| Message ID | 20201116135305.81319-8-jacopo+renesas@jmondi.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | media: i2c: Add RDACM21 camera module | expand |
Hi Jacopo, On 16/11/2020 13:53, Jacopo Mondi wrote: > Use the newly introduced 'maxim,initial-reverse-channel-mV' > property to specify the initial reverse channel amplitude when > the remote serializers are pre-programmed with noise immunity threshold > enabled. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > --- > arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi > index 6f4798859542..f14a133b7302 100644 > --- a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi > +++ b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi > @@ -128,6 +128,7 @@ gmsl-deserializer@4c { > compatible = "maxim,max9286"; > reg = <0x4c>; > poc-supply = <&poc_12v>; > + maxim,initial-reverse-channel-mV = <170>; > > ports { > #address-cells = <1>; > @@ -263,6 +264,7 @@ gmsl-deserializer@6c { > compatible = "maxim,max9286"; > reg = <0x6c>; > poc-supply = <&poc_12v>; > + maxim,initial-reverse-channel-mV = <170>; > > ports { > #address-cells = <1>; >
diff --git a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi index 6f4798859542..f14a133b7302 100644 --- a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi @@ -128,6 +128,7 @@ gmsl-deserializer@4c { compatible = "maxim,max9286"; reg = <0x4c>; poc-supply = <&poc_12v>; + maxim,initial-reverse-channel-mV = <170>; ports { #address-cells = <1>; @@ -263,6 +264,7 @@ gmsl-deserializer@6c { compatible = "maxim,max9286"; reg = <0x6c>; poc-supply = <&poc_12v>; + maxim,initial-reverse-channel-mV = <170>; ports { #address-cells = <1>;
Use the newly introduced 'maxim,initial-reverse-channel-mV' property to specify the initial reverse channel amplitude when the remote serializers are pre-programmed with noise immunity threshold enabled. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi | 2 ++ 1 file changed, 2 insertions(+)