deleted file mode 100644
@@ -1,33 +0,0 @@
-* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
-
-The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
-an active array size of 3864H x 2202V. It is programmable through I2C
-interface. The I2C address is fixed to 0x1a as per sensor data sheet.
-Image data is sent through MIPI CSI-2, which is configured as 4 lanes
-at 1440 Mbps.
-
-
-Required Properties:
-- compatible: value should be "sony,imx274" for imx274 sensor
-- reg: I2C bus address of the device
-
-Optional Properties:
-- reset-gpios: Sensor reset GPIO
-
-The imx274 device node should contain one 'port' child node with
-an 'endpoint' subnode. For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
- sensor@1a {
- compatible = "sony,imx274";
- reg = <0x1a>;
- #address-cells = <1>;
- #size-cells = <0>;
- reset-gpios = <&gpio_sensor 0 0>;
- port {
- sensor_out: endpoint {
- remote-endpoint = <&csiss_in>;
- };
- };
- };
new file mode 100644
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx274.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
+
+maintainers:
+ - Leon Luo <leonl@leopardimaging.com>
+
+description: -|
+ The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
+ an active array size of 3864H x 2202V. It is programmable through I2C
+ interface. The I2C address is fixed to 0x1a as per sensor data sheet.
+ Image data is sent through MIPI CSI-2, which is configured as 4 lanes
+ at 1440 Mbps.
+
+properties:
+ compatible:
+ const: sony,imx274
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ reset-gpios:
+ description: Sensor reset GPIO.
+ maxItems: 1
+
+ port:
+ type: object
+ description: |
+ The device node must contain one 'port' child node for its digital output
+ video port, in accordance with the video interface bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+ properties:
+ endpoint:
+ type: object
+ properties:
+ remote-endpoint:
+ description: A phandle to the bus receiver's endpoint node.
+
+ required:
+ - remote-endpoint
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - port
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imx274: camera-sensor@1a {
+ compatible = "sony,imx274";
+ reg = <0x1a>;
+ reset-gpios = <&gpio_sensor 0 0>;
+
+ port {
+ sensor_out: endpoint {
+ remote-endpoint = <&csiss_in>;
+ };
+ };
+ };
+ };
+
+...
@@ -15922,7 +15922,7 @@ M: Leon Luo <leonl@leopardimaging.com>
L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
-F: Documentation/devicetree/bindings/media/i2c/imx274.txt
+F: Documentation/devicetree/bindings/media/i2c/imx274.yaml
F: drivers/media/i2c/imx274.c
SONY IMX290 SENSOR DRIVER
Convert the imx274 bindings document to json-schema and update the MAINTAINERS file accordingly. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- .../devicetree/bindings/media/i2c/imx274.txt | 33 --------- .../devicetree/bindings/media/i2c/imx274.yaml | 74 +++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 75 insertions(+), 34 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.txt create mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.yaml -- 2.27.0