From patchwork Wed Sep 16 15:57:01 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 11781001 X-Patchwork-Delegate: geert@linux-m68k.org Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 3153114F6 for ; Wed, 16 Sep 2020 21:03:44 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 10FAF206BE for ; Wed, 16 Sep 2020 21:03:44 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1600290224; bh=mwfyYKJFeZITqcC9w7zWalo9zJ3c6qn+uP8pO8tqZTk=; h=From:To:Cc:Subject:Date:In-Reply-To:References:List-ID:From; b=bzUsjTEm7EnS4+ZKR63PHJANfuFa+5OYOTBMSZfqHIqDmSTATXYYTnlmpAhIjHOw6 7aRR0g2kUssZ5AwEwpNl/0odOLaou1V0CBosfZ9f10sHBR1Stwkg3eldQdi4Yjx5WT AaURTuBbb8ZJ8eKOlAHZtwvkoHgUB0Cs2Z9jYi/Y= Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726576AbgIPVDj (ORCPT ); Wed, 16 Sep 2020 17:03:39 -0400 Received: from mail.kernel.org ([198.145.29.99]:36332 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726436AbgIPQPD (ORCPT ); Wed, 16 Sep 2020 12:15:03 -0400 Received: from kozik-lap.mshome.net (unknown [194.230.155.191]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 33249208E4; Wed, 16 Sep 2020 15:57:34 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1600271861; bh=mwfyYKJFeZITqcC9w7zWalo9zJ3c6qn+uP8pO8tqZTk=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=2XNMsAMn5xjxKI5EEvTgOkMnGgcZTQTeGswXgHaUtGSkF/gREa2oE1OUFAXJzK4rE 6d7XD0xnuaSkXyqSp8VX8iUj6n/GQy83eH+6vobJRrXV27PaeQLUBKAzmmJHqfqvzw a/39TW1Cs26rKiXSMBEq5clso97LQKVAmtHL5xr0= From: Krzysztof Kozlowski To: Linus Walleij , Bartosz Golaszewski , Rob Herring , =?utf-8?q?Beno=C3=AEt_Cousson?= , Tony Lindgren , Jason Cooper , Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Russell King , Joel Stanley , Andrew Jeffery , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Matthias Brugger , Geert Uytterhoeven , Magnus Damm , Tero Kristo , Nishanth Menon , Michal Simek , linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-mediatek@lists.infradead.org, linux-renesas-soc@vger.kernel.org Cc: Krzysztof Kozlowski Subject: [PATCH v3 01/15] dt-bindings: gpio: convert bindings for NXP PCA953x family to dtschema Date: Wed, 16 Sep 2020 17:57:01 +0200 Message-Id: <20200916155715.21009-2-krzk@kernel.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200916155715.21009-1-krzk@kernel.org> References: <20200916155715.21009-1-krzk@kernel.org> Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Convert the NXP PCA953x family of GPIO expanders bindings to device tree schema. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring --- Changes since v2: 1. Add Rob's review tag Changes since v1: 1. Use additionalProperties. 2. Add wakeup-source. 3. Add hogs. 4. Extend example with hogs. --- .../devicetree/bindings/gpio/gpio-pca953x.txt | 90 ---------- .../bindings/gpio/gpio-pca95xx.yaml | 166 ++++++++++++++++++ .../devicetree/bindings/trivial-devices.yaml | 4 - 3 files changed, 166 insertions(+), 94 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-pca953x.txt create mode 100644 Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt deleted file mode 100644 index 3126c3817e2a..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt +++ /dev/null @@ -1,90 +0,0 @@ -* NXP PCA953x I2C GPIO multiplexer - -Required properties: - - compatible: Has to contain one of the following: - nxp,pca6416 - nxp,pca9505 - nxp,pca9534 - nxp,pca9535 - nxp,pca9536 - nxp,pca9537 - nxp,pca9538 - nxp,pca9539 - nxp,pca9554 - nxp,pca9555 - nxp,pca9556 - nxp,pca9557 - nxp,pca9574 - nxp,pca9575 - nxp,pca9698 - nxp,pcal6416 - nxp,pcal6524 - nxp,pcal9535 - nxp,pcal9555a - maxim,max7310 - maxim,max7312 - maxim,max7313 - maxim,max7315 - ti,pca6107 - ti,pca9536 - ti,tca6408 - ti,tca6416 - ti,tca6424 - ti,tca9539 - ti,tca9554 - onnn,cat9554 - onnn,pca9654 - exar,xra1202 - - gpio-controller: if used as gpio expander. - - #gpio-cells: if used as gpio expander. - - interrupt-controller: if to be used as interrupt expander. - - #interrupt-cells: if to be used as interrupt expander. - -Optional properties: - - interrupts: interrupt specifier for the device's interrupt output. - - reset-gpios: GPIO specification for the RESET input. This is an - active low signal to the PCA953x. - - vcc-supply: power supply regulator. - -Example: - - - gpio@20 { - compatible = "nxp,pca9505"; - reg = <0x20>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pca9505>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&gpio3>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; - }; - - -Example with Interrupts: - - - gpio99: gpio@22 { - compatible = "nxp,pcal6524"; - reg = <0x22>; - interrupt-parent = <&gpio6>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */ - interrupt-controller; - #interrupt-cells = <2>; - vcc-supply = <&vdds_1v8_main>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = - "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03", "vibra", "fault2", "p06", "p07", - "en-usb", "en-host1", "en-host2", "chg-int", "p14", "p15", "mic-int", "en-modem", - "shdn-hs-amp", "chg-status+red", "green", "blue", "en-esata", "fault1", "p26", "p27"; - }; - - ts3a227@3b { - compatible = "ti,ts3a227e"; - reg = <0x3b>; - interrupt-parent = <&gpio99>; - interrupts = <14 IRQ_TYPE_EDGE_RISING>; - ti,micbias = <0>; /* 2.1V */ - }; - diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml new file mode 100644 index 000000000000..7ff6efadf797 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA95xx I2C GPIO multiplexer + +maintainers: + - Krzysztof Kozlowski + +properties: + compatible: + enum: + - exar,xra1202 + - maxim,max7310 + - maxim,max7312 + - maxim,max7313 + - maxim,max7315 + - nxp,pca6416 + - nxp,pca9505 + - nxp,pca9534 + - nxp,pca9535 + - nxp,pca9536 + - nxp,pca9537 + - nxp,pca9538 + - nxp,pca9539 + - nxp,pca9554 + - nxp,pca9555 + - nxp,pca9556 + - nxp,pca9557 + - nxp,pca9574 + - nxp,pca9575 + - nxp,pca9698 + - nxp,pcal6416 + - nxp,pcal6524 + - nxp,pcal9535 + - nxp,pcal9555a + - onnn,cat9554 + - onnn,pca9654 + - ti,pca6107 + - ti,pca9536 + - ti,tca6408 + - ti,tca6416 + - ti,tca6424 + - ti,tca9539 + - ti,tca9554 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-line-names: + minItems: 1 + maxItems: 32 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + reset-gpios: + description: + GPIO specification for the RESET input. This is an active low signal to + the PCA953x. + + vcc-supply: + description: + Optional power supply + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + +patternProperties: + "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$": + type: object + properties: + gpio-hog: true + gpios: true + input: true + output-high: true + output-low: true + line-name: true + + required: + - gpio-hog + - gpios + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include + #include + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + gpio@20 { + compatible = "nxp,pca9505"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9505>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio3>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + + usb3-sata-sel-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "usb3_sata_sel"; + }; + }; + }; + + - | + #include + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + gpio99: gpio@22 { + compatible = "nxp,pcal6524"; + reg = <0x22>; + interrupt-parent = <&gpio6>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */ + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <&vdds_1v8_main>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03", + "vibra", "fault2", "p06", "p07", "en-usb", + "en-host1", "en-host2", "chg-int", "p14", "p15", + "mic-int", "en-modem", "shdn-hs-amp", + "chg-status+red", "green", "blue", "en-esata", + "fault1", "p26", "p27"; + }; + + ts3a227@3b { + compatible = "ti,ts3a227e"; + reg = <0x3b>; + interrupt-parent = <&gpio99>; + interrupts = <14 IRQ_TYPE_EDGE_RISING>; + ti,micbias = <0>; /* 2.1V */ + }; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 25cfcc904240..442a1f537651 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -322,10 +322,6 @@ properties: - nuvoton,npct601 # Nuvoton Temperature Sensor - nuvoton,w83773g - # Octal SMBus and I2C registered interface - - nxp,pca9556 - # 8-bit I2C-bus and SMBus I/O port with reset - - nxp,pca9557 # OKI ML86V7667 video decoder - oki,ml86v7667 # OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus