Message ID | 1487674788-12599-3-git-send-email-yoshihiro.shimoda.uh@renesas.com (mailing list archive) |
---|---|
State | Accepted |
Delegated to: | Geert Uytterhoeven |
Headers | show |
On Tue, Feb 21, 2017 at 07:59:48PM +0900, Yoshihiro Shimoda wrote: > This patch fixes an issue that a usb 1.1 device is not connected in > system resume and then the following message appeared if debug messages > are enabled: > usb 2-1: Waited 2000ms for CONNECT > > To resolve this issue, the EHCI controller must be resumed after its > companion controllers. So, this patch adds such code on the driver. > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > --- > drivers/usb/host/ehci-platform.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c > index a268d9e..3214300 100644 > --- a/drivers/usb/host/ehci-platform.c > +++ b/drivers/usb/host/ehci-platform.c > @@ -34,6 +34,7 @@ > #include <linux/usb.h> > #include <linux/usb/hcd.h> > #include <linux/usb/ehci_pdriver.h> > +#include <linux/usb/of.h> > > #include "ehci.h" > > @@ -297,6 +298,7 @@ static int ehci_platform_probe(struct platform_device *dev) > goto err_power; > > device_wakeup_enable(hcd->self.controller); > + device_enable_async_suspend(hcd->self.controller); > platform_set_drvdata(dev, hcd); > > return err; > @@ -370,6 +372,7 @@ static int ehci_platform_resume(struct device *dev) > struct usb_ehci_pdata *pdata = dev_get_platdata(dev); > struct platform_device *pdev = to_platform_device(dev); > struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); > + struct device *companion_dev; > > if (pdata->power_on) { > int err = pdata->power_on(pdev); > @@ -377,6 +380,10 @@ static int ehci_platform_resume(struct device *dev) > return err; > } > > + companion_dev = usb_of_get_companion_dev(hcd->self.controller); > + if (companion_dev) > + device_pm_wait_for_dev(hcd->self.controller, companion_dev); > + > ehci_resume(hcd, priv->reset_on_resume); > return 0; Reviewed-by: Peter Chen <peter.chen@nxp.com>
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index a268d9e..3214300 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -34,6 +34,7 @@ #include <linux/usb.h> #include <linux/usb/hcd.h> #include <linux/usb/ehci_pdriver.h> +#include <linux/usb/of.h> #include "ehci.h" @@ -297,6 +298,7 @@ static int ehci_platform_probe(struct platform_device *dev) goto err_power; device_wakeup_enable(hcd->self.controller); + device_enable_async_suspend(hcd->self.controller); platform_set_drvdata(dev, hcd); return err; @@ -370,6 +372,7 @@ static int ehci_platform_resume(struct device *dev) struct usb_ehci_pdata *pdata = dev_get_platdata(dev); struct platform_device *pdev = to_platform_device(dev); struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + struct device *companion_dev; if (pdata->power_on) { int err = pdata->power_on(pdev); @@ -377,6 +380,10 @@ static int ehci_platform_resume(struct device *dev) return err; } + companion_dev = usb_of_get_companion_dev(hcd->self.controller); + if (companion_dev) + device_pm_wait_for_dev(hcd->self.controller, companion_dev); + ehci_resume(hcd, priv->reset_on_resume); return 0; }
This patch fixes an issue that a usb 1.1 device is not connected in system resume and then the following message appeared if debug messages are enabled: usb 2-1: Waited 2000ms for CONNECT To resolve this issue, the EHCI controller must be resumed after its companion controllers. So, this patch adds such code on the driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- drivers/usb/host/ehci-platform.c | 7 +++++++ 1 file changed, 7 insertions(+)