diff mbox series

[v7,5/7] media: i2c: max9286: Break-out reverse channel setup

Message ID 20210113185506.119808-6-jacopo+renesas@jmondi.org (mailing list archive)
State Superseded
Delegated to: Kieran Bingham
Headers show
Series media: i2c: Add RDACM21 camera module | expand

Commit Message

Jacopo Mondi Jan. 13, 2021, 6:55 p.m. UTC 
Break out the reverse channel setup configuration procedure to its own
function.

This change prepares for configuring the reverse channel conditionally
to the remote side high threshold configuration.

No functional changes intended.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesasa@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 drivers/media/i2c/max9286.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index c82c1493e099..1cfc8801c0b2 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -336,6 +336,22 @@  static void max9286_configure_i2c(struct max9286_priv *priv, bool localack)
 	usleep_range(3000, 5000);
 }
 
+static void max9286_reverse_channel_setup(struct max9286_priv *priv)
+{
+	/*
+	 * Reverse channel setup.
+	 *
+	 * - Enable custom reverse channel configuration (through register 0x3f)
+	 *   and set the first pulse length to 35 clock cycles.
+	 * - Increase the reverse channel amplitude to 170mV to accommodate the
+	 *   high threshold enabled by the serializer driver.
+	 */
+	max9286_write(priv, 0x3f, MAX9286_EN_REV_CFG | MAX9286_REV_FLEN(35));
+	max9286_write(priv, 0x3b, MAX9286_REV_TRF(1) | MAX9286_REV_AMP(70) |
+		      MAX9286_REV_AMP_X);
+	usleep_range(2000, 2500);
+}
+
 /*
  * max9286_check_video_links() - Make sure video links are detected and locked
  *
@@ -941,19 +957,7 @@  static int max9286_setup(struct max9286_priv *priv)
 	 * only. This should be disabled after the mux is initialised.
 	 */
 	max9286_configure_i2c(priv, true);
-
-	/*
-	 * Reverse channel setup.
-	 *
-	 * - Enable custom reverse channel configuration (through register 0x3f)
-	 *   and set the first pulse length to 35 clock cycles.
-	 * - Increase the reverse channel amplitude to 170mV to accommodate the
-	 *   high threshold enabled by the serializer driver.
-	 */
-	max9286_write(priv, 0x3f, MAX9286_EN_REV_CFG | MAX9286_REV_FLEN(35));
-	max9286_write(priv, 0x3b, MAX9286_REV_TRF(1) | MAX9286_REV_AMP(70) |
-		      MAX9286_REV_AMP_X);
-	usleep_range(2000, 2500);
+	max9286_reverse_channel_setup(priv);
 
 	/*
 	 * Enable GMSL links, mask unused ones and autodetect link