diff mbox series

[3/4] ARM: dts: iwg23s-sbc: specify EtherAVB PHY IRQ

Message ID 1532685089-35645-4-git-send-email-biju.das@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Simon Horman
Headers show
Series Add GPIO and EAVB Pinctrl support | expand

Commit Message

Biju Das July 27, 2018, 9:51 a.m. UTC 
Specify  EtherAVB PHY IRQ  in the board specific device tree, now that we
have GPIO support.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 2 ++
 1 file changed, 2 insertions(+)

Comments

Geert Uytterhoeven July 30, 2018, 10:06 a.m. UTC | #1 
On Fri, Jul 27, 2018 at 11:57 AM Biju Das <biju.das@bp.renesas.com> wrote:
> Specify  EtherAVB PHY IRQ  in the board specific device tree, now that we
> have GPIO support.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 56182ee..22da819 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -35,6 +35,8 @@ 
 
 	phy3: ethernet-phy@3 {
 		reg = <3>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 	};
 };