@@ -154,9 +154,6 @@ struct pca953x_chip {
struct regulator *regulator;
const struct pca953x_reg_config *regs;
-
- int (*write_regs)(struct pca953x_chip *, int, u8 *);
- int (*read_regs)(struct pca953x_chip *, int, u8 *);
};
static int pca953x_bank_shift(struct pca953x_chip *chip)
@@ -201,17 +198,13 @@ static int pca953x_write_single(struct pca953x_chip *chip, int reg, u32 val,
return 0;
}
-static int pca953x_write_regs_8(struct pca953x_chip *chip, int reg, u8 *val)
-{
- return i2c_smbus_write_byte_data(chip->client, reg, *val);
-}
-
-static int pca953x_write_regs_mul(struct pca953x_chip *chip, int reg, u8 *val)
+static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val)
{
int bank_shift = pca953x_bank_shift(chip);
int addr = (reg & PCAL_GPIO_MASK) << bank_shift;
int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1;
u8 regaddr = pinctrl | addr;
+ int ret;
/* Chips with 24 and more GPIOs always support Auto Increment */
if (NBANK(chip) > 2)
@@ -221,15 +214,8 @@ static int pca953x_write_regs_mul(struct pca953x_chip *chip, int reg, u8 *val)
if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE)
regaddr |= REG_ADDR_AI;
- return i2c_smbus_write_i2c_block_data(chip->client, regaddr,
- NBANK(chip), val);
-}
-
-static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val)
-{
- int ret = 0;
-
- ret = chip->write_regs(chip, reg, val);
+ ret = i2c_smbus_write_i2c_block_data(chip->client, regaddr,
+ NBANK(chip), val);
if (ret < 0) {
dev_err(&chip->client->dev, "failed writing register\n");
return ret;
@@ -238,36 +224,20 @@ static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val)
return 0;
}
-static int pca953x_read_regs_8(struct pca953x_chip *chip, int reg, u8 *val)
-{
- int ret;
-
- ret = i2c_smbus_read_byte_data(chip->client, reg);
- *val = ret;
-
- return ret;
-}
-
-static int pca953x_read_regs_mul(struct pca953x_chip *chip, int reg, u8 *val)
+static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val)
{
int bank_shift = pca953x_bank_shift(chip);
int addr = (reg & PCAL_GPIO_MASK) << bank_shift;
int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1;
u8 regaddr = pinctrl | addr;
+ int ret;
/* Chips with 24 and more GPIOs always support Auto Increment */
if (NBANK(chip) > 2)
regaddr |= REG_ADDR_AI;
- return i2c_smbus_read_i2c_block_data(chip->client, regaddr,
- NBANK(chip), val);
-}
-
-static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val)
-{
- int ret;
-
- ret = chip->read_regs(chip, reg, val);
+ ret = i2c_smbus_read_i2c_block_data(chip->client, regaddr,
+ NBANK(chip), val);
if (ret < 0) {
dev_err(&chip->client->dev, "failed reading register\n");
return ret;
@@ -872,14 +842,6 @@ static int pca953x_probe(struct i2c_client *client,
*/
pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
- if (chip->gpio_chip.ngpio <= 8) {
- chip->write_regs = pca953x_write_regs_8;
- chip->read_regs = pca953x_read_regs_8;
- } else {
- chip->write_regs = pca953x_write_regs_mul;
- chip->read_regs = pca953x_read_regs_mul;
- }
-
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE)
ret = device_pca953x_init(chip, invert);
else
At this point, the pca953x_{read,write}_regs_mul() can read single bank PCA953x GPIO chips as well. Merge the _8 and _mul functions together to simplify the code a bit. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- V2: No change V3: No change --- drivers/gpio/gpio-pca953x.c | 54 ++++++------------------------------- 1 file changed, 8 insertions(+), 46 deletions(-)