| Message ID | 20230609120546.3937821-1-arnd@kernel.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | remoteproc: stm32: use correct format strings on 64-bit | expand |
Hi Arnd On 6/9/23 14:05, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > With CONFIG_ARCH_STM32 making it into arch/arm64, a couple of format > strings no longer work, since they rely on size_t being compatible > with %x, or they print an 'int' using %z: > > drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_mem_alloc': > drivers/remoteproc/stm32_rproc.c:122:22: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=] > drivers/remoteproc/stm32_rproc.c:122:40: note: format string is defined here > 122 | dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len); > | ~^ > | | > | unsigned int > | %lx > drivers/remoteproc/stm32_rproc.c:125:30: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=] > drivers/remoteproc/stm32_rproc.c:125:65: note: format string is defined here > 125 | dev_err(dev, "Unable to map memory region: %pa+%x\n", > | ~^ > | | > | unsigned int > | %lx > drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_get_loaded_rsc_table': > drivers/remoteproc/stm32_rproc.c:646:30: error: format '%zx' expects argument of type 'size_t', but argument 4 has type 'int' [-Werror=format=] > drivers/remoteproc/stm32_rproc.c:646:66: note: format string is defined here > 646 | dev_err(dev, "Unable to map memory region: %pa+%zx\n", > | ~~^ > | | > | long unsigned int > | %x > > Fix up all three instances to work across architectures, and enable > compile testing for this driver to ensure it builds everywhere. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> I also have it for the stm32mp2 :) Please find a remark below , with or without that Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > --- > drivers/remoteproc/Kconfig | 2 +- > drivers/remoteproc/stm32_rproc.c | 6 +++--- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig > index a850e9f486dd6..48845dc8fa852 100644 > --- a/drivers/remoteproc/Kconfig > +++ b/drivers/remoteproc/Kconfig > @@ -313,7 +313,7 @@ config ST_SLIM_REMOTEPROC > > config STM32_RPROC > tristate "STM32 remoteproc support" > - depends on ARCH_STM32 > + depends on ARCH_STM32 || COMPILE_TEST > depends on REMOTEPROC > select MAILBOX > help > diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c > index a7457777aae43..cf073bac79f73 100644 > --- a/drivers/remoteproc/stm32_rproc.c > +++ b/drivers/remoteproc/stm32_rproc.c > @@ -119,10 +119,10 @@ static int stm32_rproc_mem_alloc(struct rproc *rproc, > struct device *dev = rproc->dev.parent; > void *va; > > - dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len); > + dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len); > va = ioremap_wc(mem->dma, mem->len); > if (IS_ERR_OR_NULL(va)) { > - dev_err(dev, "Unable to map memory region: %pa+%x\n", > + dev_err(dev, "Unable to map memory region: %pad+0x%zx\n", > &mem->dma, mem->len); > return -ENOMEM; > } > @@ -643,7 +643,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz) > > ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE); > if (IS_ERR_OR_NULL(ddata->rsc_va)) { > - dev_err(dev, "Unable to map memory region: %pa+%zx\n", > + dev_err(dev, "Unable to map memory region: %pa+%x\n", > &rsc_pa, RSC_TBL_SIZE); What about cast the RSC_TBL_SIZE define instead to ensure to be independent from the arch and to match with the use of RSC_TBL_SIZE? #define RSC_TBL_SIZE ((size_t)1024) Thanks, Arnaud > ddata->rsc_va = NULL; > return ERR_PTR(-ENOMEM);
On Mon, Jun 12, 2023, at 16:10, Arnaud POULIQUEN wrote: >> ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE); >> if (IS_ERR_OR_NULL(ddata->rsc_va)) { >> - dev_err(dev, "Unable to map memory region: %pa+%zx\n", >> + dev_err(dev, "Unable to map memory region: %pa+%x\n", >> &rsc_pa, RSC_TBL_SIZE); > > What about cast the RSC_TBL_SIZE define instead to ensure to be independent from > the arch and to match with the use of RSC_TBL_SIZE? > > #define RSC_TBL_SIZE ((size_t)1024) I have no objection to that, but I don't see it doing anything good either, as this is a constant value that will always work. Arnd
On 6/12/23 16:17, Arnd Bergmann wrote: > On Mon, Jun 12, 2023, at 16:10, Arnaud POULIQUEN wrote: > >>> ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE); >>> if (IS_ERR_OR_NULL(ddata->rsc_va)) { >>> - dev_err(dev, "Unable to map memory region: %pa+%zx\n", >>> + dev_err(dev, "Unable to map memory region: %pa+%x\n", >>> &rsc_pa, RSC_TBL_SIZE); >> >> What about cast the RSC_TBL_SIZE define instead to ensure to be independent from >> the arch and to match with the use of RSC_TBL_SIZE? >> >> #define RSC_TBL_SIZE ((size_t)1024) > > I have no objection to that, but I don't see it doing anything good either, > as this is a constant value that will always work. > > Arnd It was just to avoid to have the constant used with different types in the code But that's nitpicking, let's keep your proposal. Thanks, Arnaud
Hi Arnd On 6/12/23 16:17, Arnd Bergmann wrote: > On Mon, Jun 12, 2023, at 16:10, Arnaud POULIQUEN wrote: > >>> ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE); >>> if (IS_ERR_OR_NULL(ddata->rsc_va)) { >>> - dev_err(dev, "Unable to map memory region: %pa+%zx\n", >>> + dev_err(dev, "Unable to map memory region: %pa+%x\n", >>> &rsc_pa, RSC_TBL_SIZE); >> >> What about cast the RSC_TBL_SIZE define instead to ensure to be independent from >> the arch and to match with the use of RSC_TBL_SIZE? >> >> #define RSC_TBL_SIZE ((size_t)1024) > > I have no objection to that, but I don't see it doing anything good either, > as this is a constant value that will always work. > > Arnd The kernel robot shot me for my STM32MP25 PR due to this issue. Do I have to resend something ? Thanks Alex
On 6/9/23 05:05, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > With CONFIG_ARCH_STM32 making it into arch/arm64, a couple of format > strings no longer work, since they rely on size_t being compatible > with %x, or they print an 'int' using %z: > > drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_mem_alloc': > drivers/remoteproc/stm32_rproc.c:122:22: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=] > drivers/remoteproc/stm32_rproc.c:122:40: note: format string is defined here > 122 | dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len); > | ~^ > | | > | unsigned int > | %lx > drivers/remoteproc/stm32_rproc.c:125:30: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=] > drivers/remoteproc/stm32_rproc.c:125:65: note: format string is defined here > 125 | dev_err(dev, "Unable to map memory region: %pa+%x\n", > | ~^ > | | > | unsigned int > | %lx > drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_get_loaded_rsc_table': > drivers/remoteproc/stm32_rproc.c:646:30: error: format '%zx' expects argument of type 'size_t', but argument 4 has type 'int' [-Werror=format=] > drivers/remoteproc/stm32_rproc.c:646:66: note: format string is defined here > 646 | dev_err(dev, "Unable to map memory region: %pa+%zx\n", > | ~~^ > | | > | long unsigned int > | %x > > Fix up all three instances to work across architectures, and enable > compile testing for this driver to ensure it builds everywhere. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Thanks. > --- > drivers/remoteproc/Kconfig | 2 +- > drivers/remoteproc/stm32_rproc.c | 6 +++--- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig > index a850e9f486dd6..48845dc8fa852 100644 > --- a/drivers/remoteproc/Kconfig > +++ b/drivers/remoteproc/Kconfig > @@ -313,7 +313,7 @@ config ST_SLIM_REMOTEPROC > > config STM32_RPROC > tristate "STM32 remoteproc support" > - depends on ARCH_STM32 > + depends on ARCH_STM32 || COMPILE_TEST > depends on REMOTEPROC > select MAILBOX > help > diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c > index a7457777aae43..cf073bac79f73 100644 > --- a/drivers/remoteproc/stm32_rproc.c > +++ b/drivers/remoteproc/stm32_rproc.c > @@ -119,10 +119,10 @@ static int stm32_rproc_mem_alloc(struct rproc *rproc, > struct device *dev = rproc->dev.parent; > void *va; > > - dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len); > + dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len); > va = ioremap_wc(mem->dma, mem->len); > if (IS_ERR_OR_NULL(va)) { > - dev_err(dev, "Unable to map memory region: %pa+%x\n", > + dev_err(dev, "Unable to map memory region: %pad+0x%zx\n", > &mem->dma, mem->len); > return -ENOMEM; > } > @@ -643,7 +643,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz) > > ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE); > if (IS_ERR_OR_NULL(ddata->rsc_va)) { > - dev_err(dev, "Unable to map memory region: %pa+%zx\n", > + dev_err(dev, "Unable to map memory region: %pa+%x\n", > &rsc_pa, RSC_TBL_SIZE); > ddata->rsc_va = NULL; > return ERR_PTR(-ENOMEM);
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index a850e9f486dd6..48845dc8fa852 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -313,7 +313,7 @@ config ST_SLIM_REMOTEPROC config STM32_RPROC tristate "STM32 remoteproc support" - depends on ARCH_STM32 + depends on ARCH_STM32 || COMPILE_TEST depends on REMOTEPROC select MAILBOX help diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c index a7457777aae43..cf073bac79f73 100644 --- a/drivers/remoteproc/stm32_rproc.c +++ b/drivers/remoteproc/stm32_rproc.c @@ -119,10 +119,10 @@ static int stm32_rproc_mem_alloc(struct rproc *rproc, struct device *dev = rproc->dev.parent; void *va; - dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len); + dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len); va = ioremap_wc(mem->dma, mem->len); if (IS_ERR_OR_NULL(va)) { - dev_err(dev, "Unable to map memory region: %pa+%x\n", + dev_err(dev, "Unable to map memory region: %pad+0x%zx\n", &mem->dma, mem->len); return -ENOMEM; } @@ -643,7 +643,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz) ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE); if (IS_ERR_OR_NULL(ddata->rsc_va)) { - dev_err(dev, "Unable to map memory region: %pa+%zx\n", + dev_err(dev, "Unable to map memory region: %pa+%x\n", &rsc_pa, RSC_TBL_SIZE); ddata->rsc_va = NULL; return ERR_PTR(-ENOMEM);