| Message ID | 20240620120143.12375-2-quic_kbajaj@quicinc.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | remoteproc: qcom_q6v5_pas: Add support for QDU1000/QRU1000 mpss | expand |
On 20/06/2024 14:01, Komal Bajaj wrote: > From: Melody Olvera <quic_molvera@quicinc.com> > > Document the compatible for the component used to boot the MPSS on the > QDU1000 and QRU1000 SoCs. > > The QDU1000 and QRU1000 mpss boot process now requires the specification > of an RMB register space to complete the handshake needed to start or What is RMB? > attach the mpss. mpss? MPSS? > > Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> > Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> > --- > .../remoteproc/qcom,qdu1000-mpss-pas.yaml | 129 ++++++++++++++++++ > 1 file changed, 129 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml > > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml > new file mode 100644 > index 000000000000..71c5a85b679e > --- /dev/null > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml > @@ -0,0 +1,129 @@ > +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/remoteproc/qcom,qdu1000-mpss-pas.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm QDU1000 Modem Peripheral Authentication Service > + > +maintainers: > + - Melody Olvera <quic_molvera@quicinc.com> > + - Komal Bajaj <quic_kbajaj@quicinc.com> > + > +description: > + Qualcomm QDU1000 SoC Peripheral Authentication Service loads and boots firmware > + on the Qualcomm DSP Hexagon core. > + > +properties: > + compatible: > + enum: > + - qcom,qdu1000-mpss-pas > + > + reg: > + items: > + - description: Address offset and size for MPSS PAS register set > + - description: Address offset and size for MPSS RMB register set 10 words, 8 are entirely redundant. This cannot be anything else than address offset and size of some register set. Please write efficient and understandable code. E.g. "MPSS main Peripheral Authentication Service" "MPSS something-explain-what-is-rmb" ... > + glink-edge { > + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS > + IPCC_MPROC_SIGNAL_GLINK_QMP > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_GLINK_QMP>; > + > + label = "modem"; > + qcom,remote-pid = <2>; > + }; This wasn't tested. Best regards, Krzysztof
On Thu, 20 Jun 2024 17:31:40 +0530, Komal Bajaj wrote: > From: Melody Olvera <quic_molvera@quicinc.com> > > Document the compatible for the component used to boot the MPSS on the > QDU1000 and QRU1000 SoCs. > > The QDU1000 and QRU1000 mpss boot process now requires the specification > of an RMB register space to complete the handshake needed to start or > attach the mpss. > > Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> > Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> > --- > .../remoteproc/qcom,qdu1000-mpss-pas.yaml | 129 ++++++++++++++++++ > 1 file changed, 129 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.example.dts:70.3-71.1 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:427: Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.example.dtb] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2 make: *** [Makefile:240: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240620120143.12375-2-quic_kbajaj@quicinc.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml new file mode 100644 index 000000000000..71c5a85b679e --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,qdu1000-mpss-pas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QDU1000 Modem Peripheral Authentication Service + +maintainers: + - Melody Olvera <quic_molvera@quicinc.com> + - Komal Bajaj <quic_kbajaj@quicinc.com> + +description: + Qualcomm QDU1000 SoC Peripheral Authentication Service loads and boots firmware + on the Qualcomm DSP Hexagon core. + +properties: + compatible: + enum: + - qcom,qdu1000-mpss-pas + + reg: + items: + - description: Address offset and size for MPSS PAS register set + - description: Address offset and size for MPSS RMB register set + + reg-names: + items: + - const: base + - const: rmb + + clocks: + items: + - description: XO clock + + clock-names: + items: + - const: xo + + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the AOSS side-channel message RAM. + + smd-edge: false + + firmware-name: + items: + - description: Firmware name of the Hexagon core + - description: Firmware name of the Hexagon Devicetree + + memory-region: + items: + - description: Memory region for main Firmware authentication + - description: Memory region for Devicetree Firmware authentication + - description: DSM Memory region + + power-domains: + items: + - description: CX power domain + - description: MSS power domain + + power-domain-names: + items: + - const: cx + - const: mss + +required: + - compatible + - reg + - reg-names + - memory-region + +allOf: + - $ref: /schemas/remoteproc/qcom,pas-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + remoteproc@4080000 { + compatible = "qcom,qdu1000-mpss-pas"; + reg = <0x4080000 0x4040>, + <0x4180000 0x1000>; + reg-names = "base", "rmb"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + memory-region = <&mpss_mem>, <&dtb_mpss_mem>, <&mpss_dsm_mem>; + + firmware-name = "qcom/qdu1000/modem.mbn", + "qcom/qdu1000/modem_dtb.mbn"; + + power-domains = <&rpmhpd QDU1000_CX>, + <&rpmhpd QDU1000_MSS>; + power-domain-names = "cx", "mss"; + + interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "modem"; + qcom,remote-pid = <2>; + };