@@ -119,18 +119,21 @@ struct pca953x_reg_config {
int direction;
int output;
int input;
+ int invert;
};
static const struct pca953x_reg_config pca953x_regs = {
.direction = PCA953X_DIRECTION,
.output = PCA953X_OUTPUT,
.input = PCA953X_INPUT,
+ .invert = PCA953X_INVERT,
};
static const struct pca953x_reg_config pca957x_regs = {
.direction = PCA957X_CFG,
.output = PCA957X_OUT,
.input = PCA957X_IN,
+ .invert = PCA957X_INVRT,
};
struct pca953x_chip {
@@ -679,13 +682,11 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
}
#endif
-static int device_pca953x_init(struct pca953x_chip *chip, u32 invert)
+static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert)
{
int ret;
u8 val[MAX_BANK];
- chip->regs = &pca953x_regs;
-
ret = pca953x_read_regs(chip, chip->regs->output, chip->reg_output);
if (ret)
goto out;
@@ -701,7 +702,7 @@ static int device_pca953x_init(struct pca953x_chip *chip, u32 invert)
else
memset(val, 0, NBANK(chip));
- ret = pca953x_write_regs(chip, PCA953X_INVERT, val);
+ ret = pca953x_write_regs(chip, chip->regs->invert, val);
out:
return ret;
}
@@ -711,22 +712,7 @@ static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
int ret;
u8 val[MAX_BANK];
- chip->regs = &pca957x_regs;
-
- ret = pca953x_read_regs(chip, chip->regs->output, chip->reg_output);
- if (ret)
- goto out;
- ret = pca953x_read_regs(chip, chip->regs->direction,
- chip->reg_direction);
- if (ret)
- goto out;
-
- /* set platform specific polarity inversion */
- if (invert)
- memset(val, 0xFF, NBANK(chip));
- else
- memset(val, 0, NBANK(chip));
- ret = pca953x_write_regs(chip, PCA957X_INVRT, val);
+ ret = device_pca95xx_init(chip, invert);
if (ret)
goto out;
@@ -842,10 +828,13 @@ static int pca953x_probe(struct i2c_client *client,
*/
pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
- if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE)
- ret = device_pca953x_init(chip, invert);
- else
+ if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
+ chip->regs = &pca953x_regs;
+ ret = device_pca95xx_init(chip, invert);
+ } else {
+ chip->regs = &pca957x_regs;
ret = device_pca957x_init(chip, invert);
+ }
if (ret)
goto err_exit;
The PCA957x and PCA953x init functions are almost the same, except for the different register mapping and one extra write to BKEN register in case of PCA957x. Factor out the common code. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- V2: No change V3: No change --- drivers/gpio/gpio-pca953x.c | 35 ++++++++++++----------------------- 1 file changed, 12 insertions(+), 23 deletions(-)