diff mbox series

[2/5] ARM: dts: stm32: Remove the st,syscfg-tz property

Message ID 20230331154651.3107173-3-arnaud.pouliquen@foss.st.com (mailing list archive)
State Superseded
Headers show
Series stm32mp15: update remoteproc to support SCMI Device tree | expand

Commit Message

Arnaud POULIQUEN March 31, 2023, 3:46 p.m. UTC
Since the introduction of the SCMI server for the management
of the MCU hold boot in OPTEE, management of the hold boot by smc call
is deprecated.
Clean the st,syscfg-tz  which allows to determine if the trust
zone is enable.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 arch/arm/boot/dts/stm32mp151.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Arnaud POULIQUEN April 4, 2023, 3:33 p.m. UTC | #1
On 3/31/23 17:46, Arnaud Pouliquen wrote:
> Since the introduction of the SCMI server for the management
> of the MCU hold boot in OPTEE, management of the hold boot by smc call
> is deprecated.
> Clean the st,syscfg-tz  which allows to determine if the trust
> zone is enable.


Please don't waste time to review the commit message above!

The subject and the commit message is not aligned with the commit update

I need to rework it in a V2. I'm waiting few days before sending the V2,
allowing people to comment V1.

For V2 I will probably copy/past the commit message of:

[PATCH 1/5] dt-bindings: remoteproc: st,stm32-rproc: Rework reset declarations

Regards,
Arnaud

> 
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
> ---
>  arch/arm/boot/dts/stm32mp151.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index 4e437d3f2ed6..25626797db94 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1820,8 +1820,8 @@ m4_rproc: m4@10000000 {
>  			      <0x30000000 0x40000>,
>  			      <0x38000000 0x10000>;
>  			resets = <&rcc MCU_R>;
> +			reset-names = "mcu_rst";
>  			st,syscfg-holdboot = <&rcc 0x10C 0x1>;
> -			st,syscfg-tz = <&rcc 0x000 0x1>;
>  			st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
>  			st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
>  			st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 4e437d3f2ed6..25626797db94 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1820,8 +1820,8 @@  m4_rproc: m4@10000000 {
 			      <0x30000000 0x40000>,
 			      <0x38000000 0x10000>;
 			resets = <&rcc MCU_R>;
+			reset-names = "mcu_rst";
 			st,syscfg-holdboot = <&rcc 0x10C 0x1>;
-			st,syscfg-tz = <&rcc 0x000 0x1>;
 			st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
 			st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
 			st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;