| Message ID | 1497451130-7741-5-git-send-email-ulrich.hecht+renesas@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Simon Horman |
| Headers | show |
On Wed, Jun 14, 2017 at 9:38 AM, Ulrich Hecht <ulrich.hecht+renesas@gmail.com> wrote: > Adds serial port SCIF1 and the MAX9260 deserializers connected to it. > > Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> > --- > arch/arm/boot/dts/r8a7792-blanche.dts | 45 +++++++++++++++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts > index 9b67dca..281484d 100644 > --- a/arch/arm/boot/dts/r8a7792-blanche.dts > +++ b/arch/arm/boot/dts/r8a7792-blanche.dts > @@ -21,6 +21,7 @@ > aliases { > serial0 = &scif0; > serial1 = &scif3; > + serial2 = &scif1; > }; > > chosen { > @@ -202,6 +203,11 @@ > function = "scif0"; > }; > > + scif1_pins: scif1 { > + groups = "scif1_data"; > + function = "scif1"; > + }; > + > scif3_pins: scif3 { > groups = "scif3_data"; > function = "scif3"; > @@ -246,6 +252,45 @@ > status = "okay"; > }; > > +&scif1 { > + pinctrl-0 = <&scif1_pins>; > + pinctrl-names = "default"; > + > + status = "okay"; > + > + mux-select-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, > + <&gpio5 13 GPIO_ACTIVE_LOW>, > + <&gpio5 14 GPIO_ACTIVE_LOW>, > + <&gpio5 15 GPIO_ACTIVE_LOW>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + gmsl-deserializer@0 { > + compatible = "maxim,max9260"; > + reg = <0x8>; You need to document how muxed serdev devices are represented in general. As Peter mentioned, you should use the mux-ctrl binding. Maybe this should have a mux node here too. That helps if we ever have other child nodes on the UART. The unit address and reg property values should match. > + }; > + gmsl-deserializer@1 { > + compatible = "maxim,max9260"; > + reg = <0x9>; > + }; > + gmsl-deserializer@2 { > + compatible = "maxim,max9260"; > + reg = <0xa>; > + }; > + gmsl-deserializer@3 { > + compatible = "maxim,max9260"; > + reg = <0xb>; > + }; > + gmsl-deserializer@4 { > + compatible = "maxim,max9260"; > + reg = <0x4>; > + }; > + gmsl-deserializer@5 { > + compatible = "maxim,max9260"; > + reg = <0x5>; > + }; > +}; > + > &scif3 { > pinctrl-0 = <&scif3_pins>; > pinctrl-names = "default"; > -- > 2.7.4 >
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index 9b67dca..281484d 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -21,6 +21,7 @@ aliases { serial0 = &scif0; serial1 = &scif3; + serial2 = &scif1; }; chosen { @@ -202,6 +203,11 @@ function = "scif0"; }; + scif1_pins: scif1 { + groups = "scif1_data"; + function = "scif1"; + }; + scif3_pins: scif3 { groups = "scif3_data"; function = "scif3"; @@ -246,6 +252,45 @@ status = "okay"; }; +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; + + mux-select-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, + <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio5 14 GPIO_ACTIVE_LOW>, + <&gpio5 15 GPIO_ACTIVE_LOW>; + + #address-cells = <1>; + #size-cells = <0>; + gmsl-deserializer@0 { + compatible = "maxim,max9260"; + reg = <0x8>; + }; + gmsl-deserializer@1 { + compatible = "maxim,max9260"; + reg = <0x9>; + }; + gmsl-deserializer@2 { + compatible = "maxim,max9260"; + reg = <0xa>; + }; + gmsl-deserializer@3 { + compatible = "maxim,max9260"; + reg = <0xb>; + }; + gmsl-deserializer@4 { + compatible = "maxim,max9260"; + reg = <0x4>; + }; + gmsl-deserializer@5 { + compatible = "maxim,max9260"; + reg = <0x5>; + }; +}; + &scif3 { pinctrl-0 = <&scif3_pins>; pinctrl-names = "default";
Adds serial port SCIF1 and the MAX9260 deserializers connected to it. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> --- arch/arm/boot/dts/r8a7792-blanche.dts | 45 +++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)