deleted file mode 100644
@@ -1,46 +0,0 @@
-* Aptina MT9V111 CMOS sensor
-----------------------------
-
-The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
-based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
-
-The sensor has an active pixel array of 640x480 pixels and can output a number
-of image resolution and formats controllable through a simple two-wires
-interface.
-
-Required properties:
---------------------
-
-- compatible: shall be "aptina,mt9v111".
-- clocks: reference to the system clock input provider.
-
-Optional properties:
---------------------
-
-- enable-gpios: output enable signal, pin name "OE#". Active low.
-- standby-gpios: low power state control signal, pin name "STANDBY".
- Active high.
-- reset-gpios: chip reset signal, pin name "RESET#". Active low.
-
-The device node must contain one 'port' child node with one 'endpoint' child
-sub-node for its digital output video port, in accordance with the video
-interface bindings defined in:
-Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
---------
-
- &i2c1 {
- camera@48 {
- compatible = "aptina,mt9v111";
- reg = <0x48>;
-
- clocks = <&camera_clk>;
-
- port {
- mt9v111_out: endpoint {
- remote-endpoint = <&ceu_in>;
- };
- };
- };
- };
new file mode 100644
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina MT9V111 CMOS sensor
+
+maintainers:
+ - Jacopo Mondi <jacopo@jmondi.org>
+
+description: -|
+ The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
+ based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
+
+ The sensor has an active pixel array of 640x480 pixels and can output a number
+ of image resolutions and formats controllable through a simple two-wires
+ interface.
+
+properties:
+ compatible:
+ const: aptina,mt9v111
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ enable-gpios:
+ description: Enable signal, pin name "OE#". Active low.
+ maxItems: 1
+
+ standby-gpios:
+ description: -|
+ Low power state control signal, pin name "STANDBY". Active high.
+ maxItems: 1
+
+ reset-gpios:
+ description: Chip reset signal, pin name "RESET#". Active low.
+ maxItems: 1
+
+ port:
+ type: object
+ description: |
+ Output video port. See ../video-interfaces.txt.
+
+ properties:
+ endpoint:
+ type: object
+ properties:
+ remote-endpoint:
+ description: A phandle to the bus receiver's endpoint node.
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@48 {
+ compatible = "aptina,mt9v111";
+ reg = <0x48>;
+ clocks = <&camera_clk>;
+
+ port {
+ mt9v111_out: endpoint {
+ remote-endpoint = <&ceu_in>;
+ };
+ };
+ };
+ };
+
+...
@@ -11806,7 +11806,7 @@ M: Jacopo Mondi <jacopo@jmondi.org>
L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
-F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
+F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
F: drivers/media/i2c/mt9v111.c
MULTIFUNCTION DEVICES (MFD)