@@ -10917,6 +10917,17 @@ L: linux-serial@vger.kernel.org
S: Odd Fixes
F: drivers/tty/serial/rp2.*
+ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS
+M: Marek Vasut <marek.vasut+renesas@gmail.com>
+L: linux-kernel@vger.kernel.org
+L: linux-renesas-soc@vger.kernel.org
+S: Supported
+F: drivers/mfd/bd9571mwv.c
+F: drivers/regulator/bd9571mwv-regulator.c
+F: drivers/gpio/gpio-bd9571mwv.c
+F: include/linux/mfd/bd9571mwv.h
+F: Documentation/devicetree/bindings/mfd/bd9571mwv.txt
+
ROSE NETWORK LAYER
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-hams@vger.kernel.org
@@ -133,6 +133,19 @@ config MFD_BCM590XX
help
Support for the BCM590xx PMUs from Broadcom
+config MFD_BD9571MWV
+ tristate "ROHM BD9571MWV PMIC"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C
+ help
+ Support for the ROHM BD9571MWV PMIC, which contains single
+ voltage regulator, voltage sampling units, GPIO block and
+ watchdog block.
+
+ This driver can also be built as a module. If so, the module
+ will be called bd9571mwv.
+
config MFD_AC100
tristate "X-Powers AC100"
select MFD_CORE
@@ -10,6 +10,7 @@ obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
+obj-$(CONFIG_MFD_BD9571MWV) += bd9571mwv.o
cros_ec_core-objs := cros_ec.o
cros_ec_core-$(CONFIG_ACPI) += cros_ec_acpi_gpe.o
obj-$(CONFIG_MFD_CROS_EC) += cros_ec_core.o
new file mode 100644
@@ -0,0 +1,230 @@
+/*
+ * ROHM BD9571MWV-M MFD driver
+ *
+ * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65086 driver
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+
+#include <linux/mfd/bd9571mwv.h>
+
+static const struct mfd_cell bd9571mwv_cells[] = {
+ { .name = "bd9571mwv-regulator", },
+ { .name = "bd9571mwv-gpio", },
+};
+
+static const struct regmap_range bd9571mwv_readable_yes_ranges[] = {
+ regmap_reg_range(BD9571MWV_VENDOR_CODE, BD9571MWV_PRODUCT_REVISION),
+ regmap_reg_range(BD9571MWV_AVS_SET_MONI, BD9571MWV_AVS_DVFS_VID(3)),
+ regmap_reg_range(BD9571MWV_VD18_VID, BD9571MWV_VD33_VID),
+ regmap_reg_range(BD9571MWV_DVFS_VINIT, BD9571MWV_DVFS_VINIT),
+ regmap_reg_range(BD9571MWV_DVFS_SETVMAX, BD9571MWV_DVFS_MONIVDAC),
+ regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
+ regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INTMASK),
+ regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK),
+};
+
+static const struct regmap_access_table bd9571mwv_readable_table = {
+ .yes_ranges = bd9571mwv_readable_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd9571mwv_readable_yes_ranges),
+};
+
+static const struct regmap_range bd9571mwv_writable_yes_ranges[] = {
+ regmap_reg_range(BD9571MWV_AVS_VD09_VID(0), BD9571MWV_AVS_VD09_VID(3)),
+ regmap_reg_range(BD9571MWV_DVFS_SETVID, BD9571MWV_DVFS_SETVID),
+ regmap_reg_range(BD9571MWV_GPIO_DIR, BD9571MWV_GPIO_OUT),
+ regmap_reg_range(BD9571MWV_GPIO_INT_SET, BD9571MWV_GPIO_INTMASK),
+ regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK),
+};
+
+static const struct regmap_access_table bd9571mwv_writable_table = {
+ .yes_ranges = bd9571mwv_writable_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd9571mwv_writable_yes_ranges),
+};
+
+static const struct regmap_range bd9571mwv_volatile_yes_ranges[] = {
+ regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
+ regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INT),
+ regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTREQ),
+};
+
+static const struct regmap_access_table bd9571mwv_volatile_table = {
+ .yes_ranges = bd9571mwv_volatile_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd9571mwv_volatile_yes_ranges),
+};
+
+static const struct regmap_config bd9571mwv_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .rd_table = &bd9571mwv_readable_table,
+ .wr_table = &bd9571mwv_writable_table,
+ .volatile_table = &bd9571mwv_volatile_table,
+ .max_register = 0xff,
+};
+
+static const struct regmap_irq bd9571mwv_irqs[] = {
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_MD1, 0,
+ BD9571MWV_INT_INTREQ_MD1_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_MD2_E1, 0,
+ BD9571MWV_INT_INTREQ_MD2_E1_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_MD2_E2, 0,
+ BD9571MWV_INT_INTREQ_MD2_E2_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_PROT_ERR, 0,
+ BD9571MWV_INT_INTREQ_PROT_ERR_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_GP, 0,
+ BD9571MWV_INT_INTREQ_GP_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_128H_OF, 0,
+ BD9571MWV_INT_INTREQ_128H_OF_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_WDT_OF, 0,
+ BD9571MWV_INT_INTREQ_WDT_OF_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_BKUP_TRG, 0,
+ BD9571MWV_INT_INTREQ_BKUP_TRG_INT),
+};
+
+static struct regmap_irq_chip bd9571mwv_irq_chip = {
+ .name = "bd9571mwv",
+ .status_base = BD9571MWV_INT_INTREQ,
+ .mask_base = BD9571MWV_INT_INTMASK,
+ .ack_base = BD9571MWV_INT_INTREQ,
+ .init_ack_masked = true,
+ .num_regs = 1,
+ .irqs = bd9571mwv_irqs,
+ .num_irqs = ARRAY_SIZE(bd9571mwv_irqs),
+};
+
+static int bd9571mwv_identify(struct bd9571mwv *bd)
+{
+ struct device *dev = bd->dev;
+ unsigned int value;
+ int ret;
+
+ ret = regmap_read(bd->regmap, BD9571MWV_VENDOR_CODE, &value);
+ if (ret) {
+ dev_err(dev, "Failed to read vendor code register (ret=%i)\n",
+ ret);
+ return ret;
+ }
+
+ if (value != BD9571MWV_VENDOR_CODE_VAL) {
+ dev_err(dev, "Invalid vendor code ID %02x (expected %02x)\n",
+ value, BD9571MWV_VENDOR_CODE_VAL);
+ return -EINVAL;
+ }
+
+ ret = regmap_read(bd->regmap, BD9571MWV_PRODUCT_CODE, &value);
+ if (ret) {
+ dev_err(dev, "Failed to read product code register (ret=%i)\n",
+ ret);
+ return ret;
+ }
+
+ if (value != BD9571MWV_PRODUCT_CODE_VAL) {
+ dev_err(dev, "Invalid product code ID %02x (expected %02x)\n",
+ value, BD9571MWV_PRODUCT_CODE_VAL);
+ return -EINVAL;
+ }
+
+ ret = regmap_read(bd->regmap, BD9571MWV_PRODUCT_REVISION, &value);
+ if (ret) {
+ dev_err(dev, "Failed to read revision register (ret=%i)\n",
+ ret);
+ return ret;
+ }
+
+ dev_info(dev, "Device: BD9571MWV rev. %d\n", value & 0xff);
+
+ return 0;
+}
+
+static int bd9571mwv_probe(struct i2c_client *client,
+ const struct i2c_device_id *ids)
+{
+ struct bd9571mwv *bd;
+ int ret;
+
+ bd = devm_kzalloc(&client->dev, sizeof(*bd), GFP_KERNEL);
+ if (!bd)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, bd);
+ bd->dev = &client->dev;
+ bd->irq = client->irq;
+
+ bd->regmap = devm_regmap_init_i2c(client, &bd9571mwv_regmap_config);
+ if (IS_ERR(bd->regmap)) {
+ dev_err(bd->dev, "Failed to initialize register map\n");
+ return PTR_ERR(bd->regmap);
+ }
+
+ ret = bd9571mwv_identify(bd);
+ if (ret)
+ return ret;
+
+ ret = regmap_add_irq_chip(bd->regmap, bd->irq, IRQF_ONESHOT, 0,
+ &bd9571mwv_irq_chip, &bd->irq_data);
+ if (ret) {
+ dev_err(bd->dev, "Failed to register IRQ chip\n");
+ return ret;
+ }
+
+ ret = mfd_add_devices(bd->dev, PLATFORM_DEVID_AUTO, bd9571mwv_cells,
+ ARRAY_SIZE(bd9571mwv_cells), NULL, 0,
+ regmap_irq_get_domain(bd->irq_data));
+ if (ret) {
+ regmap_del_irq_chip(bd->irq, bd->irq_data);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bd9571mwv_remove(struct i2c_client *client)
+{
+ struct bd9571mwv *bd = i2c_get_clientdata(client);
+
+ regmap_del_irq_chip(bd->irq, bd->irq_data);
+
+ return 0;
+}
+
+static const struct of_device_id bd9571mwv_of_match_table[] = {
+ { .compatible = "rohm,bd9571mwv", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bd9571mwv_of_match_table);
+
+static const struct i2c_device_id bd9571mwv_id_table[] = {
+ { "bd9571mwv", 0 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, bd9571mwv_id_table);
+
+static struct i2c_driver bd9571mwv_driver = {
+ .driver = {
+ .name = "bd9571mwv",
+ .of_match_table = bd9571mwv_of_match_table,
+ },
+ .probe = bd9571mwv_probe,
+ .remove = bd9571mwv_remove,
+ .id_table = bd9571mwv_id_table,
+};
+module_i2c_driver(bd9571mwv_driver);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut+renesas@gmail.com>");
+MODULE_DESCRIPTION("BD9571MWV PMIC Driver");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,115 @@
+/*
+ * ROHM BD9571MWV-M driver
+ *
+ * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65086 driver
+ */
+
+#ifndef __LINUX_MFD_BD9571MWV_H
+#define __LINUX_MFD_BD9571MWV_H
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+/* List of registers for BD9571MWV */
+#define BD9571MWV_VENDOR_CODE 0x00
+#define BD9571MWV_VENDOR_CODE_VAL 0xdb
+#define BD9571MWV_PRODUCT_CODE 0x01
+#define BD9571MWV_PRODUCT_CODE_VAL 0x60
+#define BD9571MWV_PRODUCT_REVISION 0x02
+
+#define BD9571MWV_I2C_FUSA_MODE 0x10
+#define BD9571MWV_I2C_MD2_E1_BIT_1 0x11
+#define BD9571MWV_I2C_MD2_E1_BIT_2 0x12
+
+#define BD9571MWV_BKUP_MODE_CNT 0x20
+#define BD9571MWV_BKUP_MODE_STATUS 0x21
+#define BD9571MWV_BKUP_RECOVERY_CNT 0x22
+#define BD9571MWV_BKUP_CTRL_TIM_CNT 0x23
+#define BD9571MWV_WAITBKUP_WDT_CNT 0x24
+#define BD9571MWV_128H_TIM_CNT 0x26
+#define BD9571MWV_QLLM_CNT 0x27
+
+#define BD9571MWV_AVS_SET_MONI 0x31
+#define BD9571MWV_AVS_SET_MONI_MASK 0x3
+#define BD9571MWV_AVS_VD09_VID(n) (0x32 + (n))
+#define BD9571MWV_AVS_DVFS_VID(n) (0x36 + (n))
+
+#define BD9571MWV_VD18_VID 0x42
+#define BD9571MWV_VD25_VID 0x43
+#define BD9571MWV_VD33_VID 0x44
+
+#define BD9571MWV_DVFS_VINIT 0x50
+#define BD9571MWV_DVFS_SETVMAX 0x52
+#define BD9571MWV_DVFS_BOOSTVID 0x53
+#define BD9571MWV_DVFS_SETVID 0x54
+#define BD9571MWV_DVFS_MONIVDAC 0x55
+#define BD9571MWV_DVFS_PGD_CNT 0x56
+
+#define BD9571MWV_GPIO_DIR 0x60
+#define BD9571MWV_GPIO_OUT 0x61
+#define BD9571MWV_GPIO_IN 0x62
+#define BD9571MWV_GPIO_DEB 0x63
+#define BD9571MWV_GPIO_INT_SET 0x64
+#define BD9571MWV_GPIO_INT 0x65
+#define BD9571MWV_GPIO_INTMASK 0x66
+
+#define BD9571MWV_REG_KEEP(n) (0x70 + (n))
+
+#define BD9571MWV_PMIC_INTERNAL_STATUS 0x80
+#define BD9571MWV_PROT_ERROR_STATUS0 0x81
+#define BD9571MWV_PROT_ERROR_STATUS1 0x82
+#define BD9571MWV_PROT_ERROR_STATUS2 0x83
+#define BD9571MWV_PROT_ERROR_STATUS3 0x84
+#define BD9571MWV_PROT_ERROR_STATUS4 0x85
+
+#define BD9571MWV_INT_INTREQ 0x90
+#define BD9571MWV_INT_INTREQ_MD1_INT BIT(0)
+#define BD9571MWV_INT_INTREQ_MD2_E1_INT BIT(1)
+#define BD9571MWV_INT_INTREQ_MD2_E2_INT BIT(2)
+#define BD9571MWV_INT_INTREQ_PROT_ERR_INT BIT(3)
+#define BD9571MWV_INT_INTREQ_GP_INT BIT(4)
+#define BD9571MWV_INT_INTREQ_128H_OF_INT BIT(5)
+#define BD9571MWV_INT_INTREQ_WDT_OF_INT BIT(6)
+#define BD9571MWV_INT_INTREQ_BKUP_TRG_INT BIT(7)
+#define BD9571MWV_INT_INTMASK 0x91
+
+#define BD9571MWV_ACCESS_KEY 0xff
+
+/* Define the BD9571MWV IRQ numbers */
+enum bd9571mwv_irqs {
+ BD9571MWV_IRQ_MD1,
+ BD9571MWV_IRQ_MD2_E1,
+ BD9571MWV_IRQ_MD2_E2,
+ BD9571MWV_IRQ_PROT_ERR,
+ BD9571MWV_IRQ_GP,
+ BD9571MWV_IRQ_128H_OF,
+ BD9571MWV_IRQ_WDT_OF,
+ BD9571MWV_IRQ_BKUP_TRG,
+};
+
+/**
+ * struct bd9571mwv - state holder for the bd9571mwv driver
+ *
+ * Device data may be used to access the BD9571MWV chip
+ */
+struct bd9571mwv {
+ struct device *dev;
+ struct regmap *regmap;
+
+ /* IRQ Data */
+ int irq;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+#endif /* __LINUX_MFD_BD9571MWV_H */
Add the MFD part of the ROHM BD9571MWV-M PMIC driver and MAINTAINERS entry. The MFD part only specifies the regmap bits for the PMIC and binds the subdevs together. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Lee Jones <lee.jones@linaro.org> --- V2: - Change BD9571MWV_AVS_VD09_VID0,1,2,3 to BD9571MWV_AVS_VD09_VID(n) - Change BD9571MWV_AVS_DVFS_VID0,1,2,3 to BD9571MWV_AVS_DVFS_VID(n) - Make the AVS_VD09 range RW, so it can be used by the regulator driver for the VD09 regulator - Report the regmap read return values when attempting to read ID registers fails --- MAINTAINERS | 11 ++ drivers/mfd/Kconfig | 13 +++ drivers/mfd/Makefile | 1 + drivers/mfd/bd9571mwv.c | 230 ++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/bd9571mwv.h | 115 +++++++++++++++++++++ 5 files changed, 370 insertions(+) create mode 100644 drivers/mfd/bd9571mwv.c create mode 100644 include/linux/mfd/bd9571mwv.h