| Message ID | 20200817160129.256085-1-jacopo+renesas@jmondi.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | dt-bindings: media: mt9v111: Convert to json-schema | expand |
Hi Jacopo, Thank you for the patch. On Mon, Aug 17, 2020 at 06:01:29PM +0200, Jacopo Mondi wrote: > Convert the mt9v111 bindings document to json-schema and update > the MAINTAINERS file accordingly. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > --- > .../bindings/media/i2c/aptina,mt9v111.txt | 46 ---------- > .../bindings/media/i2c/aptina,mt9v111.yaml | 83 +++++++++++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 84 insertions(+), 47 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt > create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt > deleted file mode 100644 > index bd896e9f67d1..000000000000 > --- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt > +++ /dev/null > @@ -1,46 +0,0 @@ > -* Aptina MT9V111 CMOS sensor > ----------------------------- > - > -The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core > -based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP). > - > -The sensor has an active pixel array of 640x480 pixels and can output a number > -of image resolution and formats controllable through a simple two-wires > -interface. > - > -Required properties: > --------------------- > - > -- compatible: shall be "aptina,mt9v111". > -- clocks: reference to the system clock input provider. > - > -Optional properties: > --------------------- > - > -- enable-gpios: output enable signal, pin name "OE#". Active low. > -- standby-gpios: low power state control signal, pin name "STANDBY". > - Active high. > -- reset-gpios: chip reset signal, pin name "RESET#". Active low. > - > -The device node must contain one 'port' child node with one 'endpoint' child > -sub-node for its digital output video port, in accordance with the video > -interface bindings defined in: > -Documentation/devicetree/bindings/media/video-interfaces.txt > - > -Example: > --------- > - > - &i2c1 { > - camera@48 { > - compatible = "aptina,mt9v111"; > - reg = <0x48>; > - > - clocks = <&camera_clk>; > - > - port { > - mt9v111_out: endpoint { > - remote-endpoint = <&ceu_in>; > - }; > - }; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml > new file mode 100644 > index 000000000000..54cc136aa239 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml > @@ -0,0 +1,83 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Aptina MT9V111 CMOS sensor > + > +maintainers: > + - Jacopo Mondi <jacopo@jmondi.org> > + > +description: -| > + The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core > + based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP). > + > + The sensor has an active pixel array of 640x480 pixels and can output a number > + of image resolution and formats controllable through a simple two-wires s/resolution/resolutions/ > + interface. > + > +properties: > + compatible: > + const: aptina,mt9v111 > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + enable-gpios: > + description: Enable signal, pin name "OE#". Active low. > + maxItems: 1 > + > + standby-gpios: > + description: Low power state control signal, pin name "STANBY". Active high. s/STANBY/STANDBY/ > + maxItems: 1 > + > + reset-gpios: > + description: Chip reset signal, pin name "RESET#". Active low. > + maxItems: 1 > + > + port: > + type: object > + description: | > + The device node must contain one 'port' child node for its digital output > + video port, in accordance with the video interface bindings defined in > + Documentation/devicetree/bindings/media/video-interfaces.txt. Just "Output video port. See ../video-interfaces.txt." should be enough. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + > + properties: > + endpoint: > + type: object > + properties: > + remote-endpoint: > + description: A phandle to the bus receiver's endpoint node. > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - clocks > + - port > + > +examples: > + - | > + i2c0 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + camera@48 { > + compatible = "aptina,mt9v111"; > + reg = <0x48>; > + clocks = <&camera_clk>; > + > + port { > + mt9v111_out: endpoint { > + remote-endpoint = <&ceu_in>; > + }; > + }; > + }; > + }; > + > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index 5392f00cec46..18bc4427e6b0 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11688,7 +11688,7 @@ M: Jacopo Mondi <jacopo@jmondi.org> > L: linux-media@vger.kernel.org > S: Maintained > T: git git://linuxtv.org/media_tree.git > -F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt > +F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml > F: drivers/media/i2c/mt9v111.c > > MULTIFUNCTION DEVICES (MFD)
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt deleted file mode 100644 index bd896e9f67d1..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Aptina MT9V111 CMOS sensor ----------------------------- - -The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core -based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP). - -The sensor has an active pixel array of 640x480 pixels and can output a number -of image resolution and formats controllable through a simple two-wires -interface. - -Required properties: --------------------- - -- compatible: shall be "aptina,mt9v111". -- clocks: reference to the system clock input provider. - -Optional properties: --------------------- - -- enable-gpios: output enable signal, pin name "OE#". Active low. -- standby-gpios: low power state control signal, pin name "STANDBY". - Active high. -- reset-gpios: chip reset signal, pin name "RESET#". Active low. - -The device node must contain one 'port' child node with one 'endpoint' child -sub-node for its digital output video port, in accordance with the video -interface bindings defined in: -Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: --------- - - &i2c1 { - camera@48 { - compatible = "aptina,mt9v111"; - reg = <0x48>; - - clocks = <&camera_clk>; - - port { - mt9v111_out: endpoint { - remote-endpoint = <&ceu_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml new file mode 100644 index 000000000000..54cc136aa239 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aptina MT9V111 CMOS sensor + +maintainers: + - Jacopo Mondi <jacopo@jmondi.org> + +description: -| + The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core + based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP). + + The sensor has an active pixel array of 640x480 pixels and can output a number + of image resolution and formats controllable through a simple two-wires + interface. + +properties: + compatible: + const: aptina,mt9v111 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + enable-gpios: + description: Enable signal, pin name "OE#". Active low. + maxItems: 1 + + standby-gpios: + description: Low power state control signal, pin name "STANBY". Active high. + maxItems: 1 + + reset-gpios: + description: Chip reset signal, pin name "RESET#". Active low. + maxItems: 1 + + port: + type: object + description: | + The device node must contain one 'port' child node for its digital output + video port, in accordance with the video interface bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + endpoint: + type: object + properties: + remote-endpoint: + description: A phandle to the bus receiver's endpoint node. + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - port + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + camera@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + clocks = <&camera_clk>; + + port { + mt9v111_out: endpoint { + remote-endpoint = <&ceu_in>; + }; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 5392f00cec46..18bc4427e6b0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11688,7 +11688,7 @@ M: Jacopo Mondi <jacopo@jmondi.org> L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media_tree.git -F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt +F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml F: drivers/media/i2c/mt9v111.c MULTIFUNCTION DEVICES (MFD)
Convert the mt9v111 bindings document to json-schema and update the MAINTAINERS file accordingly. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- .../bindings/media/i2c/aptina,mt9v111.txt | 46 ---------- .../bindings/media/i2c/aptina,mt9v111.yaml | 83 +++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 84 insertions(+), 47 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml -- 2.27.0