diff mbox

[4/4] arm: dts: rskrza1: Add LED0 pin support

Message ID 20170720182019.85075-5-chris.brandt@renesas.com (mailing list archive)
State Accepted
Commit a4604f4d245fe58aac3bc792296ef2e9ec774e12
Headers show

Commit Message

Chris Brandt July 20, 2017, 6:20 p.m. UTC 
Add pin configuration for LED0 which is connected to a GPIO.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
---
 arch/arm/boot/dts/r7s72100-rskrza1.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index f8285b951140..5dcaaf131d27 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -10,6 +10,7 @@ 
 
 /dts-v1/;
 #include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
 
 / {
@@ -34,6 +35,15 @@ 
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
+
+	leds {
+		status = "okay";
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&port7 1 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &extal_clk {