Message ID | 20220713113612.2117279-5-arnaud.pouliquen@foss.st.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | remoteproc: restructure the remoteproc VirtIO device | expand |
On Wed, Jul 13, 2022 at 01:36:12PM +0200, Arnaud Pouliquen wrote: > Define a platform driver to manage the remoteproc virtio device as > a platform devices. > > The platform device allows to pass rproc_vdev_data platform data to > specify properties that are stored in the rproc_vdev structure. > > Such approach will allow to preserve legacy remoteproc virtio device > creation but also to probe the device using device tree mechanism. > > remoteproc_virtio.c update: > - Add rproc_virtio_driver platform driver. The probe ops replaces > the rproc_rvdev_add_device function. > - All reference to the rvdev->dev has been updated to rvdev-pdev->dev. > - rproc_rvdev_release is removed as associated to the rvdev device. > - The use of rvdev->kref counter is replaced by get/put_device on the > remoteproc virtio platform device. > - The vdev device no longer increments rproc device counter. > increment/decrement is done in rproc_virtio_probe/rproc_virtio_remove > function in charge of the vrings allocation/free. > > remoteproc_core.c update: > Migrate from the rvdev device to the rvdev platform device. > From this patch, when a vdev resource is found in the resource table > the remoteproc core register a platform device. > > Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > > --- > Update vs previous revision: > - update commit message to remove reference to rproc_rvdev_remove_device. > > --- > drivers/remoteproc/remoteproc_core.c | 12 +- > drivers/remoteproc/remoteproc_internal.h | 2 - > drivers/remoteproc/remoteproc_virtio.c | 141 ++++++++++++----------- > include/linux/remoteproc.h | 6 +- Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> > 4 files changed, 81 insertions(+), 80 deletions(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index d3eca1da8aa1..f5f2f500a50e 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -478,6 +478,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > struct device *dev = &rproc->dev; > struct rproc_vdev *rvdev; > struct rproc_vdev_data rvdev_data; > + struct platform_device *pdev; > > /* make sure resource isn't truncated */ > if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len > > @@ -506,9 +507,12 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > rvdev_data.rsc_offset = offset; > rvdev_data.rsc = rsc; > > - rvdev = rproc_rvdev_add_device(rproc, &rvdev_data); > - if (IS_ERR(rvdev)) > - return PTR_ERR(rvdev); > + pdev = platform_device_register_data(dev, "rproc-virtio", rvdev_data.index, &rvdev_data, > + sizeof(rvdev_data)); > + if (IS_ERR(pdev)) { > + dev_err(dev, "failed to create rproc-virtio device\n"); > + return PTR_ERR(pdev); > + } > > return 0; > } > @@ -1244,7 +1248,7 @@ void rproc_resource_cleanup(struct rproc *rproc) > > /* clean up remote vdev entries */ > list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node) > - kref_put(&rvdev->refcount, rproc_vdev_release); > + platform_device_unregister(rvdev->pdev); > > rproc_coredump_cleanup(rproc); > } > diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h > index 711b0e1f2118..bf1fb7bba1a3 100644 > --- a/drivers/remoteproc/remoteproc_internal.h > +++ b/drivers/remoteproc/remoteproc_internal.h > @@ -45,9 +45,7 @@ int rproc_of_parse_firmware(struct device *dev, int index, > const char **fw_name); > > /* from remoteproc_virtio.c */ > -struct rproc_vdev *rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data); > irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id); > -void rproc_vdev_release(struct kref *ref); > > /* from remoteproc_debugfs.c */ > void rproc_remove_trace_file(struct dentry *tfile); > diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c > index ccc95d4e42cf..06d2131dad11 100644 > --- a/drivers/remoteproc/remoteproc_virtio.c > +++ b/drivers/remoteproc/remoteproc_virtio.c > @@ -13,6 +13,7 @@ > #include <linux/dma-map-ops.h> > #include <linux/dma-mapping.h> > #include <linux/export.h> > +#include <linux/of_platform.h> > #include <linux/of_reserved_mem.h> > #include <linux/remoteproc.h> > #include <linux/virtio.h> > @@ -46,7 +47,11 @@ static int copy_dma_range_map(struct device *to, struct device *from) > > static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev) > { > - return container_of(vdev->dev.parent, struct rproc_vdev, dev); > + struct platform_device *pdev; > + > + pdev = container_of(vdev->dev.parent, struct platform_device, dev); > + > + return platform_get_drvdata(pdev); > } > > static struct rproc *vdev_to_rproc(struct virtio_device *vdev) > @@ -341,13 +346,10 @@ static void rproc_virtio_dev_release(struct device *dev) > { > struct virtio_device *vdev = dev_to_virtio(dev); > struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); > - struct rproc *rproc = vdev_to_rproc(vdev); > > kfree(vdev); > > - kref_put(&rvdev->refcount, rproc_vdev_release); > - > - put_device(&rproc->dev); > + put_device(&rvdev->pdev->dev); > } > > /** > @@ -363,7 +365,7 @@ static void rproc_virtio_dev_release(struct device *dev) > static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) > { > struct rproc *rproc = rvdev->rproc; > - struct device *dev = &rvdev->dev; > + struct device *dev = &rvdev->pdev->dev; > struct virtio_device *vdev; > struct rproc_mem_entry *mem; > int ret; > @@ -433,18 +435,8 @@ static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) > vdev->dev.parent = dev; > vdev->dev.release = rproc_virtio_dev_release; > > - /* > - * We're indirectly making a non-temporary copy of the rproc pointer > - * here, because drivers probed with this vdev will indirectly > - * access the wrapping rproc. > - * > - * Therefore we must increment the rproc refcount here, and decrement > - * it _only_ when the vdev is released. > - */ > - get_device(&rproc->dev); > - > /* Reference the vdev and vring allocations */ > - kref_get(&rvdev->refcount); > + get_device(dev); > > ret = register_virtio_device(vdev); > if (ret) { > @@ -486,78 +478,57 @@ static int rproc_vdev_do_start(struct rproc_subdev *subdev) > static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed) > { > struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev); > + struct device *dev = &rvdev->pdev->dev; > int ret; > > - ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev); > + ret = device_for_each_child(dev, NULL, rproc_remove_virtio_dev); > if (ret) > - dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret); > + dev_warn(dev, "can't remove vdev child device: %d\n", ret); > } > > -/** > - * rproc_rvdev_release() - release the existence of a rvdev > - * > - * @dev: the subdevice's dev > - */ > -static void rproc_rvdev_release(struct device *dev) > -{ > - struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev); > - > - of_reserved_mem_device_release(dev); > - > - kfree(rvdev); > -} > - > -struct rproc_vdev * > -rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data) > +static int rproc_virtio_probe(struct platform_device *pdev) > { > + struct device *dev = &pdev->dev; > + struct rproc_vdev_data *rvdev_data = dev->platform_data; > struct rproc_vdev *rvdev; > - struct fw_rsc_vdev *rsc = rvdev_data->rsc; > - char name[16]; > + struct rproc *rproc = container_of(dev->parent, struct rproc, dev); > + struct fw_rsc_vdev *rsc; > int i, ret; > > - rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL); > - if (!rvdev) > - return ERR_PTR(-ENOMEM); > + if (!rvdev_data) > + return -EINVAL; > > - kref_init(&rvdev->refcount); > + rvdev = devm_kzalloc(dev, sizeof(*rvdev), GFP_KERNEL); > + if (!rvdev) > + return -ENOMEM; > > rvdev->id = rvdev_data->id; > rvdev->rproc = rproc; > rvdev->index = rvdev_data->index; > > - /* Initialise vdev subdevice */ > - snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); > - rvdev->dev.parent = &rproc->dev; > - rvdev->dev.release = rproc_rvdev_release; > - dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name); > - dev_set_drvdata(&rvdev->dev, rvdev); > - > - ret = device_register(&rvdev->dev); > - if (ret) { > - put_device(&rvdev->dev); > - return ERR_PTR(ret); > - } > - > - ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent); > + ret = copy_dma_range_map(dev, rproc->dev.parent); > if (ret) > - goto free_rvdev; > + return ret; > > /* Make device dma capable by inheriting from parent's capabilities */ > - set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent)); > + set_dma_ops(dev, get_dma_ops(rproc->dev.parent)); > > - ret = dma_coerce_mask_and_coherent(&rvdev->dev, > - dma_get_mask(rproc->dev.parent)); > + ret = dma_coerce_mask_and_coherent(dev, dma_get_mask(rproc->dev.parent)); > if (ret) { > - dev_warn(&rvdev->dev, > - "Failed to set DMA mask %llx. Trying to continue... (%pe)\n", > + dev_warn(dev, "Failed to set DMA mask %llx. Trying to continue... (%pe)\n", > dma_get_mask(rproc->dev.parent), ERR_PTR(ret)); > } > > + platform_set_drvdata(pdev, rvdev); > + rvdev->pdev = pdev; > + > + rsc = rvdev_data->rsc; > + > /* parse the vrings */ > for (i = 0; i < rsc->num_of_vrings; i++) { > ret = rproc_parse_vring(rvdev, rsc, i); > if (ret) > - goto free_rvdev; > + return ret; > } > > /* remember the resource offset*/ > @@ -577,21 +548,30 @@ rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data) > > rproc_add_subdev(rproc, &rvdev->subdev); > > - return rvdev; > + /* > + * We're indirectly making a non-temporary copy of the rproc pointer > + * here, because the platform device or the vdev device will indirectly > + * access the wrapping rproc. > + * > + * Therefore we must increment the rproc refcount here, and decrement > + * it _only_ on platform remove. > + */ > + get_device(&rproc->dev); > + > + return 0; > > unwind_vring_allocations: > for (i--; i >= 0; i--) > rproc_free_vring(&rvdev->vring[i]); > -free_rvdev: > - device_unregister(&rvdev->dev); > - return ERR_PTR(ret); > + > + return ret; > } > > -void rproc_vdev_release(struct kref *ref) > +static int rproc_virtio_remove(struct platform_device *pdev) > { > - struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount); > - struct rproc_vring *rvring; > + struct rproc_vdev *rvdev = dev_get_drvdata(&pdev->dev); > struct rproc *rproc = rvdev->rproc; > + struct rproc_vring *rvring; > int id; > > for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) { > @@ -601,5 +581,26 @@ void rproc_vdev_release(struct kref *ref) > > rproc_remove_subdev(rproc, &rvdev->subdev); > rproc_remove_rvdev(rvdev); > - device_unregister(&rvdev->dev); > + > + of_reserved_mem_device_release(&pdev->dev); > + > + put_device(&rproc->dev); > + > + return 0; > } > + > +/* Platform driver */ > +static const struct of_device_id rproc_virtio_match[] = { > + { .compatible = "virtio,rproc", }, > + {}, > +}; > + > +static struct platform_driver rproc_virtio_driver = { > + .probe = rproc_virtio_probe, > + .remove = rproc_virtio_remove, > + .driver = { > + .name = "rproc-virtio", > + .of_match_table = rproc_virtio_match, > + }, > +}; > +builtin_platform_driver(rproc_virtio_driver); > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h > index 7c943f0a2fc4..64b9809d0ec1 100644 > --- a/include/linux/remoteproc.h > +++ b/include/linux/remoteproc.h > @@ -616,9 +616,8 @@ struct rproc_vring { > > /** > * struct rproc_vdev - remoteproc state for a supported virtio device > - * @refcount: reference counter for the vdev and vring allocations > * @subdev: handle for registering the vdev as a rproc subdevice > - * @dev: device struct used for reference count semantics > + * @pdev: remoteproc virtio platform device > * @id: virtio device id (as in virtio_ids.h) > * @node: list node > * @rproc: the rproc handle > @@ -627,10 +626,9 @@ struct rproc_vring { > * @index: vdev position versus other vdev declared in resource table > */ > struct rproc_vdev { > - struct kref refcount; > > struct rproc_subdev subdev; > - struct device dev; > + struct platform_device *pdev; > > unsigned int id; > struct list_head node; > -- > 2.24.3 >
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index d3eca1da8aa1..f5f2f500a50e 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -478,6 +478,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, struct device *dev = &rproc->dev; struct rproc_vdev *rvdev; struct rproc_vdev_data rvdev_data; + struct platform_device *pdev; /* make sure resource isn't truncated */ if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len > @@ -506,9 +507,12 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, rvdev_data.rsc_offset = offset; rvdev_data.rsc = rsc; - rvdev = rproc_rvdev_add_device(rproc, &rvdev_data); - if (IS_ERR(rvdev)) - return PTR_ERR(rvdev); + pdev = platform_device_register_data(dev, "rproc-virtio", rvdev_data.index, &rvdev_data, + sizeof(rvdev_data)); + if (IS_ERR(pdev)) { + dev_err(dev, "failed to create rproc-virtio device\n"); + return PTR_ERR(pdev); + } return 0; } @@ -1244,7 +1248,7 @@ void rproc_resource_cleanup(struct rproc *rproc) /* clean up remote vdev entries */ list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node) - kref_put(&rvdev->refcount, rproc_vdev_release); + platform_device_unregister(rvdev->pdev); rproc_coredump_cleanup(rproc); } diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h index 711b0e1f2118..bf1fb7bba1a3 100644 --- a/drivers/remoteproc/remoteproc_internal.h +++ b/drivers/remoteproc/remoteproc_internal.h @@ -45,9 +45,7 @@ int rproc_of_parse_firmware(struct device *dev, int index, const char **fw_name); /* from remoteproc_virtio.c */ -struct rproc_vdev *rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data); irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id); -void rproc_vdev_release(struct kref *ref); /* from remoteproc_debugfs.c */ void rproc_remove_trace_file(struct dentry *tfile); diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c index ccc95d4e42cf..06d2131dad11 100644 --- a/drivers/remoteproc/remoteproc_virtio.c +++ b/drivers/remoteproc/remoteproc_virtio.c @@ -13,6 +13,7 @@ #include <linux/dma-map-ops.h> #include <linux/dma-mapping.h> #include <linux/export.h> +#include <linux/of_platform.h> #include <linux/of_reserved_mem.h> #include <linux/remoteproc.h> #include <linux/virtio.h> @@ -46,7 +47,11 @@ static int copy_dma_range_map(struct device *to, struct device *from) static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev) { - return container_of(vdev->dev.parent, struct rproc_vdev, dev); + struct platform_device *pdev; + + pdev = container_of(vdev->dev.parent, struct platform_device, dev); + + return platform_get_drvdata(pdev); } static struct rproc *vdev_to_rproc(struct virtio_device *vdev) @@ -341,13 +346,10 @@ static void rproc_virtio_dev_release(struct device *dev) { struct virtio_device *vdev = dev_to_virtio(dev); struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); - struct rproc *rproc = vdev_to_rproc(vdev); kfree(vdev); - kref_put(&rvdev->refcount, rproc_vdev_release); - - put_device(&rproc->dev); + put_device(&rvdev->pdev->dev); } /** @@ -363,7 +365,7 @@ static void rproc_virtio_dev_release(struct device *dev) static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) { struct rproc *rproc = rvdev->rproc; - struct device *dev = &rvdev->dev; + struct device *dev = &rvdev->pdev->dev; struct virtio_device *vdev; struct rproc_mem_entry *mem; int ret; @@ -433,18 +435,8 @@ static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) vdev->dev.parent = dev; vdev->dev.release = rproc_virtio_dev_release; - /* - * We're indirectly making a non-temporary copy of the rproc pointer - * here, because drivers probed with this vdev will indirectly - * access the wrapping rproc. - * - * Therefore we must increment the rproc refcount here, and decrement - * it _only_ when the vdev is released. - */ - get_device(&rproc->dev); - /* Reference the vdev and vring allocations */ - kref_get(&rvdev->refcount); + get_device(dev); ret = register_virtio_device(vdev); if (ret) { @@ -486,78 +478,57 @@ static int rproc_vdev_do_start(struct rproc_subdev *subdev) static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed) { struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev); + struct device *dev = &rvdev->pdev->dev; int ret; - ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev); + ret = device_for_each_child(dev, NULL, rproc_remove_virtio_dev); if (ret) - dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret); + dev_warn(dev, "can't remove vdev child device: %d\n", ret); } -/** - * rproc_rvdev_release() - release the existence of a rvdev - * - * @dev: the subdevice's dev - */ -static void rproc_rvdev_release(struct device *dev) -{ - struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev); - - of_reserved_mem_device_release(dev); - - kfree(rvdev); -} - -struct rproc_vdev * -rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data) +static int rproc_virtio_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; + struct rproc_vdev_data *rvdev_data = dev->platform_data; struct rproc_vdev *rvdev; - struct fw_rsc_vdev *rsc = rvdev_data->rsc; - char name[16]; + struct rproc *rproc = container_of(dev->parent, struct rproc, dev); + struct fw_rsc_vdev *rsc; int i, ret; - rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL); - if (!rvdev) - return ERR_PTR(-ENOMEM); + if (!rvdev_data) + return -EINVAL; - kref_init(&rvdev->refcount); + rvdev = devm_kzalloc(dev, sizeof(*rvdev), GFP_KERNEL); + if (!rvdev) + return -ENOMEM; rvdev->id = rvdev_data->id; rvdev->rproc = rproc; rvdev->index = rvdev_data->index; - /* Initialise vdev subdevice */ - snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); - rvdev->dev.parent = &rproc->dev; - rvdev->dev.release = rproc_rvdev_release; - dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name); - dev_set_drvdata(&rvdev->dev, rvdev); - - ret = device_register(&rvdev->dev); - if (ret) { - put_device(&rvdev->dev); - return ERR_PTR(ret); - } - - ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent); + ret = copy_dma_range_map(dev, rproc->dev.parent); if (ret) - goto free_rvdev; + return ret; /* Make device dma capable by inheriting from parent's capabilities */ - set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent)); + set_dma_ops(dev, get_dma_ops(rproc->dev.parent)); - ret = dma_coerce_mask_and_coherent(&rvdev->dev, - dma_get_mask(rproc->dev.parent)); + ret = dma_coerce_mask_and_coherent(dev, dma_get_mask(rproc->dev.parent)); if (ret) { - dev_warn(&rvdev->dev, - "Failed to set DMA mask %llx. Trying to continue... (%pe)\n", + dev_warn(dev, "Failed to set DMA mask %llx. Trying to continue... (%pe)\n", dma_get_mask(rproc->dev.parent), ERR_PTR(ret)); } + platform_set_drvdata(pdev, rvdev); + rvdev->pdev = pdev; + + rsc = rvdev_data->rsc; + /* parse the vrings */ for (i = 0; i < rsc->num_of_vrings; i++) { ret = rproc_parse_vring(rvdev, rsc, i); if (ret) - goto free_rvdev; + return ret; } /* remember the resource offset*/ @@ -577,21 +548,30 @@ rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data) rproc_add_subdev(rproc, &rvdev->subdev); - return rvdev; + /* + * We're indirectly making a non-temporary copy of the rproc pointer + * here, because the platform device or the vdev device will indirectly + * access the wrapping rproc. + * + * Therefore we must increment the rproc refcount here, and decrement + * it _only_ on platform remove. + */ + get_device(&rproc->dev); + + return 0; unwind_vring_allocations: for (i--; i >= 0; i--) rproc_free_vring(&rvdev->vring[i]); -free_rvdev: - device_unregister(&rvdev->dev); - return ERR_PTR(ret); + + return ret; } -void rproc_vdev_release(struct kref *ref) +static int rproc_virtio_remove(struct platform_device *pdev) { - struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount); - struct rproc_vring *rvring; + struct rproc_vdev *rvdev = dev_get_drvdata(&pdev->dev); struct rproc *rproc = rvdev->rproc; + struct rproc_vring *rvring; int id; for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) { @@ -601,5 +581,26 @@ void rproc_vdev_release(struct kref *ref) rproc_remove_subdev(rproc, &rvdev->subdev); rproc_remove_rvdev(rvdev); - device_unregister(&rvdev->dev); + + of_reserved_mem_device_release(&pdev->dev); + + put_device(&rproc->dev); + + return 0; } + +/* Platform driver */ +static const struct of_device_id rproc_virtio_match[] = { + { .compatible = "virtio,rproc", }, + {}, +}; + +static struct platform_driver rproc_virtio_driver = { + .probe = rproc_virtio_probe, + .remove = rproc_virtio_remove, + .driver = { + .name = "rproc-virtio", + .of_match_table = rproc_virtio_match, + }, +}; +builtin_platform_driver(rproc_virtio_driver); diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index 7c943f0a2fc4..64b9809d0ec1 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -616,9 +616,8 @@ struct rproc_vring { /** * struct rproc_vdev - remoteproc state for a supported virtio device - * @refcount: reference counter for the vdev and vring allocations * @subdev: handle for registering the vdev as a rproc subdevice - * @dev: device struct used for reference count semantics + * @pdev: remoteproc virtio platform device * @id: virtio device id (as in virtio_ids.h) * @node: list node * @rproc: the rproc handle @@ -627,10 +626,9 @@ struct rproc_vring { * @index: vdev position versus other vdev declared in resource table */ struct rproc_vdev { - struct kref refcount; struct rproc_subdev subdev; - struct device dev; + struct platform_device *pdev; unsigned int id; struct list_head node;
Define a platform driver to manage the remoteproc virtio device as a platform devices. The platform device allows to pass rproc_vdev_data platform data to specify properties that are stored in the rproc_vdev structure. Such approach will allow to preserve legacy remoteproc virtio device creation but also to probe the device using device tree mechanism. remoteproc_virtio.c update: - Add rproc_virtio_driver platform driver. The probe ops replaces the rproc_rvdev_add_device function. - All reference to the rvdev->dev has been updated to rvdev-pdev->dev. - rproc_rvdev_release is removed as associated to the rvdev device. - The use of rvdev->kref counter is replaced by get/put_device on the remoteproc virtio platform device. - The vdev device no longer increments rproc device counter. increment/decrement is done in rproc_virtio_probe/rproc_virtio_remove function in charge of the vrings allocation/free. remoteproc_core.c update: Migrate from the rvdev device to the rvdev platform device. From this patch, when a vdev resource is found in the resource table the remoteproc core register a platform device. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> --- Update vs previous revision: - update commit message to remove reference to rproc_rvdev_remove_device. --- drivers/remoteproc/remoteproc_core.c | 12 +- drivers/remoteproc/remoteproc_internal.h | 2 - drivers/remoteproc/remoteproc_virtio.c | 141 ++++++++++++----------- include/linux/remoteproc.h | 6 +- 4 files changed, 81 insertions(+), 80 deletions(-)