Message ID | 20200401061100.7379-1-etom@igel.co.jp (mailing list archive) |
---|---|
State | New |
Delegated to: | Kieran Bingham |
Headers | show |
Series | drm: rcar-du: Set primary plane zpos immutably at initializing | expand |
Hello Esaki-san, Thank you for the patch. On Wed, Apr 01, 2020 at 03:11:00PM +0900, Tomohito Esaki wrote: > According to drm_plane_create_zpos_property() function documentation, > all planes zpos range should be set if zpos property is supported. > However, the rcar-du driver didn't set primary plane zpos range. Since > the primary plane's zpos is fixed, set i immutably. > > Signed-off-by: Tomohito Esaki <etom@igel.co.jp> > --- > drivers/gpu/drm/rcar-du/rcar_du_plane.c | 5 ++++- > drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 5 ++++- > 2 files changed, 8 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c > index c6430027169f..9a499be45c45 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c > +++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c > @@ -785,8 +785,11 @@ int rcar_du_planes_init(struct rcar_du_group *rgrp) > > drm_plane_create_alpha_property(&plane->plane); > > - if (type == DRM_PLANE_TYPE_PRIMARY) > + if (type == DRM_PLANE_TYPE_PRIMARY) { > + drm_plane_create_zpos_immutable_property(&plane->plane, > + 0); > continue; > + } I would prefer an if ... else ... here and below instead of a continue, to better handle future differences between primary and overlay planes. Apart from that, Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> I've taken the liberty to resend the patch with this change as a v2, with the dri-devel mailing list in CC, and will include it in my next pull request. Would you mind CC'ing me for future patches to the R-Car DU driver ? You can use the scripts/get_maintainer.pl script from the Linux kernel sources to get a list of maintainers, reviewers and mailing lists for a patch. There's no need to CC everybody on that list, but it can give you at least the driver's maintainer and the corresponding mailing list. > > drm_object_attach_property(&plane->plane.base, > rcdu->props.colorkey, > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c > index 5e4faf258c31..382b720edc09 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c > +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c > @@ -392,8 +392,11 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np, > drm_plane_helper_add(&plane->plane, > &rcar_du_vsp_plane_helper_funcs); > > - if (type == DRM_PLANE_TYPE_PRIMARY) > + if (type == DRM_PLANE_TYPE_PRIMARY) { > + drm_plane_create_zpos_immutable_property(&plane->plane, > + 0); > continue; > + } > > drm_plane_create_alpha_property(&plane->plane); > drm_plane_create_zpos_property(&plane->plane, 1, 1,
Hello Laurent-san On 2020/04/05 3:24, Laurent Pinchart wrote: > Hello Esaki-san, > > Thank you for the patch. > > On Wed, Apr 01, 2020 at 03:11:00PM +0900, Tomohito Esaki wrote: >> According to drm_plane_create_zpos_property() function documentation, >> all planes zpos range should be set if zpos property is supported. >> However, the rcar-du driver didn't set primary plane zpos range. Since >> the primary plane's zpos is fixed, set i immutably. >> >> Signed-off-by: Tomohito Esaki <etom@igel.co.jp> >> --- >> drivers/gpu/drm/rcar-du/rcar_du_plane.c | 5 ++++- >> drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 5 ++++- >> 2 files changed, 8 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c >> index c6430027169f..9a499be45c45 100644 >> --- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c >> @@ -785,8 +785,11 @@ int rcar_du_planes_init(struct rcar_du_group *rgrp) >> >> drm_plane_create_alpha_property(&plane->plane); >> >> - if (type == DRM_PLANE_TYPE_PRIMARY) >> + if (type == DRM_PLANE_TYPE_PRIMARY) { >> + drm_plane_create_zpos_immutable_property(&plane->plane, >> + 0); >> continue; >> + } > > I would prefer an if ... else ... here and below instead of a continue, > to better handle future differences between primary and overlay planes. > Apart from that, > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > I've taken the liberty to resend the patch with this change as a v2, > with the dri-devel mailing list in CC, and will include it in my next > pull request. I agree with, thank you for updating patch. > Would you mind CC'ing me for future patches to the R-Car DU driver ? You > can use the scripts/get_maintainer.pl script from the Linux kernel > sources to get a list of maintainers, reviewers and mailing lists for a > patch. There's no need to CC everybody on that list, but it can give you > at least the driver's maintainer and the corresponding mailing list. Sorry, I understood. I would like to add maintainer to CC from next time. >> >> drm_object_attach_property(&plane->plane.base, >> rcdu->props.colorkey, >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c >> index 5e4faf258c31..382b720edc09 100644 >> --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c >> @@ -392,8 +392,11 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np, >> drm_plane_helper_add(&plane->plane, >> &rcar_du_vsp_plane_helper_funcs); >> >> - if (type == DRM_PLANE_TYPE_PRIMARY) >> + if (type == DRM_PLANE_TYPE_PRIMARY) { >> + drm_plane_create_zpos_immutable_property(&plane->plane, >> + 0); >> continue; >> + } >> >> drm_plane_create_alpha_property(&plane->plane); >> drm_plane_create_zpos_property(&plane->plane, 1, 1, > Thanks, Esaki
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c index c6430027169f..9a499be45c45 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c @@ -785,8 +785,11 @@ int rcar_du_planes_init(struct rcar_du_group *rgrp) drm_plane_create_alpha_property(&plane->plane); - if (type == DRM_PLANE_TYPE_PRIMARY) + if (type == DRM_PLANE_TYPE_PRIMARY) { + drm_plane_create_zpos_immutable_property(&plane->plane, + 0); continue; + } drm_object_attach_property(&plane->plane.base, rcdu->props.colorkey, diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c index 5e4faf258c31..382b720edc09 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c @@ -392,8 +392,11 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np, drm_plane_helper_add(&plane->plane, &rcar_du_vsp_plane_helper_funcs); - if (type == DRM_PLANE_TYPE_PRIMARY) + if (type == DRM_PLANE_TYPE_PRIMARY) { + drm_plane_create_zpos_immutable_property(&plane->plane, + 0); continue; + } drm_plane_create_alpha_property(&plane->plane); drm_plane_create_zpos_property(&plane->plane, 1, 1,
According to drm_plane_create_zpos_property() function documentation, all planes zpos range should be set if zpos property is supported. However, the rcar-du driver didn't set primary plane zpos range. Since the primary plane's zpos is fixed, set i immutably. Signed-off-by: Tomohito Esaki <etom@igel.co.jp> --- drivers/gpu/drm/rcar-du/rcar_du_plane.c | 5 ++++- drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-)