@@ -142,7 +142,6 @@ static const struct pca953x_reg_config pca957x_regs = {
struct pca953x_chip {
unsigned gpio_start;
u8 reg_output[MAX_BANK];
- u8 reg_direction[MAX_BANK];
struct mutex i2c_lock;
struct regmap *regmap;
@@ -387,18 +386,13 @@ static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val)
static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
- u8 reg_val;
+ u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
+ true, false);
+ u8 bit = BIT(off % BANK_SZ);
int ret;
mutex_lock(&chip->i2c_lock);
- reg_val = chip->reg_direction[off / BANK_SZ] | (1u << (off % BANK_SZ));
-
- ret = pca953x_write_single(chip, chip->regs->direction, reg_val, off);
- if (ret)
- goto exit;
-
- chip->reg_direction[off / BANK_SZ] = reg_val;
-exit:
+ ret = regmap_write_bits(chip->regmap, dirreg, bit, bit);
mutex_unlock(&chip->i2c_lock);
return ret;
}
@@ -407,6 +401,9 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc,
unsigned off, int val)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
+ u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
+ true, false);
+ u8 bit = BIT(off % BANK_SZ);
u8 reg_val;
int ret;
@@ -426,12 +423,7 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc,
chip->reg_output[off / BANK_SZ] = reg_val;
/* then direction */
- reg_val = chip->reg_direction[off / BANK_SZ] & ~(1u << (off % BANK_SZ));
- ret = pca953x_write_single(chip, chip->regs->direction, reg_val, off);
- if (ret)
- goto exit;
-
- chip->reg_direction[off / BANK_SZ] = reg_val;
+ ret = regmap_write_bits(chip->regmap, dirreg, bit, 0);
exit:
mutex_unlock(&chip->i2c_lock);
return ret;
@@ -483,16 +475,19 @@ static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
+ u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
+ true, false);
+ u8 bit = BIT(off % BANK_SZ);
u32 reg_val;
int ret;
mutex_lock(&chip->i2c_lock);
- ret = pca953x_read_single(chip, chip->regs->direction, ®_val, off);
+ ret = regmap_read(chip->regmap, dirreg, ®_val);
mutex_unlock(&chip->i2c_lock);
if (ret < 0)
return ret;
- return !!(reg_val & (1u << (off % BANK_SZ)));
+ return !!(reg_val & bit);
}
static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
@@ -580,6 +575,10 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
u8 new_irqs;
int level, i;
u8 invert_irq_mask[MAX_BANK];
+ int reg_direction[MAX_BANK];
+
+ regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction,
+ NBANK(chip));
if (chip->driver_data & PCA_PCAL) {
/* Enable latch on interrupt-enabled inputs */
@@ -595,7 +594,7 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
/* Look for any newly setup interrupt */
for (i = 0; i < NBANK(chip); i++) {
new_irqs = chip->irq_trig_fall[i] | chip->irq_trig_raise[i];
- new_irqs &= ~chip->reg_direction[i];
+ new_irqs &= reg_direction[i];
while (new_irqs) {
level = __ffs(new_irqs);
@@ -660,6 +659,7 @@ static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
bool pending_seen = false;
bool trigger_seen = false;
u8 trigger[MAX_BANK];
+ int reg_direction[MAX_BANK];
int ret, i;
if (chip->driver_data & PCA_PCAL) {
@@ -690,8 +690,10 @@ static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
return false;
/* Remove output pins from the equation */
+ regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction,
+ NBANK(chip));
for (i = 0; i < NBANK(chip); i++)
- cur_stat[i] &= chip->reg_direction[i];
+ cur_stat[i] &= reg_direction[i];
memcpy(old_stat, chip->irq_stat, NBANK(chip));
@@ -745,6 +747,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
int irq_base)
{
struct i2c_client *client = chip->client;
+ int reg_direction[MAX_BANK];
int ret, i;
if (client->irq && irq_base != -1
@@ -759,8 +762,10 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
* interrupt. We have to rely on the previous read for
* this purpose.
*/
+ regmap_bulk_read(chip->regmap, chip->regs->direction,
+ reg_direction, NBANK(chip));
for (i = 0; i < NBANK(chip); i++)
- chip->irq_stat[i] &= chip->reg_direction[i];
+ chip->irq_stat[i] &= reg_direction[i];
mutex_init(&chip->irq_lock);
ret = devm_request_threaded_irq(&client->dev,
@@ -817,9 +822,9 @@ static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert)
if (ret)
goto out;
- ret = pca953x_read_regs(chip, chip->regs->direction,
- chip->reg_direction);
- if (ret)
+ ret = regcache_sync_region(chip->regmap, chip->regs->direction,
+ chip->regs->direction + NBANK(chip));
+ if (ret != 0)
goto out;
/* set platform specific polarity inversion */
@@ -937,6 +942,8 @@ static int pca953x_probe(struct i2c_client *client,
goto err_exit;
}
+ regcache_mark_dirty(chip->regmap);
+
mutex_init(&chip->i2c_lock);
/*
* In case we have an i2c-mux controlled by a GPIO provided by an
Replace the ad-hoc reg_direction direction register caching with generic regcache cache. This reduces code duplication. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- V2: Fix the IRQ handling code as well V3: No change --- drivers/gpio/gpio-pca953x.c | 55 +++++++++++++++++++++---------------- 1 file changed, 31 insertions(+), 24 deletions(-)