mbox series

[0/2] Fix for GPIO interrupts

Message ID 20230918123355.262115-1-biju.das.jz@bp.renesas.com (mailing list archive)
Headers show
Series Fix for GPIO interrupts | expand

Message

Biju Das Sept. 18, 2023, 12:33 p.m. UTC 
The following issues observed while adding IRQ support for RTC.
 * The driver is not following reverse order of enable() for disable().
 * The driver is not following as per hardware manual for setting
   GPIO interrupts. As per HW manual we need to set noise filter
   for GPIO interrupts.

This patch series fixes those issues.

Biju Das (2):
  pinctrl: renesas: rzg2l: Make reverse order of enable() for disable()
  pinctrl: renesas: rzg2l: Enable noise filter for GPIO interrupt input

 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)