[v2,1/2] dt-bindings: media: i2c: Document MT9V111 bindings

Commit Message

Jacopo Mondi July 25, 2018, 1:44 p.m. UTC

From: Jacopo Mondi <[e-mail]>

Add documentation for Aptina MT9V111 image sensor.

Reviewed-by: Rob Herring <[e-mail]>
Signed-off-by: Jacopo Mondi <[e-mail]>
---
 .../bindings/media/i2c/aptina,mt9v111.txt          | 46 ++++++++++++++++++++++
 MAINTAINERS                                        |  8 ++++
 2 files changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt

--
2.7.4

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
new file mode 100644
index 0000000..bd896e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
@@ -0,0 +1,46 @@ 
+* Aptina MT9V111 CMOS sensor
+----------------------------
+
+The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
+based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
+
+The sensor has an active pixel array of 640x480 pixels and can output a number
+of image resolution and formats controllable through a simple two-wires
+interface.
+
+Required properties:
+--------------------
+
+- compatible: shall be "aptina,mt9v111".
+- clocks: reference to the system clock input provider.
+
+Optional properties:
+--------------------
+
+- enable-gpios: output enable signal, pin name "OE#". Active low.
+- standby-gpios: low power state control signal, pin name "STANDBY".
+  Active high.
+- reset-gpios: chip reset signal, pin name "RESET#". Active low.
+
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+--------
+
+        &i2c1 {
+                camera@48 {
+                        compatible = "aptina,mt9v111";
+                        reg = <0x48>;
+
+                        clocks = <&camera_clk>;
+
+                        port {
+                                mt9v111_out: endpoint {
+                                        remote-endpoint = <&ceu_in>;
+                                };
+                        };
+                };
+        };
diff --git a/MAINTAINERS b/MAINTAINERS
index bbd9b9b..4ab113c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9651,6 +9651,14 @@  F:	Documentation/devicetree/bindings/media/i2c/mt9v032.txt
 F:	drivers/media/i2c/mt9v032.c
 F:	include/media/i2c/mt9v032.h

+MT9V111 APTINA CAMERA SENSOR
+M:	Jacopo Mondi <[e-mail]>
+L:	[e-mail]
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
+F:	drivers/media/i2c/mt9v111.c
+
 MULTIFUNCTION DEVICES (MFD)
 M:	Lee Jones <[e-mail]>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git