| Message ID | 1555313834-15107-2-git-send-email-masonccyang@mxic.com.tw (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | mfd: Add Renesas R-Car Gen3 RPC-IF MFD & SPI driver | expand |
The patch name is somewhat misleading -- there's no "MFD controller". On 04/15/2019 10:37 AM, Mason Yang wrote: > Add a driver for Renesas R-Car Gen3 RPC-IF MFD controller. > > Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> [...] > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 26ad646..7914349 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -978,6 +978,15 @@ config MFD_RDC321X > southbridge which provides access to GPIOs and Watchdog using the > southbridge PCI device configuration space. > > +config MFD_RENESAS_RPC > + tristate "Renesas R-Car Gen3 RPC-IF MFD driver" > + select MFD_CORE > + depends on ARCH_RENESAS > + help > + This supports for Renesas R-Car Gen3 RPC-IF multifunction device "For" node needed here. > + controller which provides either SPI host controller or HyperFlash. > + You have to select individual components under the corresponding menu. > + > config MFD_RT5033 > tristate "Richtek RT5033 Power Management IC" > depends on I2C [...] > diff --git a/drivers/mfd/renesas-rpc.c b/drivers/mfd/renesas-rpc.c > new file mode 100644 > index 0000000..a565f31 > --- /dev/null > +++ b/drivers/mfd/renesas-rpc.c > @@ -0,0 +1,128 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// > +// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp. > +// Copyright (C) 2019 Macronix International Co., Ltd. > +// > +// R-Car Gen3 RPC-IF MFD driver > +// > +// Author: > +// Mason Yang <masonccyang@mxic.com.tw> > +// > + > +#include <linux/mfd/renesas-rpc.h> > +#include <linux/mfd/core.h> > + > +static const struct mfd_cell rpc_hf_ctlr = { > + .name = "rpc-hf", > + .of_compatible = "renesas,rcar-rpc-hf", Don't need this line any more... > +}; > + > +static const struct mfd_cell rpc_spi_ctlr = { > + .name = "rpc-spi", > + .of_compatible = "renesas,rcar-rpc-spi", ... and this too. [...] > +static int rpc_mfd_probe(struct platform_device *pdev) > +{ > + struct device_node *flash; > + const struct mfd_cell *cell; > + struct resource *res; > + struct rpc_mfd *rpc; > + void __iomem *base; > + int ret; > + > + flash = of_get_next_child(pdev->dev.of_node, NULL); > + if (!flash) { > + dev_warn(&pdev->dev, "no flash node found\n"); > + return -ENODEV; > + } > + > + ret = of_device_is_compatible(flash, "jedec,spi-nor"); > + if (ret) { > + cell = &rpc_spi_ctlr; > + } else { > + ret = of_device_is_compatible(flash, "cfi-flash"); > + if (ret) { > + cell = &rpc_hf_ctlr; > + } else { > + dev_warn(&pdev->dev, "no jedec spi/cfi device found\n"); > + return -ENODEV; > + } > + } This definitely should look simpler, like below: if (of_device_is_compatible(flash, "jedec,spi-nor")) { cell = &rpc_spi_ctlr; } else if (of_device_is_compatible(flash, "cfi-flash")) { cell = &rpc_hf_ctlr; } else { dev_warn(&pdev->dev, "unknown flash type\n"); return -ENODEV; } [...] > + ret = devm_mfd_add_devices(&pdev->dev, -1, cell, 1, NULL, 0, NULL); > + > + return ret; return devm_mfd_add_devices(&pdev->dev, -1, cell, 1, NULL, 0, NULL); [...] > diff --git a/include/linux/mfd/renesas-rpc.h b/include/linux/mfd/renesas-rpc.h > new file mode 100644 > index 0000000..61ada14 > --- /dev/null > +++ b/include/linux/mfd/renesas-rpc.h > @@ -0,0 +1,153 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// > +// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp. > +// Copyright (C) 2019 Macronix International Co., Ltd. > +// > +// R-Car Gen3 RPC-IF MFD driver > +// > +// Author: > +// Mason Yang <masonccyang@mxic.com.tw> > +// > + > +#ifndef __MFD_RENESAS_RPC_H > +#define __MFD_RENESAS_RPC_H > + > +#include <linux/clk.h> > +#include <linux/io.h> > +#include <linux/log2.h> > +#include <linux/iopoll.h> > +#include <linux/module.h> > +#include <linux/mtd/mtd.h> > +#include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > +#include <linux/of.h> > +#include <linux/regmap.h> > +#include <linux/reset.h> NAK. I have already told you that these #include's are only needed in the drivers, not in this header. My idea is to contain all hardware manipulation in the MFD driver, with SPI/HF drivers calling that code via a set of APIs declared in this header. The registers (declared below) would end up only needed by that common MFD driver... [...] MBR, Sergei
On 04/16/2019 04:19 AM, masonccyang@mxic.com.tw wrote: >> Re: [PATCH v10 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD controller driver >> >> The patch name is somewhat misleading -- there's no "MFD controller". > > Can't get your point ? > > RPC-IF support SPI and HF, it's a MFD controller and > that's why I patch it to MFD as Marek's comments. I'd like the "controller" word dropped, as MFD stands for multi-function device anyway. "Controller" seems to be superfluous here... >> On 04/15/2019 10:37 AM, Mason Yang wrote: >> >> > Add a driver for Renesas R-Car Gen3 RPC-IF MFD controller. >> > >> > Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> >> [...] >> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig >> > index 26ad646..7914349 100644 >> > --- a/drivers/mfd/Kconfig >> > +++ b/drivers/mfd/Kconfig >> > @@ -978,6 +978,15 @@ config MFD_RDC321X >> > southbridge which provides access to GPIOs and Watchdog using the >> > southbridge PCI device configuration space. >> > >> > +config MFD_RENESAS_RPC >> > + tristate "Renesas R-Car Gen3 RPC-IF MFD driver" >> > + select MFD_CORE >> > + depends on ARCH_RENESAS >> > + help >> > + This supports for Renesas R-Car Gen3 RPC-IF multifunction device >> >> "For" node needed here. > > ? Sorry, that was a typo: s/node/not/. >> [...] >> > diff --git a/include/linux/mfd/renesas-rpc.h b/include/linux/mfd/ >> renesas-rpc.h >> > new file mode 100644 >> > index 0000000..61ada14 >> > --- /dev/null >> > +++ b/include/linux/mfd/renesas-rpc.h >> > @@ -0,0 +1,153 @@ >> > +// SPDX-License-Identifier: GPL-2.0 >> > +// >> > +// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp. >> > +// Copyright (C) 2019 Macronix International Co., Ltd. >> > +// >> > +// R-Car Gen3 RPC-IF MFD driver >> > +// >> > +// Author: >> > +// Mason Yang <masonccyang@mxic.com.tw> >> > +// >> > + >> > +#ifndef __MFD_RENESAS_RPC_H >> > +#define __MFD_RENESAS_RPC_H >> > + >> > +#include <linux/clk.h> >> > +#include <linux/io.h> >> > +#include <linux/log2.h> >> > +#include <linux/iopoll.h> >> > +#include <linux/module.h> >> > +#include <linux/mtd/mtd.h> >> > +#include <linux/platform_device.h> >> > +#include <linux/pm_runtime.h> >> > +#include <linux/of.h> >> > +#include <linux/regmap.h> >> > +#include <linux/reset.h> >> >> NAK. I have already told you that these #include's are only needed in the >> drivers, not in this header. > > why ? Why what? As a rule of thumb, we #include only headers necessary to build the file in question. > I think these #include files are still needed in HyperFlash driver. Hopefully not. Though that doesn't really matter much. > i.e,. clk controller, mtd and so on. > >> >> My idea is to contain all hardware manipulation in the MFD driver, >> with SPI/HF drivers calling that code via a set of APIs declared in >> this header. >> The registers (declared below) would end up only needed by that >> common MFD driver... > > best regards, > Mason MBR, Sergei
On 04/17/2019 09:21 AM, masonccyang@mxic.com.tw wrote: >> >> Re: [PATCH v10 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD >> controller driver >> >> >> >> The patch name is somewhat misleading -- there's no "MFD controller". >> > >> > Can't get your point ? >> > >> > RPC-IF support SPI and HF, it's a MFD controller and >> > that's why I patch it to MFD as Marek's comments. >> >> I'd like the "controller" word dropped, as MFD stands for multi- >> function device >> anyway. "Controller" seems to be superfluous here... > > okay, will rename to: > > [PATCH v11 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver Thanx! >> >> On 04/15/2019 10:37 AM, Mason Yang wrote: >> >> >> >> > Add a driver for Renesas R-Car Gen3 RPC-IF MFD controller. >> >> > >> >> > Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> >> >> [...] >> >> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig >> >> > index 26ad646..7914349 100644 >> >> > --- a/drivers/mfd/Kconfig >> >> > +++ b/drivers/mfd/Kconfig >> >> > @@ -978,6 +978,15 @@ config MFD_RDC321X >> >> > southbridge which provides access to GPIOs and Watchdog using the >> >> > southbridge PCI device configuration space. >> >> > >> >> > +config MFD_RENESAS_RPC >> >> > + tristate "Renesas R-Car Gen3 RPC-IF MFD driver" >> >> > + select MFD_CORE >> >> > + depends on ARCH_RENESAS >> >> > + help >> >> > + This supports for Renesas R-Car Gen3 RPC-IF multifunction device >> >> >> >> "For" node needed here. >> > >> > ? >> >> Sorry, that was a typo: s/node/not/. > > Oops, still don't know what do you mean to ? > > Will change to: > help > This supports for Renesas R-Car Gen3 RPC-IF multifunction device > which provides either SPI host or HyperFlash. > You have to select individual components under the corresponding menu. > > is it ok ? Should be "This supports Renesas..." [...] MBR, Sergei
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 26ad646..7914349 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -978,6 +978,15 @@ config MFD_RDC321X southbridge which provides access to GPIOs and Watchdog using the southbridge PCI device configuration space. +config MFD_RENESAS_RPC + tristate "Renesas R-Car Gen3 RPC-IF MFD driver" + select MFD_CORE + depends on ARCH_RENESAS + help + This supports for Renesas R-Car Gen3 RPC-IF multifunction device + controller which provides either SPI host controller or HyperFlash. + You have to select individual components under the corresponding menu. + config MFD_RT5033 tristate "Richtek RT5033 Power Management IC" depends on I2C diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index b4569ed7..4a49699 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -183,6 +183,7 @@ obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) += intel_quark_i2c_gpio.o obj-$(CONFIG_LPC_SCH) += lpc_sch.o obj-$(CONFIG_LPC_ICH) += lpc_ich.o obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.o +obj-$(CONFIG_MFD_RENESAS_RPC) += renesas-rpc.o obj-$(CONFIG_MFD_JANZ_CMODIO) += janz-cmodio.o obj-$(CONFIG_MFD_JZ4740_ADC) += jz4740-adc.o obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o diff --git a/drivers/mfd/renesas-rpc.c b/drivers/mfd/renesas-rpc.c new file mode 100644 index 0000000..a565f31 --- /dev/null +++ b/drivers/mfd/renesas-rpc.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp. +// Copyright (C) 2019 Macronix International Co., Ltd. +// +// R-Car Gen3 RPC-IF MFD driver +// +// Author: +// Mason Yang <masonccyang@mxic.com.tw> +// + +#include <linux/mfd/renesas-rpc.h> +#include <linux/mfd/core.h> + +static const struct mfd_cell rpc_hf_ctlr = { + .name = "rpc-hf", + .of_compatible = "renesas,rcar-rpc-hf", +}; + +static const struct mfd_cell rpc_spi_ctlr = { + .name = "rpc-spi", + .of_compatible = "renesas,rcar-rpc-spi", +}; + +static const struct regmap_range rpc_mfd_volatile_ranges[] = { + regmap_reg_range(RPC_SMRDR0, RPC_SMRDR1), + regmap_reg_range(RPC_SMWDR0, RPC_SMWDR1), + regmap_reg_range(RPC_CMNSR, RPC_CMNSR), +}; + +static const struct regmap_access_table rpc_mfd_volatile_table = { + .yes_ranges = rpc_mfd_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(rpc_mfd_volatile_ranges), +}; + +static const struct regmap_config rpc_mfd_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .fast_io = true, + .max_register = RPC_PHYOFFSET2, + .volatile_table = &rpc_mfd_volatile_table, +}; + +static int rpc_mfd_probe(struct platform_device *pdev) +{ + struct device_node *flash; + const struct mfd_cell *cell; + struct resource *res; + struct rpc_mfd *rpc; + void __iomem *base; + int ret; + + flash = of_get_next_child(pdev->dev.of_node, NULL); + if (!flash) { + dev_warn(&pdev->dev, "no flash node found\n"); + return -ENODEV; + } + + ret = of_device_is_compatible(flash, "jedec,spi-nor"); + if (ret) { + cell = &rpc_spi_ctlr; + } else { + ret = of_device_is_compatible(flash, "cfi-flash"); + if (ret) { + cell = &rpc_hf_ctlr; + } else { + dev_warn(&pdev->dev, "no jedec spi/cfi device found\n"); + return -ENODEV; + } + } + + rpc = devm_kzalloc(&pdev->dev, sizeof(*rpc), GFP_KERNEL); + if (!rpc) + return -ENOMEM; + + rpc->clk_rpc = devm_clk_get(&pdev->dev, "rpc"); + if (IS_ERR(rpc->clk_rpc)) + return PTR_ERR(rpc->clk_rpc); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + rpc->regmap = devm_regmap_init_mmio(&pdev->dev, base, + &rpc_mfd_regmap_config); + if (IS_ERR(rpc->regmap)) { + dev_err(&pdev->dev, + "failed to init regmap for rpc-mfd, error %ld\n", + PTR_ERR(rpc->regmap)); + return PTR_ERR(rpc->regmap); + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap"); + rpc->dirmap = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(rpc->dirmap)) + rpc->dirmap = NULL; + + rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(rpc->rstc)) + return PTR_ERR(rpc->rstc); + + platform_set_drvdata(pdev, rpc); + + ret = devm_mfd_add_devices(&pdev->dev, -1, cell, 1, NULL, 0, NULL); + + return ret; +} + +static const struct of_device_id rpc_mfd_of_match[] = { + { .compatible = "renesas,rcar-gen3-rpc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, rpc_mfd_of_match); + +static struct platform_driver rpc_mfd_driver = { + .probe = rpc_mfd_probe, + .driver = { + .name = "rpc-mfd", + .of_match_table = rpc_mfd_of_match, + }, +}; +module_platform_driver(rpc_mfd_driver); + +MODULE_AUTHOR("Mason Yang <masonccyang@mxic.com.tw>"); +MODULE_DESCRIPTION("Renesas R-Car Gen3 RPC MFD driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/renesas-rpc.h b/include/linux/mfd/renesas-rpc.h new file mode 100644 index 0000000..61ada14 --- /dev/null +++ b/include/linux/mfd/renesas-rpc.h @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp. +// Copyright (C) 2019 Macronix International Co., Ltd. +// +// R-Car Gen3 RPC-IF MFD driver +// +// Author: +// Mason Yang <masonccyang@mxic.com.tw> +// + +#ifndef __MFD_RENESAS_RPC_H +#define __MFD_RENESAS_RPC_H + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/log2.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/reset.h> + +#define RPC_CMNCR 0x0000 // R/W +#define RPC_CMNCR_MD BIT(31) +#define RPC_CMNCR_SFDE BIT(24) // undocumented bit but must be set +#define RPC_CMNCR_MOIIO3(val) (((val) & 0x3) << 22) +#define RPC_CMNCR_MOIIO2(val) (((val) & 0x3) << 20) +#define RPC_CMNCR_MOIIO1(val) (((val) & 0x3) << 18) +#define RPC_CMNCR_MOIIO0(val) (((val) & 0x3) << 16) +#define RPC_CMNCR_MOIIO_HIZ (RPC_CMNCR_MOIIO0(3) | RPC_CMNCR_MOIIO1(3) | \ + RPC_CMNCR_MOIIO2(3) | RPC_CMNCR_MOIIO3(3)) +#define RPC_CMNCR_IO3FV(val) (((val) & 0x3) << 14) // undocumented +#define RPC_CMNCR_IO2FV(val) (((val) & 0x3) << 12) // undocumented +#define RPC_CMNCR_IO0FV(val) (((val) & 0x3) << 8) +#define RPC_CMNCR_IOFV_HIZ (RPC_CMNCR_IO0FV(3) | RPC_CMNCR_IO2FV(3) | \ + RPC_CMNCR_IO3FV(3)) +#define RPC_CMNCR_BSZ(val) (((val) & 0x3) << 0) + +#define RPC_SSLDR 0x0004 // R/W +#define RPC_SSLDR_SPNDL(d) (((d) & 0x7) << 16) +#define RPC_SSLDR_SLNDL(d) (((d) & 0x7) << 8) +#define RPC_SSLDR_SCKDL(d) (((d) & 0x7) << 0) + +#define RPC_DRCR 0x000C // R/W +#define RPC_DRCR_SSLN BIT(24) +#define RPC_DRCR_RBURST(v) ((((v) - 1) & 0x1F) << 16) +#define RPC_DRCR_RCF BIT(9) +#define RPC_DRCR_RBE BIT(8) +#define RPC_DRCR_SSLE BIT(0) + +#define RPC_DRCMR 0x0010 // R/W +#define RPC_DRCMR_CMD(c) (((c) & 0xFF) << 16) +#define RPC_DRCMR_OCMD(c) (((c) & 0xFF) << 0) + +#define RPC_DREAR 0x0014 // R/W +#define RPC_DREAR_EAV(c) (((c) & 0xf) << 16) +#define RPC_DREAR_EAC(c) (((c) & 0x7) << 0) + +#define RPC_DROPR 0x0018 // R/W + +#define RPC_DRENR 0x001C // R/W +#define RPC_DRENR_CDB(o) (u32)((((o) & 0x3) << 30)) +#define RPC_DRENR_OCDB(o) (((o) & 0x3) << 28) +#define RPC_DRENR_ADB(o) (((o) & 0x3) << 24) +#define RPC_DRENR_OPDB(o) (((o) & 0x3) << 20) +#define RPC_DRENR_DRDB(o) (((o) & 0x3) << 16) +#define RPC_DRENR_DME BIT(15) +#define RPC_DRENR_CDE BIT(14) +#define RPC_DRENR_OCDE BIT(12) +#define RPC_DRENR_ADE(v) (((v) & 0xF) << 8) +#define RPC_DRENR_OPDE(v) (((v) & 0xF) << 4) + +#define RPC_SMCR 0x0020 // R/W +#define RPC_SMCR_SSLKP BIT(8) +#define RPC_SMCR_SPIRE BIT(2) +#define RPC_SMCR_SPIWE BIT(1) +#define RPC_SMCR_SPIE BIT(0) + +#define RPC_SMCMR 0x0024 // R/W +#define RPC_SMCMR_CMD(c) (((c) & 0xFF) << 16) +#define RPC_SMCMR_OCMD(c) (((c) & 0xFF) << 0) + +#define RPC_SMADR 0x0028 // R/W +#define RPC_SMOPR 0x002C // R/W +#define RPC_SMOPR_OPD3(o) (((o) & 0xFF) << 24) +#define RPC_SMOPR_OPD2(o) (((o) & 0xFF) << 16) +#define RPC_SMOPR_OPD1(o) (((o) & 0xFF) << 8) +#define RPC_SMOPR_OPD0(o) (((o) & 0xFF) << 0) + +#define RPC_SMENR 0x0030 // R/W +#define RPC_SMENR_CDB(o) (((o) & 0x3) << 30) +#define RPC_SMENR_OCDB(o) (((o) & 0x3) << 28) +#define RPC_SMENR_ADB(o) (((o) & 0x3) << 24) +#define RPC_SMENR_OPDB(o) (((o) & 0x3) << 20) +#define RPC_SMENR_SPIDB(o) (((o) & 0x3) << 16) +#define RPC_SMENR_DME BIT(15) +#define RPC_SMENR_CDE BIT(14) +#define RPC_SMENR_OCDE BIT(12) +#define RPC_SMENR_ADE(v) (((v) & 0xF) << 8) +#define RPC_SMENR_OPDE(v) (((v) & 0xF) << 4) +#define RPC_SMENR_SPIDE(v) (((v) & 0xF) << 0) + +#define RPC_SMRDR0 0x0038 // R +#define RPC_SMRDR1 0x003C // R +#define RPC_SMWDR0 0x0040 // W +#define RPC_SMWDR1 0x0044 // W + +#define RPC_CMNSR 0x0048 // R +#define RPC_CMNSR_SSLF BIT(1) +#define RPC_CMNSR_TEND BIT(0) + +#define RPC_DRDMCR 0x0058 // R/W +#define RPC_DRDRENR 0x005C // R/W + +#define RPC_SMDMCR 0x0060 // R/W +#define RPC_SMDMCR_DMCYC(v) ((((v) - 1) & 0x1F) << 0) + +#define RPC_SMDRENR 0x0064 // R/W +#define RPC_SMDRENR_HYPE (0x7 << 12) +#define RPC_SMDRENR_ADDRE BIT(8) +#define RPC_SMDRENR_OPDRE BIT(4) +#define RPC_SMDRENR_SPIDRE BIT(0) + +#define RPC_PHYCNT 0x007C // R/W +#define RPC_PHYCNT_CAL BIT(31) +#define PRC_PHYCNT_OCTA_AA BIT(22) +#define PRC_PHYCNT_OCTA_SA BIT(23) +#define PRC_PHYCNT_EXDS BIT(21) +#define RPC_PHYCNT_OCT BIT(20) +#define RPC_PHYCNT_STRTIM(v) (((v) & 0x7) << 15) +#define RPC_PHYCNT_WBUF2 BIT(4) +#define RPC_PHYCNT_WBUF BIT(2) +#define RPC_PHYCNT_PHYMEM(v) (((v) & 0x3) << 0) + +#define RPC_PHYOFFSET1 0x0080 // R/W +#define RPC_PHYOFFSET1_DDRTMG(v) (((v) & 0x3) << 28) +#define RPC_PHYOFFSET2 0x0084 // R/W +#define RPC_PHYOFFSET2_OCTTMG(v) (((v) & 0x7) << 8) + +#define RPC_DIRMAP_SIZE 0x4000000 + +struct rpc_mfd { + struct clk *clk_rpc; + void __iomem *dirmap; + struct regmap *regmap; + struct reset_control *rstc; +}; + +#endif // __MFD_RENESAS_RPC_H
Add a driver for Renesas R-Car Gen3 RPC-IF MFD controller. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> --- drivers/mfd/Kconfig | 9 +++ drivers/mfd/Makefile | 1 + drivers/mfd/renesas-rpc.c | 128 +++++++++++++++++++++++++++++++++ include/linux/mfd/renesas-rpc.h | 153 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 291 insertions(+) create mode 100644 drivers/mfd/renesas-rpc.c create mode 100644 include/linux/mfd/renesas-rpc.h