@@ -7,8 +7,8 @@ &electric_1 {
hvac_2: hvac-large-1 {
compatible = "ot,hvac-large";
- heat-range = < 40 75 >;
- cool-range = < 65 80 >;
+ heat-range = <40 75>;
+ cool-range = <65 80>;
};
};
@@ -23,11 +23,11 @@ ride@100 {
#size-cells = <1>;
track@30 {
- incline-up = < 48 32 16 >;
+ incline-up = <48 32 16>;
};
track@40 {
- incline-up = < 47 31 15 >;
+ incline-up = <47 31 15>;
};
};
@@ -35,22 +35,22 @@ ride_200: ride@200 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ot,ferris-wheel";
- reg = < 0x00000200 0x100 >;
- hvac-provider = < &hvac_2 >;
- hvac-thermostat = < 27 32 > ;
- hvac-zones = < 12 5 >;
+ reg = <0x00000200 0x100>;
+ hvac-provider = <&hvac_2>;
+ hvac-thermostat = <27 32> ;
+ hvac-zones = <12 5>;
hvac-zone-names = "operator", "snack-bar";
- spin-controller = < &spin_ctrl_1 3 >;
- spin-rph = < 30 >;
- gondolas = < 16 >;
- gondola-capacity = < 6 >;
+ spin-controller = <&spin_ctrl_1 3>;
+ spin-rph = <30>;
+ gondolas = <16>;
+ gondola-capacity = <6>;
ride_200_left: track@10 {
- reg = < 0x00000010 0x10 >;
+ reg = <0x00000010 0x10>;
};
ride_200_right: track@20 {
- reg = < 0x00000020 0x10 >;
+ reg = <0x00000020 0x10>;
};
};
};
@@ -58,5 +58,5 @@ ride_200_right: track@20 {
&lights_2 {
status = "okay";
color = "purple", "white", "red", "green";
- rate = < 3 256 >;
+ rate = <3 256>;
};
@@ -15,13 +15,13 @@
&electric_1 {
motor-1 {
controller {
- power_bus = < 0x1 0x2 >;
+ power_bus = <0x1 0x2>;
};
};
};
&spin_ctrl_1 {
controller {
- power_bus_emergency = < 0x101 0x102 >;
+ power_bus_emergency = <0x101 0x102>;
};
};
@@ -26,13 +26,13 @@
&electric_1 {
motor-1 {
electric {
- rpm_avail = < 100 >;
+ rpm_avail = <100>;
};
};
};
&spin_ctrl_1 {
electric {
- rpm_avail = < 100 200 >;
+ rpm_avail = <100 200>;
};
};
@@ -7,7 +7,7 @@ &electric_1 {
// is applied. There is already a phandle value
// in the base tree for motor-1.
spin_ctrl_1_conflict: motor-1 {
- accelerate = < 3 >;
- decelerate = < 5 >;
+ accelerate = <3>;
+ decelerate = <5>;
};
};
@@ -8,8 +8,8 @@ &electric_1 {
// in the base tree
hvac_1: hvac-medium-2 {
compatible = "ot,hvac-medium";
- heat-range = < 50 75 >;
- cool-range = < 60 80 >;
+ heat-range = <50 75>;
+ cool-range = <60 80>;
};
};
@@ -16,19 +16,19 @@ testcase-data-2 {
electric_1: substation@100 {
compatible = "ot,big-volts-control";
- reg = < 0x00000100 0x100 >;
+ reg = <0x00000100 0x100>;
status = "disabled";
hvac_1: hvac-medium-1 {
compatible = "ot,hvac-medium";
- heat-range = < 50 75 >;
- cool-range = < 60 80 >;
+ heat-range = <50 75>;
+ cool-range = <60 80>;
};
spin_ctrl_1: motor-1 {
compatible = "ot,ferris-wheel-motor";
spin = "clockwise";
- rpm_avail = < 50 >;
+ rpm_avail = <50>;
};
spin_ctrl_2: motor-8 {
@@ -41,27 +41,27 @@ rides_1: fairway-1 {
#size-cells = <1>;
compatible = "ot,rides";
status = "disabled";
- orientation = < 127 >;
+ orientation = <127>;
ride@100 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ot,roller-coaster";
- reg = < 0x00000100 0x100 >;
- hvac-provider = < &hvac_1 >;
- hvac-thermostat = < 29 > ;
- hvac-zones = < 14 >;
+ reg = <0x00000100 0x100>;
+ hvac-provider = <&hvac_1>;
+ hvac-thermostat = <29> ;
+ hvac-zones = <14>;
hvac-zone-names = "operator";
- spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
+ spin-controller = <&spin_ctrl_2 5 &spin_ctrl_2 7>;
spin-controller-names = "track_1", "track_2";
- queues = < 2 >;
+ queues = <2>;
track@30 {
- reg = < 0x00000030 0x10 >;
+ reg = <0x00000030 0x10>;
};
track@40 {
- reg = < 0x00000040 0x10 >;
+ reg = <0x00000040 0x10>;
};
};
@@ -69,19 +69,19 @@ track@40 {
lights_1: lights@30000 {
compatible = "ot,work-lights";
- reg = < 0x00030000 0x1000 >;
+ reg = <0x00030000 0x1000>;
status = "disabled";
};
lights_2: lights@40000 {
compatible = "ot,show-lights";
- reg = < 0x00040000 0x1000 >;
+ reg = <0x00040000 0x1000>;
status = "disabled";
- rate = < 13 138 >;
+ rate = <13 138>;
};
retail_1: vending@50000 {
- reg = < 0x00050000 0x1000 >;
+ reg = <0x00050000 0x1000>;
compatible = "ot,tickets";
status = "disabled";
};
No space after opening or before closing angular bracket. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/of/unittest-data/overlay.dtso | 30 ++++++++-------- .../overlay_bad_add_dup_node.dtso | 4 +-- .../overlay_bad_add_dup_prop.dtso | 4 +-- .../of/unittest-data/overlay_bad_phandle.dtso | 4 +-- .../of/unittest-data/overlay_bad_symbol.dtso | 4 +-- drivers/of/unittest-data/overlay_common.dtsi | 34 +++++++++---------- 6 files changed, 40 insertions(+), 40 deletions(-)