@@ -1,8 +1,15 @@
* Renesas RCar PCIe interface
Required properties:
-- compatible: should contain one of the following
- "renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791"
+compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
+ "renesas,pcie-r8a7790" for the R8A7790 SoC;
+ "renesas,pcie-r8a7791" for the R8A7791 SoC;
+ "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
- reg: base address and length of the pcie controller registers.
- #address-cells: set to <3>
- #size-cells: set to <2>
@@ -25,7 +32,7 @@ Example:
SoC specific DT Entry:
pcie: pcie@fe000000 {
- compatible = "renesas,pcie-r8a7791";
+ compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
reg = <0 0xfe000000 0 0x80000>;
#address-cells = <3>;
#size-cells = <2>;
@@ -919,6 +919,7 @@ static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie *pcie,
static const struct of_device_id rcar_pcie_of_match[] = {
{ .compatible = "renesas,pcie-r8a7779", .data = rcar_pcie_hw_init_h1 },
+ { .compatible = "renesas,pcie-rcar-gen2", .data = rcar_pcie_hw_init },
{ .compatible = "renesas,pcie-r8a7790", .data = rcar_pcie_hw_init },
{ .compatible = "renesas,pcie-r8a7791", .data = rcar_pcie_hw_init },
{},