| Message ID | 20200422101026.9220-2-erosca@de.adit-jv.com (mailing list archive) |
|---|---|
| State | RFC |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | gpio: rcar: Add support for GPIO alternative interrupt | expand |
Hi Eugeniu, CC devicetree On Wed, Apr 22, 2020 at 12:11 PM Eugeniu Rosca <erosca@de.adit-jv.com> wrote: > From: Torii Kenichi <torii.ken1@jp.fujitsu.com> > > When setting this property, you must set alternate interrupt number in > the 'interrupts' property. > > Signed-off-by: Torii Kenichi <torii.ken1@jp.fujitsu.com> > [erosca: tidy up the descriptions/comments] > Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Thanks for your/forwarding this patch! > --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt > +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt > @@ -50,6 +50,9 @@ Optional properties: > - clocks: Must contain a reference to the functional clock. The property is > mandatory if the hardware implements a controllable functional clock for > the GPIO instance. > + - use-alternative-interrupt: Use 'alternative' GPIO interrupt instead renesas,use-alternative-interrupt? (unless you can convince Rob this becomes a generic property). > + of 'normal' GPIO interrupt. When you specify this property, you must > + also change the 'interrupts' DT property. In light of "DT describes the hardware", I think you should instead list both interrupts in DT. I.e. first/single interrupt is the normal one, second optional interrupt is the alternative one. On R-Car Gen2, the oldest SoC family with this feature I could find, they are called "ext_int" resp. "ext_alt_int", so introducing the optional "clock-names" property would be a good idea, too. > - gpio-reserved-ranges: See gpio.txt. Gr{oetje,eeting}s, Geert
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 10dce84b1545..aa5aea90431a 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -50,6 +50,9 @@ Optional properties: - clocks: Must contain a reference to the functional clock. The property is mandatory if the hardware implements a controllable functional clock for the GPIO instance. + - use-alternative-interrupt: Use 'alternative' GPIO interrupt instead + of 'normal' GPIO interrupt. When you specify this property, you must + also change the 'interrupts' DT property. - gpio-reserved-ranges: See gpio.txt.