@@ -23,12 +23,6 @@
stdout-path = "serial0:115200n8";
};
- memory@48000000 {
- device_type = "memory";
- /* first 128MB is reserved for secure area. */
- reg = <0x0 0x48000000 0x0 0x38000000>;
- };
-
audio_clkout: audio-clkout {
/*
* This is same as <&rcar_sound 0>
@@ -107,36 +101,10 @@
};
};
- vga {
- compatible = "vga-connector";
-
- port {
- vga_in: endpoint {
- remote-endpoint = <&adv7123_out>;
- };
- };
- };
-
- vga-encoder {
- compatible = "adi,adv7123";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7123_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
- port@1 {
- reg = <1>;
- adv7123_out: endpoint {
- remote-endpoint = <&vga_in>;
- };
- };
- };
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
};
reg_1p8v: regulator0 {
@@ -157,15 +125,13 @@
regulator-always-on;
};
- vbus0_usb2: regulator-vbus0-usb2 {
+ reg_12p0v: regulator2 {
compatible = "regulator-fixed";
-
- regulator-name = "USB20_VBUS_CN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ regulator-name = "D12.0V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
};
rsnd_ak4613: sound {
@@ -185,25 +151,15 @@
};
};
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
- };
-
- reg_12p0v: regulator2 {
+ vbus0_usb2: regulator-vbus0-usb2 {
compatible = "regulator-fixed";
- regulator-name = "D12.0V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-boot-on;
- regulator-always-on;
- };
- x13_clk: x13 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <74250000>;
+ regulator-name = "USB20_VBUS_CN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
vcc_sdhi0: regulator-vcc-sdhi0 {
@@ -253,6 +209,50 @@
states = <3300000 1
1800000 0>;
};
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ x13_clk: x13 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
};
&audio_clk_a {
@@ -547,6 +547,11 @@
function = "pwm5";
};
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
@@ -577,20 +582,15 @@
power-source = <1800>;
};
- sound_pins: sound {
- groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
- function = "ssi";
- };
-
sound_clk_pins: sound_clk {
groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
"audio_clkout_a", "audio_clkout1_a";
function = "audio_clk";
};
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
+ function = "ssi";
};
usb0_pins: usb {
@@ -671,38 +671,6 @@
status = "okay";
};
-&ssi1 {
- shared-pin;
-};
-
-&usb2_phy0 {
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-
- vbus-supply = <&vbus0_usb2>;
- status = "okay";
-};
-
-&usb3_peri0 {
- companion = <&xhci0>;
- status = "okay";
-};
-
-&vin4 {
- status = "okay";
-};
-
-&vin5 {
- status = "okay";
-};
-
-&xhci0 {
- pinctrl-0 = <&usb30_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-1 = <&sdhi0_pins_uhs>;
@@ -746,3 +714,35 @@
non-removable;
status = "okay";
};
+
+&ssi1 {
+ shared-pin;
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
+&usb3_peri0 {
+ companion = <&xhci0>;
+ status = "okay";
+};
+
+&vin4 {
+ status = "okay";
+};
+
+&vin5 {
+ status = "okay";
+};
+
+&xhci0 {
+ pinctrl-0 = <&usb30_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
Sort nodes. If node address is present * Sort by node address, grouping all nodes with the same compat string and sorting the group alphabetically. Else * Sort alphabetically This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> --- This patch is based on the master branch of Geert Uytterhoeven's renesas-devel tree. arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 202 ++++++++++++------------- 1 file changed, 101 insertions(+), 101 deletions(-)