| Message ID | 20241025114914.714597-1-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | pinctrl: rzg2l: Fix releasing of IRQ and status reported in pinmux-pins | expand |
Hi, Prabhakar, On 25.10.2024 14:49, Prabhakar wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Hi All, > > This patch series aims to fix the reporting of pin status in the > `pinmux-pins` file and properly free up the IRQ line when using a GPIO > pin as an interrupt via the `interrupts`/`interrupts-extended` property. With this series, the Ethernet PHYs IRQs switch to poll mode after a suspend to RAM cycle. I've added the logs here: https://p.fr33tux.org/3e8193 Thank you, Claudiu Beznea
Hi Claudiu, On Tue, Oct 29, 2024 at 12:37 PM Claudiu Beznea <claudiu.beznea@tuxon.dev> wrote: > > Hi, Prabhakar, > > On 25.10.2024 14:49, Prabhakar wrote: > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > > Hi All, > > > > This patch series aims to fix the reporting of pin status in the > > `pinmux-pins` file and properly free up the IRQ line when using a GPIO > > pin as an interrupt via the `interrupts`/`interrupts-extended` property. > > With this series, the Ethernet PHYs IRQs switch to poll mode after a > suspend to RAM cycle. I've added the logs here: > https://p.fr33tux.org/3e8193 > Thank you for testing it on RZ/G3S, I'll investigate it further. Cheers, Prabhakar
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Hi All, This patch series aims to fix the reporting of pin status in the `pinmux-pins` file and properly free up the IRQ line when using a GPIO pin as an interrupt via the `interrupts`/`interrupts-extended` property. Testing on SMARC RZ/G2L: ------------------------ keys { compatible = "gpio-keys"; key-1 { interrupt-parent = <&pinctrl>; gpios = <&pinctrl RZG2L_GPIO(41, 0) GPIO_ACTIVE_HIGH>; linux,code = <KEY_1>; label = "USER_SW1"; wakeup-source; debounce-interval = <20>; }; key-3 { interrupts-extended = <&pinctrl RZG2L_GPIO(43, 1) IRQ_TYPE_EDGE_RISING>; linux,code = <KEY_3>; label = "USER_SW3"; wakeup-source; debounce-interval = <20>; }; }; Before this patch series, the pin status was incorrectly reported in the `pinmux-pins` file, and the IRQ was not released. As seen below, `P43_1` is reported as `UNCLAIMED`, and after unloading the `gpio_keys` module, the IRQ is not released, unlike `P41_0`, which was used via the `gpios` property. --------------------------------------------------------------------------------- root@smarc-rzg2l:~# cat /proc/interrupts | grep pinctrl 78: 1 0 11030000.pinctrl 17 Edge 1-003d 91: 0 0 11030000.pinctrl 345 Edge USER_SW3 92: 0 0 11030000.pinctrl 328 Edge USER_SW1 root@smarc-rzg2l:~# cat /sys/kernel/debug/gpio | grep 41_0 gpio-840 (P41_0 |USER_SW1 ) in lo IRQ root@smarc-rzg2l:~# cat /sys/kernel/debug/gpio | grep 43_1 gpio-857 (P43_1 |interrupt ) in lo IRQ root@smarc-rzg2l:~# cat /sys/kernel/debug/pinctrl/11030000.pinctrl-pinctrl-rzg2l/pinmux-pins | grep 43_1 pin 345 (P43_1): UNCLAIMED root@smarc-rzg2l:~# cat /sys/kernel/debug/pinctrl/11030000.pinctrl-pinctrl-rzg2l/pinmux-pins | grep 41_0 pin 328 (P41_0): GPIO 11030000.pinctrl:840 root@smarc-rzg2l:~# root@smarc-rzg2l:~# ls /sys/kernel/debug/irq/irqs/91 /sys/kernel/debug/irq/irqs/91 root@smarc-rzg2l:~# ls /sys/kernel/debug/irq/irqs/92 /sys/kernel/debug/irq/irqs/92 root@smarc-rzg2l:~# root@smarc-rzg2l:~# lsmod Module Size Used by gpio_keys 20480 0 root@smarc-rzg2l:~# root@smarc-rzg2l:~# modprobe -r gpio_keys root@smarc-rzg2l:~# root@smarc-rzg2l:~# cat /proc/interrupts | grep pinctrl 78: 1 0 11030000.pinctrl 17 Edge 1-003d root@smarc-rzg2l:~# cat /sys/kernel/debug/gpio | grep 41_0 gpio-840 (P41_0 ) root@smarc-rzg2l:~# cat /sys/kernel/debug/gpio | grep 43_1 gpio-857 (P43_1 ) root@smarc-rzg2l:~# root@smarc-rzg2l:~# cat /sys/kernel/debug/pinctrl/11030000.pinctrl-pinctrl-rzg2l/pinmux-pins | grep 41_0 pin 328 (P41_0): UNCLAIMED root@smarc-rzg2l:~# cat /sys/kernel/debug/pinctrl/11030000.pinctrl-pinctrl-rzg2l/pinmux-pins | grep 43_1 pin 345 (P43_1): UNCLAIMED root@smarc-rzg2l:~# root@smarc-rzg2l:~# ls /sys/kernel/debug/irq/irqs/91 /sys/kernel/debug/irq/irqs/91 root@smarc-rzg2l:~# ls /sys/kernel/debug/irq/irqs/92 ls: /sys/kernel/debug/irq/irqs/92: No such file or directory root@smarc-rzg2l:~# root@smarc-rzg2l:~# After applying this patch series, the pin status is correctly reported in the `pinmux-pins` file, and the IRQ is properly released. As shown below, the status for pin `P43_1` is now reported correctly, and the IRQ is now released, unlike in the previous logs above. --------------------------------------------------------------------------- root@smarc-rzg2l:~# cat /proc/interrupts | grep pinctrl 78: 1 0 11030000.pinctrl 17 Edge 1-003d 91: 0 0 11030000.pinctrl 345 Edge USER_SW3 92: 0 0 11030000.pinctrl 328 Edge USER_SW1 root@smarc-rzg2l:~# cat /sys/kernel/debug/gpio | grep 41_0 gpio-840 (P41_0 |USER_SW1 ) in lo IRQ root@smarc-rzg2l:~# cat /sys/kernel/debug/gpio | grep 43_1 gpio-857 (P43_1 |interrupt ) in lo IRQ root@smarc-rzg2l:~# cat /sys/kernel/debug/pinctrl/11030000.pinctrl-pinctrl-rzg2l/pinmux-pins | grep P43_1 pin 345 (P43_1): GPIO 11030000.pinctrl:857 root@smarc-rzg2l:~# cat /sys/kernel/debug/pinctrl/11030000.pinctrl-pinctrl-rzg2l/pinmux-pins | grep P41_0 pin 328 (P41_0): GPIO 11030000.pinctrl:840 root@smarc-rzg2l:~# root@smarc-rzg2l:~# ls /sys/kernel/debug/irq/irqs/91 /sys/kernel/debug/irq/irqs/91 root@smarc-rzg2l:~# ls /sys/kernel/debug/irq/irqs/92 /sys/kernel/debug/irq/irqs/92 root@smarc-rzg2l:~# lsmod Module Size Used by gpio_keys 20480 0 root@smarc-rzg2l:~# modprobe -r gpio_keys root@smarc-rzg2l:~# cat /proc/interrupts | grep pinctrl 78: 1 0 11030000.pinctrl 17 Edge 1-003d root@smarc-rzg2l:~# root@smarc-rzg2l:~# cat /sys/kernel/debug/gpio | grep P43_1 gpio-857 (P43_1 ) root@smarc-rzg2l:~# cat /sys/kernel/debug/gpio | grep P41_0 gpio-840 (P41_0 ) root@smarc-rzg2l:~# cat /sys/kernel/debug/pinctrl/11030000.pinctrl-pinctrl-rzg2l/pinmux-pins | grep P43_1 pin 345 (P43_1): UNCLAIMED root@smarc-rzg2l:~# cat /sys/kernel/debug/pinctrl/11030000.pinctrl-pinctrl-rzg2l/pinmux-pins | grep P41_0 pin 328 (P41_0): UNCLAIMED root@smarc-rzg2l:~# ls /sys/kernel/debug/irq/irqs/91 ls: /sys/kernel/debug/irq/irqs/91: No such file or directory root@smarc-rzg2l:~# ls /sys/kernel/debug/irq/irqs/92 ls: /sys/kernel/debug/irq/irqs/92: No such file or directory root@smarc-rzg2l:~# Note: - On RZ/G3S SMARC, prior to this patch series, we hogged the GPIO pins as inputs before using them as GPIO interrupts via the `interrupts`/`interrupts-extended` property. These patches do not break older DTBs, i.e., functionality remains the same. However, after unloading the `gpio_keys` module, the `pinmux-pins` file in sysfs reports the pin as UNCLAIMED. v1->v2 - Fixed build warning - Collected RB tag from Linus fr patch 5/6 - Dropped patch 2/7 from v1 series v1: https://lore.kernel.org/all/20241017113942.139712-1-prabhakar.mahadev-lad.rj@bp.renesas.com/ Cheers, Prabhakar Lad Prabhakar (6): arm64: dts: renesas: rzg3s-smarc: Drop hogging of GPIO pins pinctrl: renesas: rzg2l: Release all the virq's in free callback pinctrl: renesas: rzg2l: Reorder function call in rzg2l_gpio_free() pinctrl: renesas: rzg2l: Drop calling rzg2l_gpio_request() pinctrl: pinmux: Introduce API to check if a pin is requested pinctrl: renesas: pinctrl-rzg2l: Override irq_request/release_resources .../boot/dts/renesas/rzg3s-smarc-som.dtsi | 18 --- arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi | 21 ---- drivers/pinctrl/pinmux.c | 14 +++ drivers/pinctrl/pinmux.h | 6 + drivers/pinctrl/renesas/pinctrl-rzg2l.c | 111 ++++++++++-------- 5 files changed, 79 insertions(+), 91 deletions(-)