diff mbox

[11/12] usb: phy: tahvo: Replace the deprecated extcon API

Message ID 1480485460-2663-12-git-send-email-cw00.choi@samsung.com (mailing list archive)
State Awaiting Upstream
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Chanwoo Choi Nov. 30, 2016, 5:57 a.m. UTC 
This patch replaces the deprecated extcon API as following:
- extcon_set_cable_state_() -> extcon_set_state_sync()

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/usb/phy/phy-tahvo.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Felipe Balbi Nov. 30, 2016, 10:42 a.m. UTC | #1 
Hi,

Chanwoo Choi <cw00.choi@samsung.com> writes:
> This patch replaces the deprecated extcon API as following:
> - extcon_set_cable_state_() -> extcon_set_state_sync()
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
diff mbox

Patch

diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index 1343bff004eb..9a7822e12156 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -121,7 +121,7 @@  static void check_vbus_state(struct tahvo_usb *tu)
 	prev_state = tu->vbus_state;
 	tu->vbus_state = reg & TAHVO_STAT_VBUS;
 	if (prev_state != tu->vbus_state) {
-		extcon_set_cable_state_(tu->extcon, EXTCON_USB, tu->vbus_state);
+		extcon_set_state_sync(tu->extcon, EXTCON_USB, tu->vbus_state);
 		sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
 	}
 }
@@ -130,7 +130,7 @@  static void tahvo_usb_become_host(struct tahvo_usb *tu)
 {
 	struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
 
-	extcon_set_cable_state_(tu->extcon, EXTCON_USB_HOST, true);
+	extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST, true);
 
 	/* Power up the transceiver in USB host mode */
 	retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
@@ -149,7 +149,7 @@  static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
 {
 	struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
 
-	extcon_set_cable_state_(tu->extcon, EXTCON_USB_HOST, false);
+	extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST, false);
 
 	/* Power up transceiver and set it in USB peripheral mode */
 	retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
@@ -379,9 +379,9 @@  static int tahvo_usb_probe(struct platform_device *pdev)
 	}
 
 	/* Set the initial cable state. */
-	extcon_set_cable_state_(tu->extcon, EXTCON_USB_HOST,
+	extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST,
 			       tu->tahvo_mode == TAHVO_MODE_HOST);
-	extcon_set_cable_state_(tu->extcon, EXTCON_USB, tu->vbus_state);
+	extcon_set_state_sync(tu->extcon, EXTCON_USB, tu->vbus_state);
 
 	/* Create OTG interface */
 	tahvo_usb_power_off(tu);