@@ -5,7 +5,7 @@
obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs.o
-renesas_usbhs-y := common.o mod.o pipe.o fifo.o rcar2.o rcar3.o
+renesas_usbhs-y := common.o mod.o pipe.o fifo.o rcar2.o rcar3.o rza.o
ifneq ($(CONFIG_USB_RENESAS_USBHS_HCD),)
renesas_usbhs-y += mod_host.o
@@ -17,6 +17,7 @@
#include "common.h"
#include "rcar2.h"
#include "rcar3.h"
+#include "rza.h"
/*
* image of renesas_usbhs
@@ -480,6 +481,10 @@ static const struct of_device_id usbhs_of_match[] = {
.compatible = "renesas,usbhs-r8a77995",
.data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL,
},
+ {
+ .compatible = "renesas,usbhs-r7s72100",
+ .data = (void *)USBHS_TYPE_RZA1,
+ },
{
.compatible = "renesas,rcar-gen2-usbhs",
.data = (void *)USBHS_TYPE_RCAR_GEN2,
@@ -488,6 +493,10 @@ static const struct of_device_id usbhs_of_match[] = {
.compatible = "renesas,rcar-gen3-usbhs",
.data = (void *)USBHS_TYPE_RCAR_GEN3,
},
+ {
+ .compatible = "renesas,rza1-usbhs",
+ .data = (void *)USBHS_TYPE_RZA1,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, usbhs_of_match);
@@ -520,6 +529,11 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
}
+ if (dparam->type == USBHS_TYPE_RZA1) {
+ dparam->pipe_configs = usbhsc_new_pipe;
+ dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
+ }
+
return info;
}
@@ -591,6 +605,9 @@ static int usbhs_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "no notifier registered\n");
}
break;
+ case USBHS_TYPE_RZA1:
+ priv->pfunc = usbhs_rza1_ops;
+ break;
default:
if (!info->platform_callback.get_id) {
dev_err(&pdev->dev, "no platform callbacks");
@@ -98,6 +98,7 @@ struct usbhs_priv;
#define D2FIFOCTR 0x00F2 /* for R-Car Gen2 */
#define D3FIFOSEL 0x00F4 /* for R-Car Gen2 */
#define D3FIFOCTR 0x00F6 /* for R-Car Gen2 */
+#define SUSPMODE 0x0102 /* for RZ/A */
/* SYSCFG */
#define SCKE (1 << 10) /* USB Module Clock Enable */
@@ -106,6 +107,8 @@ struct usbhs_priv;
#define DRPD (1 << 5) /* D+ Line/D- Line Resistance Control */
#define DPRPU (1 << 4) /* D+ Line Resistance Control */
#define USBE (1 << 0) /* USB Module Operation Enable */
+#define UCKSEL (1 << 2) /* Clock Select for RZ/A1 */
+#define UPLLE (1 << 1) /* USB PLL Enable for RZ/A1 */
/* DVSTCTR */
#define EXTLP (1 << 10) /* Controls the EXTLP pin output state */
@@ -233,6 +236,9 @@ struct usbhs_priv;
#define USBSPD_SPEED_FULL 0x2
#define USBSPD_SPEED_HIGH 0x3
+/* SUSPMODE */
+#define SUSPM (1 << 14) /* SuspendM Control */
+
/*
* struct
*/
new file mode 100644
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver RZ/A initialization and power control
+ *
+ * Copyright (C) 2018 Chris Brandt
+ * Copyright (C) 2018 Renesas Electronics Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include "common.h"
+#include "rza.h"
+
+static int usbhs_rza1_hardware_init(struct platform_device *pdev)
+{
+ struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+ struct device_node *usb_x1_clk, *extal_clk;
+ u32 freq_usb = 0, freq_extal = 0;
+
+ /* Input Clock Selection (NOTE: ch0 controls both ch0 and ch1) */
+ usb_x1_clk = of_find_node_by_name(NULL, "usb_x1");
+ extal_clk = of_find_node_by_name(NULL, "extal");
+ of_property_read_u32(usb_x1_clk, "clock-frequency", &freq_usb);
+ of_property_read_u32(extal_clk, "clock-frequency", &freq_extal);
+ if (freq_usb == 0) {
+ if (freq_extal == 12000000) {
+ /* Select 12MHz XTAL */
+ usbhs_bset(priv, SYSCFG, UCKSEL, UCKSEL);
+ } else {
+ dev_err(usbhs_priv_to_dev(priv), "A 48MHz USB clock or 12MHz main clock is required.\n");
+ return -EIO;
+ }
+ }
+
+ /* Enable USB PLL (NOTE: ch0 controls both ch0 and ch1) */
+ usbhs_bset(priv, SYSCFG, UPLLE, UPLLE);
+ udelay(1000);
+ usbhs_bset(priv, SUSPMODE, SUSPM, SUSPM);
+
+ return 0;
+}
+
+static int usbhs_rza_get_id(struct platform_device *pdev)
+{
+ return USBHS_GADGET;
+}
+
+const struct renesas_usbhs_platform_callback usbhs_rza1_ops = {
+ .hardware_init = usbhs_rza1_hardware_init,
+ .get_id = usbhs_rza_get_id,
+};
new file mode 100644
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "common.h"
+
+extern const struct renesas_usbhs_platform_callback usbhs_rza1_ops;
@@ -195,6 +195,7 @@ struct renesas_usbhs_driver_param {
#define USBHS_TYPE_RCAR_GEN2 1
#define USBHS_TYPE_RCAR_GEN3 2
#define USBHS_TYPE_RCAR_GEN3_WITH_PLL 3
+#define USBHS_TYPE_RZA1 4
/*
* option:
This patch adds the capability to support RZ/A1 SoCs. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> --- drivers/usb/renesas_usbhs/Makefile | 2 +- drivers/usb/renesas_usbhs/common.c | 17 +++++++++++++ drivers/usb/renesas_usbhs/common.h | 6 +++++ drivers/usb/renesas_usbhs/rza.c | 52 ++++++++++++++++++++++++++++++++++++++ drivers/usb/renesas_usbhs/rza.h | 4 +++ include/linux/usb/renesas_usbhs.h | 1 + 6 files changed, 81 insertions(+), 1 deletion(-) create mode 100644 drivers/usb/renesas_usbhs/rza.c create mode 100644 drivers/usb/renesas_usbhs/rza.h