diff mbox series

[v5,8/8,DNI] arm64: dts: renesas: eagle: Specify channel amplitude

Message ID 20201116135305.81319-9-jacopo+renesas@jmondi.org (mailing list archive)
State Superseded
Delegated to: Kieran Bingham
Headers show
Series media: i2c: Add RDACM21 camera module | expand

Commit Message

Jacopo Mondi Nov. 16, 2020, 1:53 p.m. UTC 
Use the newly introduced 'maxim,initial-reverse-channel-mV'
property to specify the initial reverse channel amplitude when the
remote serializers are not pre-programmed with noise immunity threshold
enabled.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 45b947d44cee..75296865104c 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -308,6 +308,7 @@  gmsl: gmsl-deserializer@48 {
 
 		/* eagle-pca9654-max9286-pwdn */
 		enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
+		maxim,initial-reverse-channel-mV = <100>;
 
 		/*
 		 * Workaround: Hog the CAMVDD line high as we can't establish a