diff mbox

[v4,4/7] ARM: dts: r8a7791: Add BRG support for (H)SCIF

Message ID 1454061883-4043-5-git-send-email-geert+renesas@glider.be (mailing list archive)
State Accepted
Commit 394730a1337c578da7a5dc26671187c10ce3a9cd
Delegated to: Simon Horman
Headers show

Commit Message

Geert Uytterhoeven Jan. 29, 2016, 10:04 a.m. UTC 
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.

Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.

This increases the range and accuracy of supported baud rates on
(H)SCIF.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v4:
  - Change one-line summary prefix to match current arm-soc practices,

v3:
  - Rename "int_clk" to "brg_int".
---
 arch/arm/boot/dts/r8a7791.dtsi | 54 ++++++++++++++++++++++++++++--------------
 1 file changed, 36 insertions(+), 18 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 194e9464b7487af0..14aa62539ff29769 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -685,8 +685,9 @@ 
 			     "renesas,scif";
 		reg = <0 0xe6e60000 0 64>;
 		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
-		clock-names = "fck";
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -698,8 +699,9 @@ 
 			     "renesas,scif";
 		reg = <0 0xe6e68000 0 64>;
 		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
-		clock-names = "fck";
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -711,8 +713,9 @@ 
 			     "renesas,scif";
 		reg = <0 0xe6e58000 0 64>;
 		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
-		clock-names = "fck";
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -724,8 +727,9 @@ 
 			     "renesas,scif";
 		reg = <0 0xe6ea8000 0 64>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
-		clock-names = "fck";
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -737,8 +741,9 @@ 
 			     "renesas,scif";
 		reg = <0 0xe6ee0000 0 64>;
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
-		clock-names = "fck";
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -750,8 +755,9 @@ 
 			     "renesas,scif";
 		reg = <0 0xe6ee8000 0 64>;
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
-		clock-names = "fck";
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -763,8 +769,9 @@ 
 			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c0000 0 96>;
 		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
-		clock-names = "fck";
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -776,8 +783,9 @@ 
 			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c8000 0 96>;
 		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
-		clock-names = "fck";
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -789,8 +797,9 @@ 
 			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62d0000 0 96>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
-		clock-names = "fck";
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -1049,6 +1058,15 @@ 
 			status = "disabled";
 		};
 
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			status = "disabled";
+		};
+
 		/* External USB clock - can be overridden by the board */
 		usb_extal_clk: usb_extal_clk {
 			compatible = "fixed-clock";