@@ -26,11 +26,6 @@
* Device Access
*/
-static inline u32 vsp1_sru_read(struct vsp1_sru *sru, u32 reg)
-{
- return vsp1_read(sru->entity.vsp1, reg);
-}
-
static inline void vsp1_sru_write(struct vsp1_sru *sru, u32 reg, u32 data)
{
vsp1_write(sru->entity.vsp1, reg, data);
@@ -82,20 +77,10 @@ static int sru_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct vsp1_sru *sru =
container_of(ctrl->handler, struct vsp1_sru, ctrls);
- const struct vsp1_sru_param *param;
- u32 value;
switch (ctrl->id) {
case V4L2_CID_VSP1_SRU_INTENSITY:
- param = &vsp1_sru_params[ctrl->val - 1];
-
- value = vsp1_sru_read(sru, VI6_SRU_CTRL0);
- value &= ~(VI6_SRU_CTRL0_PARAM0_MASK |
- VI6_SRU_CTRL0_PARAM1_MASK);
- value |= param->ctrl0;
- vsp1_sru_write(sru, VI6_SRU_CTRL0, value);
-
- vsp1_sru_write(sru, VI6_SRU_CTRL2, param->ctrl2);
+ sru->intensity = ctrl->val;
break;
}
@@ -123,6 +108,7 @@ static const struct v4l2_ctrl_config sru_intensity_control = {
static int sru_s_stream(struct v4l2_subdev *subdev, int enable)
{
+ const struct vsp1_sru_param *param;
struct vsp1_sru *sru = to_sru(subdev);
struct v4l2_mbus_framefmt *input;
struct v4l2_mbus_framefmt *output;
@@ -148,18 +134,13 @@ static int sru_s_stream(struct v4l2_subdev *subdev, int enable)
if (input->width != output->width)
ctrl0 |= VI6_SRU_CTRL0_MODE_UPSCALE;
- /* Take the control handler lock to ensure that the CTRL0 value won't be
- * changed behind our back by a set control operation.
- */
- if (sru->entity.vsp1->info->uapi)
- mutex_lock(sru->ctrls.lock);
- ctrl0 |= vsp1_sru_read(sru, VI6_SRU_CTRL0)
- & (VI6_SRU_CTRL0_PARAM0_MASK | VI6_SRU_CTRL0_PARAM1_MASK);
- vsp1_sru_write(sru, VI6_SRU_CTRL0, ctrl0);
- if (sru->entity.vsp1->info->uapi)
- mutex_unlock(sru->ctrls.lock);
+ param = &vsp1_sru_params[sru->intensity - 1];
+
+ ctrl0 |= param->ctrl0;
+ vsp1_sru_write(sru, VI6_SRU_CTRL0, ctrl0);
vsp1_sru_write(sru, VI6_SRU_CTRL1, VI6_SRU_CTRL1_PARAM5);
+ vsp1_sru_write(sru, VI6_SRU_CTRL2, param->ctrl2);
return 0;
}
@@ -376,6 +357,8 @@ struct vsp1_sru *vsp1_sru_create(struct vsp1_device *vsp1)
v4l2_ctrl_handler_init(&sru->ctrls, 1);
v4l2_ctrl_new_custom(&sru->ctrls, &sru_intensity_control, NULL);
+ sru->intensity = 1;
+
sru->entity.subdev.ctrl_handler = &sru->ctrls;
if (sru->ctrls.error) {
@@ -28,6 +28,8 @@ struct vsp1_sru {
struct vsp1_entity entity;
struct v4l2_ctrl_handler ctrls;
+
+ unsigned int intensity;
};
static inline struct vsp1_sru *to_sru(struct v4l2_subdev *subdev)
The datasheet clearly states that all but a few registers can't be modified when the device is running. Programming the intensity parameters in the control set handler is thus prohibited. Program it when starting the module instead. This requires storing the intensity value internally as the module can be started from the frame completion interrupt handler, and accessing control values requires taking a mutex. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- drivers/media/platform/vsp1/vsp1_sru.c | 35 +++++++++------------------------- drivers/media/platform/vsp1/vsp1_sru.h | 2 ++ 2 files changed, 11 insertions(+), 26 deletions(-)