_rproc_in_standby(oproc)) { > + ret = -EBUSY; > + goto abort; > + } > + > + ret = _omap_rproc_suspend(rproc, true); > + if (ret) > + goto abort; > + > + rproc->state = RPROC_SUSPENDED; > + mutex_unlock(&rproc->lock); > + return 0; > + > +abort: > + pm_runtime_mark_last_busy(dev); > +out: > + mutex_unlock(&rproc->lock); > + return ret; > +} > + > +static int omap_rproc_runtime_resume(struct device *dev) > +{ > + struct rproc *rproc = dev_get_drvdata(dev); > + int ret; > + > + mutex_lock(&rproc->lock); > + if (WARN_ON(rproc->state != RPROC_SUSPENDED)) { > + dev_err(dev, "rproc cannot be runtime resumed if not suspended! state=%d\n", > + rproc->state); > + ret = -EBUSY; > + goto out; > + } > + > + ret = _omap_rproc_resume(rproc, true); > + if (ret) { > + dev_err(dev, "runtime resume failed %d\n", ret); > + goto out; > + } > + > rproc->state = RPROC_RUNNING; > out: > mutex_unlock(&rproc->lock); > @@ -997,6 +1183,12 @@ static int omap_rproc_probe(struct platform_device *pdev) > goto free_rproc; > > init_completion(&oproc->pm_comp); > + oproc->autosuspend_delay = DEFAULT_AUTOSUSPEND_DELAY; > + > + of_property_read_u32(pdev->dev.of_node, "ti,autosuspend-delay-ms", > + &oproc->autosuspend_delay); > + > + pm_runtime_set_autosuspend_delay(&pdev->dev, oproc->autosuspend_delay); > > oproc->fck = devm_clk_get(&pdev->dev, 0); > if (IS_ERR(oproc->fck)) { > @@ -1039,6 +1231,8 @@ static int omap_rproc_remove(struct platform_device *pdev) > > static const struct dev_pm_ops omap_rproc_pm_ops = { > SET_SYSTEM_SLEEP_PM_OPS(omap_rproc_suspend, omap_rproc_resume) > + SET_RUNTIME_PM_OPS(omap_rproc_runtime_suspend, > + omap_rproc_runtime_resume, NULL) > }; > > static struct platform_driver omap_rproc_driver = { > -- > 2.17.1 > > -- > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c index e90cbeb66d6f..ba7c1a1c17d6 100644 --- a/drivers/remoteproc/omap_remoteproc.c +++ b/drivers/remoteproc/omap_remoteproc.c @@ -22,6 +22,7 @@ #include <linux/of_device.h> #include <linux/of_reserved_mem.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/dma-mapping.h> #include <linux/remoteproc.h> #include <linux/mailbox_client.h> @@ -37,6 +38,9 @@ #include "omap_remoteproc.h" #include "remoteproc_internal.h" +/* default auto-suspend delay (ms) */ +#define DEFAULT_AUTOSUSPEND_DELAY 10000 + /** * struct omap_rproc_boot_data - boot data structure for the DSP omap rprocs * @syscon: regmap handle for the system control configuration module @@ -83,6 +87,8 @@ struct omap_rproc_timer { * @num_mems: number of internal memory regions * @num_timers: number of rproc timer(s) * @timers: timer(s) info used by rproc + * @autosuspend_delay: auto-suspend delay value to be used for runtime pm + * @need_resume: if true a resume is needed in the system resume callback * @rproc: rproc handle * @reset: reset handle * @pm_comp: completion primitive to sync for suspend response @@ -97,6 +103,8 @@ struct omap_rproc { int num_mems; int num_timers; struct omap_rproc_timer *timers; + int autosuspend_delay; + bool need_resume; struct rproc *rproc; struct reset_control *reset; struct completion pm_comp; @@ -407,11 +415,23 @@ static void omap_rproc_kick(struct rproc *rproc, int vqid) struct device *dev = rproc->dev.parent; int ret; + /* wake up the rproc before kicking it */ + ret = pm_runtime_get_sync(dev); + if (WARN_ON(ret < 0)) { + dev_err(dev, "pm_runtime_get_sync() failed during kick, ret = %d\n", + ret); + pm_runtime_put_noidle(dev); + return; + } + /* send the index of the triggered virtqueue in the mailbox payload */ ret = mbox_send_message(oproc->mbox, (void *)vqid); if (ret < 0) dev_err(dev, "failed to send mailbox message, status = %d\n", ret); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); } /** @@ -502,6 +522,18 @@ static int omap_rproc_start(struct rproc *rproc) goto disable_timers; } + /* + * remote processor is up, so update the runtime pm status and + * enable the auto-suspend. The device usage count is incremented + * manually for balancing it for auto-suspend + */ + pm_runtime_set_active(dev); + pm_runtime_use_autosuspend(dev); + pm_runtime_get_noresume(dev); + pm_runtime_enable(dev); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + return 0; disable_timers: @@ -514,20 +546,52 @@ static int omap_rproc_start(struct rproc *rproc) /* power off the remote processor */ static int omap_rproc_stop(struct rproc *rproc) { + struct device *dev = rproc->dev.parent; struct omap_rproc *oproc = rproc->priv; int ret; + /* + * cancel any possible scheduled runtime suspend by incrementing + * the device usage count, and resuming the device. The remoteproc + * also needs to be woken up if suspended, to avoid the remoteproc + * OS to continue to remember any context that it has saved, and + * avoid potential issues in misindentifying a subsequent device + * reboot as a power restore boot + */ + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + pm_runtime_put_noidle(dev); + return ret; + } + ret = reset_control_assert(oproc->reset); if (ret) - return ret; + goto out; ret = omap_rproc_disable_timers(rproc, true); if (ret) - return ret; + goto enable_device; mbox_free_channel(oproc->mbox); + /* + * update the runtime pm states and status now that the remoteproc + * has stopped + */ + pm_runtime_disable(dev); + pm_runtime_dont_use_autosuspend(dev); + pm_runtime_put_noidle(dev); + pm_runtime_set_suspended(dev); + return 0; + +enable_device: + reset_control_deassert(oproc->reset); +out: + /* schedule the next auto-suspend */ + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + return ret; } /** @@ -584,17 +648,19 @@ static bool _is_rproc_in_standby(struct omap_rproc *oproc) /* 1 sec is long enough time to let the remoteproc side suspend the device */ #define DEF_SUSPEND_TIMEOUT 1000 -static int _omap_rproc_suspend(struct rproc *rproc) +static int _omap_rproc_suspend(struct rproc *rproc, bool auto_suspend) { struct device *dev = rproc->dev.parent; struct omap_rproc *oproc = rproc->priv; unsigned long to = msecs_to_jiffies(DEF_SUSPEND_TIMEOUT); unsigned long ta = jiffies + to; + u32 suspend_msg = auto_suspend ? + RP_MBOX_SUSPEND_AUTO : RP_MBOX_SUSPEND_SYSTEM; int ret; reinit_completion(&oproc->pm_comp); oproc->suspend_acked = false; - ret = mbox_send_message(oproc->mbox, (void *)RP_MBOX_SUSPEND_SYSTEM); + ret = mbox_send_message(oproc->mbox, (void *)suspend_msg); if (ret < 0) { dev_err(dev, "PM mbox_send_message failed: %d\n", ret); return ret; @@ -638,32 +704,62 @@ static int _omap_rproc_suspend(struct rproc *rproc) goto enable_device; } + /* + * IOMMUs would have to be disabled specifically for runtime suspend. + * They are handled automatically through System PM callbacks for + * regular system suspend + */ + if (auto_suspend) { + ret = omap_iommu_domain_deactivate(rproc->domain); + if (ret) { + dev_err(dev, "iommu domain deactivate failed %d\n", + ret); + goto enable_timers; + } + } + return 0; +enable_timers: + /* ignore errors on re-enabling code */ + omap_rproc_enable_timers(rproc, false); enable_device: reset_control_deassert(oproc->reset); return ret; } -static int _omap_rproc_resume(struct rproc *rproc) +static int _omap_rproc_resume(struct rproc *rproc, bool auto_suspend) { struct device *dev = rproc->dev.parent; struct omap_rproc *oproc = rproc->priv; int ret; + /* + * IOMMUs would have to be enabled specifically for runtime resume. + * They would have been already enabled automatically through System + * PM callbacks for regular system resume + */ + if (auto_suspend) { + ret = omap_iommu_domain_activate(rproc->domain); + if (ret) { + dev_err(dev, "omap_iommu activate failed %d\n", ret); + goto out; + } + } + /* boot address could be lost after suspend, so restore it */ if (oproc->boot_data) { ret = omap_rproc_write_dsp_boot_addr(rproc); if (ret) { dev_err(dev, "boot address restore failed %d\n", ret); - goto out; + goto suspend_iommu; } } ret = omap_rproc_enable_timers(rproc, false); if (ret) { dev_err(dev, "enabling timers during resume failed %d\n", ret); - goto out; + goto suspend_iommu; } ret = reset_control_deassert(oproc->reset); @@ -676,6 +772,9 @@ static int _omap_rproc_resume(struct rproc *rproc) disable_timers: omap_rproc_disable_timers(rproc, false); +suspend_iommu: + if (auto_suspend) + omap_iommu_domain_deactivate(rproc->domain); out: return ret; } @@ -684,6 +783,7 @@ static int __maybe_unused omap_rproc_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct rproc *rproc = platform_get_drvdata(pdev); + struct omap_rproc *oproc = rproc->priv; int ret = 0; mutex_lock(&rproc->lock); @@ -698,13 +798,19 @@ static int __maybe_unused omap_rproc_suspend(struct device *dev) goto out; } - ret = _omap_rproc_suspend(rproc); + ret = _omap_rproc_suspend(rproc, false); if (ret) { dev_err(dev, "suspend failed %d\n", ret); goto out; } + /* + * remoteproc is running at the time of system suspend, so remember + * it so as to wake it up during system resume + */ + oproc->need_resume = true; rproc->state = RPROC_SUSPENDED; + out: mutex_unlock(&rproc->lock); return ret; @@ -714,6 +820,7 @@ static int __maybe_unused omap_rproc_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct rproc *rproc = platform_get_drvdata(pdev); + struct omap_rproc *oproc = rproc->priv; int ret = 0; mutex_lock(&rproc->lock); @@ -725,12 +832,91 @@ static int __maybe_unused omap_rproc_resume(struct device *dev) goto out; } - ret = _omap_rproc_resume(rproc); + /* + * remoteproc was auto-suspended at the time of system suspend, + * so no need to wake-up the processor (leave it in suspended + * state, will be woken up during a subsequent runtime_resume) + */ + if (!oproc->need_resume) + goto out; + + ret = _omap_rproc_resume(rproc, false); if (ret) { dev_err(dev, "resume failed %d\n", ret); goto out; } + oproc->need_resume = false; + rproc->state = RPROC_RUNNING; + + pm_runtime_mark_last_busy(dev); +out: + mutex_unlock(&rproc->lock); + return ret; +} + +static int omap_rproc_runtime_suspend(struct device *dev) +{ + struct rproc *rproc = dev_get_drvdata(dev); + struct omap_rproc *oproc = rproc->priv; + int ret; + + mutex_lock(&rproc->lock); + if (rproc->state == RPROC_CRASHED) { + dev_dbg(dev, "rproc cannot be runtime suspended when crashed!\n"); + ret = -EBUSY; + goto out; + } + + if (WARN_ON(rproc->state != RPROC_RUNNING)) { + dev_err(dev, "rproc cannot be runtime suspended when not running!\n"); + ret = -EBUSY; + goto out; + } + + /* + * do not even attempt suspend if the remote processor is not + * idled for runtime auto-suspend + */ + if (!_is_rproc_in_standby(oproc)) { + ret = -EBUSY; + goto abort; + } + + ret = _omap_rproc_suspend(rproc, true); + if (ret) + goto abort; + + rproc->state = RPROC_SUSPENDED; + mutex_unlock(&rproc->lock); + return 0; + +abort: + pm_runtime_mark_last_busy(dev); +out: + mutex_unlock(&rproc->lock); + return ret; +} + +static int omap_rproc_runtime_resume(struct device *dev) +{ + struct rproc *rproc = dev_get_drvdata(dev); + int ret; + + mutex_lock(&rproc->lock); + if (WARN_ON(rproc->state != RPROC_SUSPENDED)) { + dev_err(dev, "rproc cannot be runtime resumed if not suspended! state=%d\n", + rproc->state); + ret = -EBUSY; + goto out; + } + + ret = _omap_rproc_resume(rproc, true); + if (ret) { + dev_err(dev, "runtime resume failed %d\n", ret); + goto out; + } + rproc->state = RPROC_RUNNING; out: mutex_unlock(&rproc->lock); @@ -997,6 +1183,12 @@ static int omap_rproc_probe(struct platform_device *pdev) goto free_rproc; init_completion(&oproc->pm_comp); + oproc->autosuspend_delay = DEFAULT_AUTOSUSPEND_DELAY; + + of_property_read_u32(pdev->dev.of_node, "ti,autosuspend-delay-ms", + &oproc->autosuspend_delay); + + pm_runtime_set_autosuspend_delay(&pdev->dev, oproc->autosuspend_delay); oproc->fck = devm_clk_get(&pdev->dev, 0); if (IS_ERR(oproc->fck)) { @@ -1039,6 +1231,8 @@ static int omap_rproc_remove(struct platform_device *pdev) static const struct dev_pm_ops omap_rproc_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(omap_rproc_suspend, omap_rproc_resume) + SET_RUNTIME_PM_OPS(omap_rproc_runtime_suspend, + omap_rproc_runtime_resume, NULL) }; static struct platform_driver omap_rproc_driver = {