Message ID | 20200115051225.7346-1-marek.vasut@gmail.com (mailing list archive) |
---|---|
State | Mainlined |
Commit | 516f68943a6ad4aadfa384e4ce3751e03e1afbda |
Delegated to: | Geert Uytterhoeven |
Headers | show |
Series | [V2] ARM: dts: renesas: Add missing ethernet PHY reset GPIO on Gen2 reference boards | expand |
Hello: The following patches were marked "accepted", because they were applied to geert/renesas-devel (refs/heads/next): Patch: arm64: dts: renesas: rcar-gen3: Add CCREE nodes Submitter: Geert Uytterhoeven <geert+renesas@glider.be> Patchwork: https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=232961 Patch: arm: dts: renesas: r8a77980: Remove r8a77970 DU compatible Submitter: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Patchwork: https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=173315 Patch: ARM: dts: renesas: Group tuples in operating-points properties Submitter: Geert Uytterhoeven <geert+renesas@glider.be> Patchwork: https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=222603 Patch: [v2] ARM: dts: r7s72100: Add SPIBSC clocks Submitter: Chris Brandt <chris.brandt@renesas.com> Patchwork: https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=239115 Patch: [V2] ARM: dts: renesas: Add missing ethernet PHY reset GPIO on Gen2 reference boards Submitter: Marek Vasut <marek.vasut@gmail.com> Patchwork: https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=228335 Total patches: 5
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 097fd9317c6e..69745def44d4 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -674,6 +674,7 @@ phy1: ethernet-phy@1 { interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts index a315ba749aa4..4138efb2766d 100644 --- a/arch/arm/boot/dts/r8a7790-stout.dts +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -203,6 +203,7 @@ phy1: ethernet-phy@1 { interrupt-parent = <&irqc0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 2b096d5e06fb..687167b70cb6 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -633,6 +633,7 @@ phy1: ethernet-phy@1 { interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index f9ece7ab2010..a8e0335148a5 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -307,6 +307,7 @@ phy1: ethernet-phy@1 { interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 22ca7cd1e7d2..cfe06a74ce89 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -591,6 +591,7 @@ phy1: ethernet-phy@1 { interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index f79fce74cd9c..935935c1dbac 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -343,6 +343,7 @@ phy1: ethernet-phy@1 { interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 2c16ad854300..9aaa96ea9943 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -394,6 +394,7 @@ phy1: ethernet-phy@1 { interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; };