diff mbox series

[07/21] ARM: dts: rskrza1: Add remaining LEDs

Message ID 1792a0f35319af8bf2726ed12bef5194d397d3d1.1555655522.git.horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit 1792a0f35319af8bf2726ed12bef5194d397d3d1
Delegated to: Simon Horman
Headers show
Series [01/21] ARM: dts: r8a7792: blanche: Add IIC3 and DA9063 PMIC node | expand

Commit Message

Simon Horman April 19, 2019, 2:34 p.m. UTC 
From: Geert Uytterhoeven <geert+renesas@glider.be>

Describe the remaining 3 LEDs, which are driven by the first CAT9554
port expander.

Drop the superfluous status property from the leds node while at it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100-rskrza1.dts | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 60e80ecbbf68..ff24301dc1be 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -34,12 +34,23 @@ 
 	};
 
 	leds {
-		status = "okay";
 		compatible = "gpio-leds";
 
 		led0 {
 			gpios = <&port7 1 GPIO_ACTIVE_LOW>;
 		};
+
+		led1 {
+			gpios = <&io_expander1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			gpios = <&io_expander1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			gpios = <&io_expander1 2 GPIO_ACTIVE_LOW>;
+		};
 	};
 };