diff mbox series

[v3,5/7] remoteproc: qcom_q6v5_mss: Add support for MSM8909

Message ID 20220831134626.2803117-6-stephan.gerhold@kernkonzept.com (mailing list archive)
State Superseded
Headers show
Series remoteproc: qcom_q6v5_mss: Add MSM8909 and MSM8953 | expand

Commit Message

Stephan Gerhold Aug. 31, 2022, 1:46 p.m. UTC
Port the initialization sequence necessary for booting the modem remote
processor on the MSM8909 SoC from Qualcomm's msm-3.10 release [1].
The sequence is actually similar to the existing one for MSM8996 and
MSM8998 except that there is no separate QDSP6SS_MEM_PWR_CTL register
and most of the "memories" are enabled at once instead of sequentially.

To reuse the existing code just insert some if statements where needed
and add a configuration similar to the one from MSM8916.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/commit/56dcedc8dac8abff6b007f76a29430b2d0a44704

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
---
Changes in v3: None
Changes in v2: None
---
 drivers/remoteproc/qcom_q6v5_mss.c | 123 +++++++++++++++++++++--------
 1 file changed, 90 insertions(+), 33 deletions(-)
diff mbox series

Patch

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index fddb63cffee0..2555f06dfc74 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -111,6 +111,9 @@ 
 #define QDSS_BHS_ON			BIT(21)
 #define QDSS_LDO_BYP			BIT(22)
 
+/* QDSP6v55 parameters */
+#define QDSP6V55_MEM_BITS		GENMASK(16, 8)
+
 /* QDSP6v56 parameters */
 #define QDSP6v56_LDO_BYP		BIT(25)
 #define QDSP6v56_BHS_ON		BIT(24)
@@ -234,6 +237,7 @@  struct q6v5 {
 };
 
 enum {
+	MSS_MSM8909,
 	MSS_MSM8916,
 	MSS_MSM8974,
 	MSS_MSM8996,
@@ -687,13 +691,14 @@  static int q6v5proc_reset(struct q6v5 *qproc)
 			return ret;
 		}
 		goto pbl_wait;
-	} else if (qproc->version == MSS_MSM8996 ||
+	} else if (qproc->version == MSS_MSM8909 ||
+		   qproc->version == MSS_MSM8996 ||
 		   qproc->version == MSS_MSM8998) {
-		int mem_pwr_ctl;
 
-		/* Override the ACC value if required */
-		writel(QDSP6SS_ACC_OVERRIDE_VAL,
-		       qproc->reg_base + QDSP6SS_STRAP_ACC);
+		if (qproc->version != MSS_MSM8909)
+			/* Override the ACC value if required */
+			writel(QDSP6SS_ACC_OVERRIDE_VAL,
+			       qproc->reg_base + QDSP6SS_STRAP_ACC);
 
 		/* Assert resets, stop core */
 		val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
@@ -725,36 +730,53 @@  static int q6v5proc_reset(struct q6v5 *qproc)
 		val |= QDSP6v56_LDO_BYP;
 		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 
-		/* Deassert QDSP6 compiler memory clamp */
-		val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-		val &= ~QDSP6v56_CLAMP_QMC_MEM;
-		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-
-		/* Deassert memory peripheral sleep and L2 memory standby */
-		val |= Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N;
-		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-
-		/* Turn on L1, L2, ETB and JU memories 1 at a time */
-		if (qproc->version == MSS_MSM8996) {
-			mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
-			i = 19;
+		if (qproc->version != MSS_MSM8909) {
+			int mem_pwr_ctl;
+
+			/* Deassert QDSP6 compiler memory clamp */
+			val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+			val &= ~QDSP6v56_CLAMP_QMC_MEM;
+			writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+			/* Deassert memory peripheral sleep and L2 memory standby */
+			val |= Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N;
+			writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+			/* Turn on L1, L2, ETB and JU memories 1 at a time */
+			if (qproc->version == MSS_MSM8996) {
+				mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
+				i = 19;
+			} else {
+				/* MSS_MSM8998 */
+				mem_pwr_ctl = QDSP6V6SS_MEM_PWR_CTL;
+				i = 28;
+			}
+			val = readl(qproc->reg_base + mem_pwr_ctl);
+			for (; i >= 0; i--) {
+				val |= BIT(i);
+				writel(val, qproc->reg_base + mem_pwr_ctl);
+				/*
+				 * Read back value to ensure the write is done then
+				 * wait for 1us for both memory peripheral and data
+				 * array to turn on.
+				 */
+				val |= readl(qproc->reg_base + mem_pwr_ctl);
+				udelay(1);
+			}
 		} else {
-			/* MSS_MSM8998 */
-			mem_pwr_ctl = QDSP6V6SS_MEM_PWR_CTL;
-			i = 28;
-		}
-		val = readl(qproc->reg_base + mem_pwr_ctl);
-		for (; i >= 0; i--) {
-			val |= BIT(i);
-			writel(val, qproc->reg_base + mem_pwr_ctl);
-			/*
-			 * Read back value to ensure the write is done then
-			 * wait for 1us for both memory peripheral and data
-			 * array to turn on.
-			 */
-			val |= readl(qproc->reg_base + mem_pwr_ctl);
-			udelay(1);
+			/* Turn on memories */
+			val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+			val |= Q6SS_SLP_RET_N | Q6SS_L2DATA_STBY_N |
+			       Q6SS_ETB_SLP_NRET_N | QDSP6V55_MEM_BITS;
+			writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+			/* Turn on L2 banks 1 at a time */
+			for (i = 0; i <= 7; i++) {
+				val |= BIT(i);
+				writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+			}
 		}
+
 		/* Remove word line clamp */
 		val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 		val &= ~QDSP6v56_CLAMP_WL;
@@ -2240,6 +2262,40 @@  static const struct rproc_hexagon_res msm8996_mss = {
 	.version = MSS_MSM8996,
 };
 
+static const struct rproc_hexagon_res msm8909_mss = {
+	.hexagon_mba_image = "mba.mbn",
+	.proxy_supply = (struct qcom_mss_reg_res[]) {
+		{
+			.supply = "pll",
+			.uA = 100000,
+		},
+		{}
+	},
+	.proxy_clk_names = (char*[]){
+		"xo",
+		NULL
+	},
+	.active_clk_names = (char*[]){
+		"iface",
+		"bus",
+		"mem",
+		NULL
+	},
+	.proxy_pd_names = (char*[]){
+		"mx",
+		"cx",
+		NULL
+	},
+	.need_mem_protection = false,
+	.has_alt_reset = false,
+	.has_mba_logs = false,
+	.has_spare_reg = false,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
+	.version = MSS_MSM8909,
+};
+
 static const struct rproc_hexagon_res msm8916_mss = {
 	.hexagon_mba_image = "mba.mbn",
 	.proxy_supply = (struct qcom_mss_reg_res[]) {
@@ -2340,6 +2396,7 @@  static const struct rproc_hexagon_res msm8974_mss = {
 
 static const struct of_device_id q6v5_of_match[] = {
 	{ .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},
+	{ .compatible = "qcom,msm8909-mss-pil", .data = &msm8909_mss},
 	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
 	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
 	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},