@@ -1008,7 +1008,8 @@ static int ravb_phy_init(struct net_device *ndev)
of_node_put(pn);
if (!phydev) {
netdev_err(ndev, "failed to connect PHY\n");
- return -ENOENT;
+ err = -ENOENT;
+ goto err_deregister_fixed_link;
}
/* This driver only support 10/100Mbit speeds on Gen3
@@ -1020,8 +1021,7 @@ static int ravb_phy_init(struct net_device *ndev)
err = phy_set_max_speed(phydev, SPEED_100);
if (err) {
netdev_err(ndev, "failed to limit PHY to 100Mbit/s\n");
- phy_disconnect(phydev);
- return err;
+ goto err_phy_disconnect;
}
netdev_info(ndev, "limited PHY to 100Mbit/s\n");
@@ -1033,6 +1033,14 @@ static int ravb_phy_init(struct net_device *ndev)
phy_attached_info(phydev);
return 0;
+
+err_phy_disconnect:
+ phy_disconnect(phydev);
+err_deregister_fixed_link:
+ if (of_phy_is_fixed_link(np))
+ of_phy_deregister_fixed_link(np);
+
+ return err;
}
/* PHY control start function */
@@ -1634,6 +1642,7 @@ static void ravb_set_rx_mode(struct net_device *ndev)
/* Device close function for Ethernet AVB */
static int ravb_close(struct net_device *ndev)
{
+ struct device_node *np = ndev->dev.parent->of_node;
struct ravb_private *priv = netdev_priv(ndev);
struct ravb_tstamp_skb *ts_skb, *ts_skb2;
@@ -1663,6 +1672,8 @@ static int ravb_close(struct net_device *ndev)
if (ndev->phydev) {
phy_stop(ndev->phydev);
phy_disconnect(ndev->phydev);
+ if (of_phy_is_fixed_link(np))
+ of_phy_deregister_fixed_link(np);
}
if (priv->chip_id != RCAR_GEN2) {
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on initialisation errors and on device close after having disconnected the PHY. Fixes: b4bc88a868ed ("ravb: Add fixed-link support") Signed-off-by: Johan Hovold <johan@kernel.org> --- drivers/net/ethernet/renesas/ravb_main.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)