@@ -54,6 +54,10 @@
#define MT8192_CORE0_WDT_IRQ 0x10030
#define MT8192_CORE0_WDT_CFG 0x10034
+#define MT8195_SYS_STATUS 0x4004
+#define MT8195_CORE0_WDT BIT(16)
+#define MT8195_CORE1_WDT BIT(17)
+
#define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS GENMASK(7, 4)
#define SCP_FW_VER_LEN 32
@@ -212,6 +212,31 @@ static void mt8192_scp_irq_handler(struct mtk_scp *scp)
}
}
+static void mt8195_scp_irq_handler(struct mtk_scp *scp)
+{
+ u32 scp_to_host;
+
+ scp_to_host = readl(scp->reg_base + MT8192_SCP2APMCU_IPC_SET);
+
+ if (scp_to_host & MT8192_SCP_IPC_INT_BIT) {
+ scp_ipi_handler(scp);
+
+ /*
+ * SCP won't send another interrupt until we clear
+ * MT8192_SCP2APMCU_IPC.
+ */
+ writel(MT8192_SCP_IPC_INT_BIT,
+ scp->reg_base + MT8192_SCP2APMCU_IPC_CLR);
+ } else {
+ if (readl(scp->reg_base + MT8195_SYS_STATUS) & MT8195_CORE1_WDT) {
+ writel(1, scp->reg_base + MT8195_CORE1_WDT_IRQ);
+ } else {
+ writel(1, scp->reg_base + MT8192_CORE0_WDT_IRQ);
+ scp_wdt_handler(scp, scp_to_host);
+ }
+ }
+}
+
static irqreturn_t scp_irq_handler(int irq, void *priv)
{
struct mtk_scp *scp = priv;
@@ -961,7 +986,7 @@ static const struct mtk_scp_of_data mt8192_of_data = {
static const struct mtk_scp_of_data mt8195_of_data = {
.scp_clk_get = mt8195_scp_clk_get,
.scp_before_load = mt8195_scp_before_load,
- .scp_irq_handler = mt8192_scp_irq_handler,
+ .scp_irq_handler = mt8195_scp_irq_handler,
.scp_reset_assert = mt8192_scp_reset_assert,
.scp_reset_deassert = mt8192_scp_reset_deassert,
.scp_stop = mt8195_scp_stop,
MT8195 SCP is a dual-core processor. The SCP core 1 watchdog timeout interrupt uses the same interrupt line of SCP core 0 watchdog timeout interrupt. Add support for handling SCP core 1 watchdog timeout interrupt in the SCP IRQ handler. Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> --- drivers/remoteproc/mtk_common.h | 4 ++++ drivers/remoteproc/mtk_scp.c | 27 ++++++++++++++++++++++++++- 2 files changed, 30 insertions(+), 1 deletion(-)