diff mbox series

[v3,2/5] dt-bindings: remoteproc: qcom: adsp: document sm8550 adsp, cdsp & mpss compatible

Message ID 20221114-narmstrong-sm8550-upstream-remoteproc-v3-2-62162a1df718@linaro.org (mailing list archive)
State Superseded
Headers show
Series remoteproc: qcom_q6v5_pas: add support for SM8550 adsp, cdsp & mpss | expand

Commit Message

Neil Armstrong Dec. 7, 2022, 7:23 p.m. UTC
This documents the compatible for the component used to boot the
aDSP, cDSP and MPSS on the SM8550 SoC.

The SM8550 boot process on SM8550 now requires a secondary "Devicetree"
firmware to be passed along the main Firmware, and the cDSP a new power
domain named "NSP".

A third memory domain for the DSM memory zone is also needed for the MPSS
PAS bindings.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../bindings/remoteproc/qcom,sm8550-pas.yaml       | 178 +++++++++++++++++++++
 1 file changed, 178 insertions(+)

Comments

Krzysztof Kozlowski Dec. 8, 2022, 10:38 a.m. UTC | #1
On 07/12/2022 20:23, Neil Armstrong wrote:
> This documents the compatible for the component used to boot the
> aDSP, cDSP and MPSS on the SM8550 SoC.
> 
> The SM8550 boot process on SM8550 now requires a secondary "Devicetree"
> firmware to be passed along the main Firmware, and the cDSP a new power
> domain named "NSP".
> 
> A third memory domain for the DSM memory zone is also needed for the MPSS
> PAS bindings.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
new file mode 100644
index 000000000000..ae612809e260
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
@@ -0,0 +1,178 @@ 
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sm8550-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8550 SoC Peripheral Authentication Service loads and boots firmware
+  on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8550-adsp-pas
+      - qcom,sm8550-cdsp-pas
+      - qcom,sm8550-mpss-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  smd-edge: false
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Firmware name of the Hexagon core
+      - description: Firmware name of the Hexagon Devicetree
+
+  memory-region:
+    minItems: 2
+    items:
+      - description: Memory region for main Firmware authentication
+      - description: Memory region for Devicetree Firmware authentication
+      - description: DSM Memory region
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-adsp-pas
+            - qcom,sm8550-cdsp-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+        memory-region:
+          maxItems: 2
+    else:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+        memory-region:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-adsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-cdsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MXC power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mxc
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-mpss-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MXC power domain
+            - description: NSP power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mxc
+            - const: nsp
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc@30000000 {
+        compatible = "qcom,sm8550-adsp-pas";
+        reg = <0x030000000 0x100>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "xo";
+
+        interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack";
+
+        memory-region = <&adsp_mem>, <&dtb_adsp_mem>;
+
+        firmware-name = "qcom/sm8550/adsp.mbn",
+                        "qcom/sm8550/adsp_dtb.mbn";
+
+        power-domains = <&rpmhpd_sm8550_lcx>,
+                        <&rpmhpd_sm8550_lmx>;
+        power-domain-names = "lcx", "lmx";
+
+        qcom,qmp = <&aoss_qmp>;
+        qcom,smem-states = <&smp2p_adsp_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "lpass";
+            qcom,remote-pid = <2>;
+
+            /* ... */
+        };
+    };