[v7,0/7] media: i2c: Add RDACM21 camera module

Message

Jacopo Mondi Jan. 13, 2021, 6:54 p.m. UTC

This iteration is only to ease review of the RDACM21 as it contains two
broken out patches marked as fixups

I've taken Laurent's comments on v6 in the driver, but once I've rebased on
the GPIO handling fixes applied to the MAX9271 driver, I've opened the pandora
can of properly resetting the OV490 ISP @_@

The two broken out patches serve to show the difference on top of the v6
version instead of having reviewers going through the changes  that might get
lost between the two versions.

With acks on the fixups patches, I'll squash in v8.

All the other patches are reviewed already, so I hope if nothing big is in
this version, v8 will be good for merging.

Thanks
  j

Jacopo Mondi (7):
  media: i2c: Add driver for RDACM21 camera module
  fixup! media: i2c: rdacm21: Fix GPIO handling
  fixup! media: i2c: rdacm21: Break-out ov10640 initialization
  dt-bindings: media: max9286: Document
    'maxim,reverse-channel-microvolt'
  media: i2c: max9286: Break-out reverse channel setup
  media: i2c: max9286: Make channel amplitude programmable
  media: i2c: max9286: Configure reverse channel amplitude

 .../bindings/media/i2c/maxim,max9286.yaml     |  22 +
 MAINTAINERS                                   |  12 +
 drivers/media/i2c/Kconfig                     |  13 +
 drivers/media/i2c/Makefile                    |   2 +
 drivers/media/i2c/max9286.c                   |  60 +-
 drivers/media/i2c/rdacm21.c                   | 623 ++++++++++++++++++
 6 files changed, 719 insertions(+), 13 deletions(-)
 create mode 100644 drivers/media/i2c/rdacm21.c

--
2.29.2