diff mbox series

[v4,07/13] usb: renesas_usbhs: add support for CNEN bit

Message ID 20190515152048.42363-8-chris.brandt@renesas.com (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series usb: Add host and device support for RZ/A2 | expand

Commit Message

Chris Brandt May 15, 2019, 3:20 p.m. UTC 
For some SoC, CNEN must be set for USB Device mode operation.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
---
v3:
 * added reviewed-by
v2:
 * options are now held in param
---
 drivers/usb/renesas_usbhs/common.c | 6 ++++++
 drivers/usb/renesas_usbhs/common.h | 1 +
 include/linux/usb/renesas_usbhs.h  | 1 +
 3 files changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 1de7a44f3415..734fb4e542c5 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -114,6 +114,12 @@  void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
 	u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
 	u16 val  = HSE | USBE;
 
+	/* CNEN bit is required for function operation */
+	if (usbhs_get_dparam(priv, has_cnen)) {
+		mask |= CNEN;
+		val  |= CNEN;
+	}
+
 	/*
 	 * if enable
 	 *
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index 1fbffb7bbc8f..de74ebd1a347 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -104,6 +104,7 @@  struct usbhs_priv;
 
 /* SYSCFG */
 #define SCKE	(1 << 10)	/* USB Module Clock Enable */
+#define CNEN	(1 << 8)	/* Single-ended receiver operation Enable */
 #define HSE	(1 << 7)	/* High-Speed Operation Enable */
 #define DCFM	(1 << 6)	/* Controller Function Select */
 #define DRPD	(1 << 5)	/* D+ Line/D- Line Resistance Control */
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 17fae6e504cc..9097a38fcda8 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -190,6 +190,7 @@  struct renesas_usbhs_driver_param {
 	u32 has_sudmac:1; /* for SUDMAC */
 	u32 has_usb_dmac:1; /* for USB-DMAC */
 	u32 runtime_pwctrl:1;
+	u32 has_cnen:1;
 #define USBHS_USB_DMAC_XFER_SIZE	32	/* hardcode the xfer size */
 };