diff --git a/tools/Module.mk b/tools/Module.mk
index fba7dfe..6421a23 100644
--- a/tools/Module.mk
+++ b/tools/Module.mk
@@ -18,7 +18,7 @@ else
 TOOLS_LDFLAGS	:= -L$(LIB_DIR) -li2c
 endif
 
-TOOLS_TARGETS	:= i2cdetect i2cdump i2cset i2cget
+TOOLS_TARGETS	:= i2cdetect i2cdump i2cset i2cget i2ctransfer
 
 #
 # Programs
@@ -36,6 +36,9 @@ $(TOOLS_DIR)/i2cset: $(TOOLS_DIR)/i2cset.o $(TOOLS_DIR)/i2cbusses.o $(TOOLS_DIR)
 $(TOOLS_DIR)/i2cget: $(TOOLS_DIR)/i2cget.o $(TOOLS_DIR)/i2cbusses.o $(TOOLS_DIR)/util.o
 	$(CC) $(LDFLAGS) -o $@ $^ $(TOOLS_LDFLAGS)
 
+$(TOOLS_DIR)/i2ctransfer: $(TOOLS_DIR)/i2ctransfer.o $(TOOLS_DIR)/i2cbusses.o $(TOOLS_DIR)/util.o
+	$(CC) $(LDFLAGS) -o $@ $^ $(TOOLS_LDFLAGS)
+
 #
 # Objects
 #
@@ -52,6 +55,9 @@ $(TOOLS_DIR)/i2cset.o: $(TOOLS_DIR)/i2cset.c $(TOOLS_DIR)/i2cbusses.h $(TOOLS_DI
 $(TOOLS_DIR)/i2cget.o: $(TOOLS_DIR)/i2cget.c $(TOOLS_DIR)/i2cbusses.h $(TOOLS_DIR)/util.h version.h $(INCLUDE_DIR)/i2c/smbus.h
 	$(CC) $(CFLAGS) $(TOOLS_CFLAGS) -c $< -o $@
 
+$(TOOLS_DIR)/i2ctransfer.o: $(TOOLS_DIR)/i2ctransfer.c $(TOOLS_DIR)/i2cbusses.h $(TOOLS_DIR)/util.h version.h
+	$(CC) $(CFLAGS) $(TOOLS_CFLAGS) -c $< -o $@
+
 $(TOOLS_DIR)/i2cbusses.o: $(TOOLS_DIR)/i2cbusses.c $(TOOLS_DIR)/i2cbusses.h
 	$(CC) $(CFLAGS) $(TOOLS_CFLAGS) -c $< -o $@
 
diff --git a/tools/i2ctransfer.8 b/tools/i2ctransfer.8
new file mode 100644
index 0000000..28b3388
--- /dev/null
+++ b/tools/i2ctransfer.8
@@ -0,0 +1,159 @@
+.TH i2ctransfer 8 "February 2017"
+.SH "NAME"
+i2ctransfer \- send user-defined I2C messages in one transfer
+
+.SH SYNOPSIS
+.B i2ctransfer
+.RB [ -f ]
+.RB [ -y ]
+.RB [ -v ]
+.I i2cbus desc
+.RI [ data ]
+.RI [ desc
+.RI [ data ]]
+.RI ...
+.br
+.B i2ctransfer
+.B -V
+
+.SH DESCRIPTION
+.B i2ctransfer
+is a program to create I2C messages and send them combined as one transfer.
+For read messages, the contents of the received buffers are printed to stdout, one line per read message.
+.br
+Please note the difference between a
+.I transfer
+and a
+.I message
+here.
+A transfer may consist of multiple messages and is started with a START condition and ends with a STOP condition as described in the I2C specification.
+Messages within the transfer are concatenated using the REPEATED START condition which is described there as well.
+There are some advantages of having multiple messages in one transfer.
+First, some devices keep their internal states for REPEATED START but reset them after a STOP.
+Second, you cannot get interrupted during one transfer, but it might happen between multiple transfers.
+Interruption could happen on hardware level by another I2C master on the bus, or at software level by another I2C user who got its transfer scheduled between yours.
+This program helps you to create proper transfers for your needs.
+
+.SH OPTIONS
+.TP
+.B -f
+Force access to the device even if it is already busy.
+By default,
+.B i2ctransfer
+will refuse to access addresses marked as reserved by the I2C standard or to a device which is already under the control of a kernel driver.
+Using this flag is dangerous, it can seriously confuse the kernel driver in question.
+It can also cause
+.B i2ctransfer
+to silently write to the wrong register.
+So use at your own risk and only if you know what you're doing.
+.TP
+.B -y
+Disable interactive mode.
+By default,
+.B i2ctransfer
+will wait for a confirmation from the user before messing with the I2C bus.
+When this flag is used, it will perform the operation directly.
+This is mainly meant to be used in scripts.
+.TP
+.B -v
+Enable verbose output.
+It will print infos about all messages sent, i.e. not only for read messages but also for write messages.
+.TP
+.B -V
+Display the version and exit.
+
+.SH ARGUMENTS
+.PP
+The first parameter
+.I i2cbus
+indicates the number or name of the I2C bus to be used.
+This number should correspond to one of the busses listed by
+.B i2cdetect -l.
+
+.PP
+The next parameter is one or multiple
+.I desc
+blocks.
+The number of blocks is limited by the Linux Kernel and defined in I2C_RDWR_IOCTL_MAX_MSGS (42 as of v4.10).
+.I desc
+blocks are composed like this:
+
+.I {r|w}<length_of_message>[@address]
+
+.TP
+.B {r|w}
+specifies if the message is read or write
+.TP
+.B <length_of_message>
+specifies the number of bytes read or written in this message.
+It is parsed as an unsigned 16 bit integer, but note that the Linux Kernel apply an additional upper limit (8192 as of v4.10).
+.TP
+.B [@address]
+specifies the 7-bit address of the chip to be accessed for this message, and is an integer.
+If omitted, reuse the previous address.
+Normally, addresses outside the range of 0x03-0x77 and addresses with a kernel driver attached to them will be blocked.
+With
+.I -f
+(force), all addresses can be used.
+Be very careful when using that!
+10-bit addresses are currently not supported at all.
+
+.PP
+If the I2C message is a write, then a
+.I data
+block with the data to be written follows.
+It consists of
+.I <length_of_message>
+bytes which can be marked with the usual prefixes for hexadecimal, octal, etc.
+To make it easier to create larger data blocks easily, the data byte can have a suffix.
+
+.TP
+=
+keep value constant until end of message (i.e. 0= means 0, 0, 0, ...)
+.TP
++
+increase value by 1 until end of message (i.e. 0+ means 0, 1, 2, ...)
+.TP
+-
+decrease value by 1 until end of message (i.e. 0xff- means 0xff, 0xfe, 0xfd, ...)
+.TP
+p
+use value as seed for an 8 bit pseudo random sequence (i.e. 0p means 0x00, 0x50, 0xb0, ...)
+
+.SH EXAMPLES
+.PP
+On bus 0, from an EEPROM at address 0x50, read 8 byte from offset 0x64
+(first message writes one byte to set the memory pointer to 0x64, second message reads from the same chip):
+.nf
+.RS
+# i2ctransfer 0 w1@0x50 0x64 r8
+.RE
+.fi
+.PP
+For the same EEPROM, at offset 0x42 write 0xff 0xfe ... 0xf0
+(one write message; first byte sets the memory pointer to 0x42, 0xff is the first data byte, all following data bytes are decreased by one):
+.nf
+.RS
+# i2ctransfer 0 w17@0x50 0x42 0xff-
+.RE
+.fi
+
+.SH WARNING
+.B i2ctransfer
+can be extremely dangerous if used improperly.
+It can confuse your I2C bus, cause data loss, or have more serious side effects.
+Writing to a serial EEPROM on a memory DIMM (chip addresses between 0x50 and 0x57) may DESTROY your memory, leaving your system unbootable!
+Be extremely careful using this program.
+
+.SH AUTHORS
+Wolfram Sang, based on
+.B i2cget
+by Jean Delvare
+
+This manual page was originally written by Wolfram Sang based on the manual
+for
+.B i2cset
+by David Z Maze <dmaze@debian.org>.
+
+.SH SEE ALSO
+.BR i2cdetect (8), i2cdump (8), i2cget (8), i2cset (8)
diff --git a/tools/i2ctransfer.c b/tools/i2ctransfer.c
new file mode 100644
index 0000000..0f7ddd5
--- /dev/null
+++ b/tools/i2ctransfer.c
@@ -0,0 +1,338 @@
+/*
+    i2ctransfer.c - A user-space program to send concatenated i2c messages
+    Copyright (C) 2015-17 Wolfram Sang <wsa@sang-engineering.com>
+    Copyright (C) 2015-17 Renesas Electronics Corporation
+
+    Based on i2cget.c:
+    Copyright (C) 2005-2012  Jean Delvare <jdelvare@suse.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+#include <sys/ioctl.h>
+#include <errno.h>
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+#include "i2cbusses.h"
+#include "util.h"
+#include "../version.h"
+
+enum parse_state {
+	PARSE_GET_DESC,
+	PARSE_GET_DATA,
+};
+
+#define PRINT_STDERR	(1 << 0)
+#define PRINT_READ_BUF	(1 << 1)
+#define PRINT_WRITE_BUF	(1 << 2)
+#define PRINT_HEADER	(1 << 3)
+
+static void help(void)
+{
+	fprintf(stderr,
+		"Usage: i2ctransfer [-f] [-y] [-v] [-V] I2CBUS DESC [DATA] [DESC [DATA]]...\n"
+		"  I2CBUS is an integer or an I2C bus name\n"
+		"  DESC describes the transfer in the form: {r|w}LENGTH[@address]\n"
+		"    1) read/write-flag 2) LENGTH (range 0-65535) 3) I2C address (use last one if omitted)\n"
+		"  DATA are LENGTH bytes for a write message. They can be shortened by a suffix:\n"
+		"    = (keep value constant until LENGTH)\n"
+		"    + (increase value by 1 until LENGTH)\n"
+		"    - (decrease value by 1 until LENGTH)\n"
+		"    p (use pseudo random generator until LENGTH with value as seed)\n\n"
+		"Example (bus 0, read 8 byte at offset 0x64 from EEPROM at 0x50):\n"
+		"  # i2ctransfer 0 w1@0x50 0x64 r8\n"
+		"Example (same EEPROM, at offset 0x42 write 0xff 0xfe ... 0xf0):\n"
+		"  # i2ctransfer 0 w17@0x50 0x42 0xff-\n");
+}
+
+static int check_funcs(int file)
+{
+	unsigned long funcs;
+
+	/* check adapter functionality */
+	if (ioctl(file, I2C_FUNCS, &funcs) < 0) {
+		fprintf(stderr, "Error: Could not get the adapter "
+			"functionality matrix: %s\n", strerror(errno));
+		return -1;
+	}
+
+	if (!(funcs & I2C_FUNC_I2C)) {
+		fprintf(stderr, MISSING_FUNC_FMT, "I2C transfers");
+		return -1;
+	}
+
+	return 0;
+}
+
+static void print_msgs(struct i2c_msg *msgs, __u32 nmsgs, unsigned flags)
+{
+	FILE *output = flags & PRINT_STDERR ? stderr : stdout;
+	unsigned i;
+	__u16 j;
+
+	for (i = 0; i < nmsgs; i++) {
+		int read = msgs[i].flags & I2C_M_RD;
+		int print_buf = (read && (flags & PRINT_READ_BUF)) ||
+				(!read && (flags & PRINT_WRITE_BUF));
+
+		if (flags & PRINT_HEADER)
+			fprintf(output, "msg %u: addr 0x%02x, %s, len %u",
+				i, msgs[i].addr, read ? "read" : "write", msgs[i].len);
+
+		if (msgs[i].len && print_buf) {
+			if (flags & PRINT_HEADER)
+				fprintf(output, ", buf ");
+			for (j = 0; j < msgs[i].len - 1; j++)
+				fprintf(output, "0x%02x ", msgs[i].buf[j]);
+			/* Print final byte with newline */
+			fprintf(output, "0x%02x\n", msgs[i].buf[j]);
+		} else if (flags & PRINT_HEADER) {
+			fprintf(output, "\n");
+		}
+	}
+}
+
+static int confirm(const char *filename, struct i2c_msg *msgs, __u32 nmsgs)
+{
+	fprintf(stderr, "WARNING! This program can confuse your I2C bus, cause data loss and worse!\n");
+	fprintf(stderr, "I will send the following messages to device file %s:\n", filename);
+	print_msgs(msgs, nmsgs, PRINT_STDERR | PRINT_HEADER | PRINT_WRITE_BUF);
+
+	fprintf(stderr, "Continue? [y/N] ");
+	fflush(stderr);
+	if (!user_ack(0)) {
+		fprintf(stderr, "Aborting on user request.\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+int main(int argc, char *argv[])
+{
+	char filename[20];
+	int i2cbus, address = -1, file, arg_idx = 1, nmsgs = 0, nmsgs_sent, i;
+	int force = 0, yes = 0, version = 0, verbose = 0;
+	struct i2c_msg msgs[I2C_RDRW_IOCTL_MAX_MSGS];
+	enum parse_state state = PARSE_GET_DESC;
+	unsigned buf_idx = 0;
+
+	for (i = 0; i < I2C_RDRW_IOCTL_MAX_MSGS; i++)
+		msgs[i].buf = NULL;
+
+	/* handle (optional) arg_idx first */
+	while (arg_idx < argc && argv[arg_idx][0] == '-') {
+		switch (argv[arg_idx][1]) {
+		case 'V': version = 1; break;
+		case 'v': verbose = 1; break;
+		case 'f': force = 1; break;
+		case 'y': yes = 1; break;
+		default:
+			fprintf(stderr, "Error: Unsupported option "
+				"\"%s\"!\n", argv[arg_idx]);
+			help();
+			exit(1);
+		}
+		arg_idx++;
+	}
+
+	if (version) {
+		fprintf(stderr, "i2ctransfer version %s\n", VERSION);
+		exit(0);
+	}
+
+	if (arg_idx == argc) {
+		help();
+		exit(1);
+	}
+
+	i2cbus = lookup_i2c_bus(argv[arg_idx++]);
+	if (i2cbus < 0)
+		exit(1);
+
+	file = open_i2c_dev(i2cbus, filename, sizeof(filename), 0);
+	if (file < 0 || check_funcs(file))
+		exit(1);
+
+	while (arg_idx < argc) {
+		char *arg_ptr = argv[arg_idx];
+		unsigned long len, raw_data;
+		__u16 flags;
+		__u8 data, *buf;
+		char *end;
+
+		if (nmsgs > I2C_RDRW_IOCTL_MAX_MSGS) {
+			fprintf(stderr, "Error: Too many messages (max: %d)\n",
+				I2C_RDRW_IOCTL_MAX_MSGS);
+			goto err_out;
+		}
+
+		switch (state) {
+		case PARSE_GET_DESC:
+			flags = 0;
+
+			switch (*arg_ptr++) {
+			case 'r': flags |= I2C_M_RD; break;
+			case 'w': break;
+			default:
+				fprintf(stderr, "Error: Invalid direction\n");
+				goto err_out_with_arg;
+			}
+
+			len = strtoul(arg_ptr, &end, 0);
+			if (len > 0xffff || arg_ptr == end) {
+				fprintf(stderr, "Error: Length invalid\n");
+				goto err_out_with_arg;
+			}
+
+			arg_ptr = end;
+			if (*arg_ptr) {
+				int whole_range_ok;
+
+				if (*arg_ptr++ != '@') {
+					fprintf(stderr, "Error: Unknown seperator after length\n");
+					goto err_out_with_arg;
+				}
+
+				/* We skip 10-bit support for now. If we want it,
+				 * it should be marked with a 't' flag before
+				 * the address here.
+				 */
+
+				address = parse_i2c_address(arg_ptr);
+				/* With 'force', allow whole address range */
+				whole_range_ok = force && address == -2;
+				if (address < 0 && !whole_range_ok)
+					goto err_out_with_arg;
+
+				/* Ensure address is not busy */
+				if (!force && set_slave_addr(file, address, 0))
+					goto err_out_with_arg;
+
+			} else {
+				/* Reuse last address if possible */
+				if (address < 0) {
+					fprintf(stderr, "Error: No address given\n");
+					goto err_out_with_arg;
+				}
+			}
+
+			msgs[nmsgs].addr = address;
+			msgs[nmsgs].flags = flags;
+			msgs[nmsgs].len = len;
+
+			if (len) {
+				buf = malloc(len);
+				if (!buf) {
+					fprintf(stderr, "Error: No memory for buffer\n");
+					goto err_out_with_arg;
+				}
+				memset(buf, 0, len);
+				msgs[nmsgs].buf = buf;
+			}
+
+			if (flags & I2C_M_RD || len == 0) {
+				nmsgs++;
+			} else {
+				buf_idx = 0;
+				state = PARSE_GET_DATA;
+			}
+
+			break;
+
+		case PARSE_GET_DATA:
+			raw_data = strtoul(arg_ptr, &end, 0);
+			if (raw_data > 0xff || arg_ptr == end) {
+				fprintf(stderr, "Error: Invalid data byte\n");
+				goto err_out_with_arg;
+			}
+			data = raw_data;
+			len = msgs[nmsgs].len;
+
+			while (buf_idx < len) {
+				msgs[nmsgs].buf[buf_idx++] = data;
+
+				if (!*end)
+					break;
+
+				switch (*end) {
+				/* Pseudo randomness (8 bit AXR with a=13 and b=27) */
+				case 'p':
+					data = (data ^ 27) + 13;
+					data = (data << 1) | (data >> 7);
+					break;
+				case '+': data++; break;
+				case '-': data--; break;
+				case '=': break;
+				default:
+					fprintf(stderr, "Error: Invalid data byte suffix\n");
+					goto err_out_with_arg;
+				}
+			}
+
+			if (buf_idx == len) {
+				nmsgs++;
+				state = PARSE_GET_DESC;
+			}
+
+			break;
+
+		default:
+			/* Should never happen */
+			fprintf(stderr, "Internal Error: Unkown state in state machine!\n");
+			goto err_out;
+		}
+
+		arg_idx++;
+	}
+
+	if (state != PARSE_GET_DESC || nmsgs == 0) {
+		fprintf(stderr, "Error: Incomplete message\n");
+		goto err_out;
+	}
+
+	if (yes || confirm(filename, msgs, nmsgs)) {
+		struct i2c_rdwr_ioctl_data rdwr;
+
+		rdwr.msgs = msgs;
+		rdwr.nmsgs = nmsgs;
+		nmsgs_sent = ioctl(file, I2C_RDWR, &rdwr);
+		if (nmsgs_sent < 0) {
+			fprintf(stderr, "Error: Sending messages failed: %s\n", strerror(errno));
+			goto err_out;
+		} else if (nmsgs_sent < nmsgs) {
+			fprintf(stderr, "Warning: only %d/%d messages were sent\n", nmsgs_sent, nmsgs);
+		}
+
+		print_msgs(msgs, nmsgs_sent, PRINT_READ_BUF | (verbose ? PRINT_HEADER | PRINT_WRITE_BUF : 0));
+	}
+
+	close(file);
+
+	for (i = 0; i < nmsgs; i++)
+		free(msgs[i].buf);
+
+	exit(0);
+
+ err_out_with_arg:
+	fprintf(stderr, "Error: faulty argument is '%s'\n", argv[arg_idx]);
+ err_out:
+	close(file);
+
+	for (i = 0; i <= nmsgs; i++)
+		free(msgs[i].buf);
+
+	exit(1);
+}
