| Message ID | 20230128054256.2100501-1-bhupesh.sharma@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | arm64: dts: qcom: sm6115: Add remoteproc nodes | expand |
Hi Bjorn, On 1/28/23 11:12 AM, Bhupesh Sharma wrote: > Add the adsp, cdsp and modem remoteproc nodes to sm6115. > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > - Depends on the dt-binding and driver change submitted via [1]. > [1]. https://lore.kernel.org/linux-arm-msm/20230128053504.2099620-1-bhupesh.sharma@linaro.org Gentle Ping. Since the dependencies (dt-bindings and driver changes) have already been merged into linux-next, this patch can now be applied. Thanks, Bhupesh > arch/arm64/boot/dts/qcom/sm6115.dtsi | 184 +++++++++++++++++++++++++++ > 1 file changed, 184 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi > index 3c66f998a81b..3540cd24af5c 100644 > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi > @@ -1309,6 +1309,39 @@ dispcc: clock-controller@5f00000 { > #power-domain-cells = <1>; > }; > > + remoteproc_mpss: remoteproc@6080000 { > + compatible = "qcom,sm6115-mpss-pas"; > + reg = <0x06080000 0x100>; > + > + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", "handover", > + "stop-ack", "shutdown-ack"; > + > + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; > + clock-names = "xo"; > + > + power-domains = <&rpmpd SM6115_VDDCX>; > + > + memory-region = <&pil_modem_mem>; > + > + qcom,smem-states = <&modem_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + status = "disabled"; > + > + glink-edge { > + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; > + label = "mpss"; > + qcom,remote-pid = <1>; > + mboxes = <&apcs_glb 12>; > + }; > + }; > + > stm@8002000 { > compatible = "arm,coresight-stm", "arm,primecell"; > reg = <0x08002000 0x1000>, > @@ -1921,6 +1954,157 @@ funnel_apss1_in: endpoint { > }; > }; > > + remoteproc_adsp: remoteproc@ab00000 { > + compatible = "qcom,sm6115-adsp-pas"; > + reg = <0x0ab00000 0x100>; > + > + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, > + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack"; > + > + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; > + clock-names = "xo"; > + > + power-domains = <&rpmpd SM6115_VDD_LPI_CX>, > + <&rpmpd SM6115_VDD_LPI_MX>; > + > + memory-region = <&pil_adsp_mem>; > + > + qcom,smem-states = <&adsp_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + status = "disabled"; > + > + glink-edge { > + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; > + label = "lpass"; > + qcom,remote-pid = <2>; > + mboxes = <&apcs_glb 8>; > + > + fastrpc { > + compatible = "qcom,fastrpc"; > + qcom,glink-channels = "fastrpcglink-apps-dsp"; > + label = "adsp"; > + qcom,non-secure-domain; > + #address-cells = <1>; > + #size-cells = <0>; > + > + compute-cb@3 { > + compatible = "qcom,fastrpc-compute-cb"; > + reg = <3>; > + iommus = <&apps_smmu 0x01c3 0x0>; > + }; > + > + compute-cb@4 { > + compatible = "qcom,fastrpc-compute-cb"; > + reg = <4>; > + iommus = <&apps_smmu 0x01c4 0x0>; > + }; > + > + compute-cb@5 { > + compatible = "qcom,fastrpc-compute-cb"; > + reg = <5>; > + iommus = <&apps_smmu 0x01c5 0x0>; > + }; > + > + compute-cb@6 { > + compatible = "qcom,fastrpc-compute-cb"; > + reg = <6>; > + iommus = <&apps_smmu 0x01c6 0x0>; > + }; > + > + compute-cb@7 { > + compatible = "qcom,fastrpc-compute-cb"; > + reg = <7>; > + iommus = <&apps_smmu 0x01c7 0x0>; > + }; > + }; > + }; > + }; > + > + remoteproc_cdsp: remoteproc@b300000 { > + compatible = "qcom,sm6115-cdsp-pas"; > + reg = <0x0b300000 0x100000>; > + > + interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack"; > + > + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; > + clock-names = "xo"; > + > + power-domains = <&rpmpd SM6115_VDDCX>; > + > + memory-region = <&pil_cdsp_mem>; > + > + qcom,smem-states = <&cdsp_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + status = "disabled"; > + > + glink-edge { > + interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>; > + label = "cdsp"; > + qcom,remote-pid = <5>; > + mboxes = <&apcs_glb 28>; > + > + fastrpc { > + compatible = "qcom,fastrpc"; > + qcom,glink-channels = "fastrpcglink-apps-dsp"; > + label = "cdsp"; > + qcom,non-secure-domain; > + #address-cells = <1>; > + #size-cells = <0>; > + > + compute-cb@1 { > + compatible = "qcom,fastrpc-compute-cb"; > + reg = <1>; > + iommus = <&apps_smmu 0x0c01 0x0>; > + }; > + > + compute-cb@2 { > + compatible = "qcom,fastrpc-compute-cb"; > + reg = <2>; > + iommus = <&apps_smmu 0x0c02 0x0>; > + }; > + > + compute-cb@3 { > + compatible = "qcom,fastrpc-compute-cb"; > + reg = <3>; > + iommus = <&apps_smmu 0x0c03 0x0>; > + }; > + > + compute-cb@4 { > + compatible = "qcom,fastrpc-compute-cb"; > + reg = <4>; > + iommus = <&apps_smmu 0x0c04 0x0>; > + }; > + > + compute-cb@5 { > + compatible = "qcom,fastrpc-compute-cb"; > + reg = <5>; > + iommus = <&apps_smmu 0x0c05 0x0>; > + }; > + > + compute-cb@6 { > + compatible = "qcom,fastrpc-compute-cb"; > + reg = <6>; > + iommus = <&apps_smmu 0x0c06 0x0>; > + }; > + > + /* note: secure cb9 in downstream */ > + }; > + }; > + }; > + > apps_smmu: iommu@c600000 { > compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500"; > reg = <0x0c600000 0x80000>;
On 13.03.2023 21:58, Bhupesh Sharma wrote: > Hi Bjorn, > > On 1/28/23 11:12 AM, Bhupesh Sharma wrote: >> Add the adsp, cdsp and modem remoteproc nodes to sm6115. >> >> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> >> --- >> - Depends on the dt-binding and driver change submitted via [1]. >> [1]. https://lore.kernel.org/linux-arm-msm/20230128053504.2099620-1-bhupesh.sharma@linaro.org > > Gentle Ping. Since the dependencies (dt-bindings and driver changes) have already been merged into linux-next, this patch can now be applied. Not really, it won't apply as-is. I suggest applying the version below which was rebased, the reg was adjusted for 64bit addressing and the -names were turned into vertical lists, I've been carrying it downstream for a while and can confirm it works - I even got Wi-Fi up on the Tab P11! https://github.com/SoMainline/linux/commit/a34e0bf410318b573820254bd241fef0ea013ea1.patch (this is a git am-able plaintext patchfile) Konrad
On 3/14/23 2:33 AM, Konrad Dybcio wrote: > > > On 13.03.2023 21:58, Bhupesh Sharma wrote: >> Hi Bjorn, >> >> On 1/28/23 11:12 AM, Bhupesh Sharma wrote: >>> Add the adsp, cdsp and modem remoteproc nodes to sm6115. >>> >>> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> >>> --- >>> - Depends on the dt-binding and driver change submitted via [1]. >>> [1]. https://lore.kernel.org/linux-arm-msm/20230128053504.2099620-1-bhupesh.sharma@linaro.org >> >> Gentle Ping. Since the dependencies (dt-bindings and driver changes) have already been merged into linux-next, this patch can now be applied. > Not really, it won't apply as-is. I suggest applying the version below > which was rebased, the reg was adjusted for 64bit addressing and the > -names were turned into vertical lists, I've been carrying it downstream > for a while and can confirm it works - I even got Wi-Fi up on the Tab P11! > > https://github.com/SoMainline/linux/commit/a34e0bf410318b573820254bd241fef0ea013ea1.patch > > (this is a git am-able plaintext patchfile) Please send out your version for review, without which remoteproc is currently not functional on SM6115 / SM4250 SoC based boards. Thanks, Bhupesh
On Sat, 28 Jan 2023 11:12:56 +0530, Bhupesh Sharma wrote: > Add the adsp, cdsp and modem remoteproc nodes to sm6115. > > Applied, thanks! [1/1] arm64: dts: qcom: sm6115: Add remoteproc nodes commit: 96ce9227fdbcfe32265ffb2803bfbbfa692cb445 Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 3c66f998a81b..3540cd24af5c 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -1309,6 +1309,39 @@ dispcc: clock-controller@5f00000 { #power-domain-cells = <1>; }; + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,sm6115-mpss-pas"; + reg = <0x06080000 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + stm@8002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x08002000 0x1000>, @@ -1921,6 +1954,157 @@ funnel_apss1_in: endpoint { }; }; + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,sm6115-adsp-pas"; + reg = <0x0ab00000 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDD_LPI_CX>, + <&rpmpd SM6115_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x01c3 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x01c4 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x01c5 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x01c6 0x0>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x01c7 0x0>; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@b300000 { + compatible = "qcom,sm6115-cdsp-pas"; + reg = <0x0b300000 0x100000>; + + interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDDCX>; + + memory-region = <&pil_cdsp_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apcs_glb 28>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0c01 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0c02 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0c03 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x0c04 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x0c05 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x0c06 0x0>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + apps_smmu: iommu@c600000 { compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0c600000 0x80000>;
Add the adsp, cdsp and modem remoteproc nodes to sm6115. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- - Depends on the dt-binding and driver change submitted via [1]. [1]. https://lore.kernel.org/linux-arm-msm/20230128053504.2099620-1-bhupesh.sharma@linaro.org arch/arm64/boot/dts/qcom/sm6115.dtsi | 184 +++++++++++++++++++++++++++ 1 file changed, 184 insertions(+)