| Message ID | 20210415122602.87697-2-jacopo+renesas@jmondi.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | arm64: dts: renesas: Enable GMSL on R8A77970 V3M Eagle | expand |
Hi Jacopo, Thank you for the patch. On Thu, Apr 15, 2021 at 02:25:56PM +0200, Jacopo Mondi wrote: > The dt-bindings examples are usually indented with 4 spaces. > > The maxim,max9286 schema has the example indented with only > 2 spaces, re-indent it. > > Cosmetic change only. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested by applying and verifying that `git show -b` shows an empty diff. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > .../bindings/media/i2c/maxim,max9286.yaml | 214 +++++++++--------- > 1 file changed, 107 insertions(+), 107 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > index ee16102fdfe7..0e7162998b77 100644 > --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > @@ -191,140 +191,140 @@ examples: > #include <dt-bindings/gpio/gpio.h> > > i2c@e66d8000 { > - #address-cells = <1>; > - #size-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > > - reg = <0 0xe66d8000>; > + reg = <0 0xe66d8000>; > > - gmsl-deserializer@2c { > - compatible = "maxim,max9286"; > - reg = <0x2c>; > - poc-supply = <&camera_poc_12v>; > - enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; > + gmsl-deserializer@2c { > + compatible = "maxim,max9286"; > + reg = <0x2c>; > + poc-supply = <&camera_poc_12v>; > + enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; > > - gpio-controller; > - #gpio-cells = <2>; > + gpio-controller; > + #gpio-cells = <2>; > > - maxim,reverse-channel-microvolt = <170000>; > + maxim,reverse-channel-microvolt = <170000>; > > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > > - port@0 { > - reg = <0>; > + port@0 { > + reg = <0>; > > - max9286_in0: endpoint { > - remote-endpoint = <&rdacm20_out0>; > - }; > - }; > - > - port@1 { > - reg = <1>; > - > - max9286_in1: endpoint { > - remote-endpoint = <&rdacm20_out1>; > - }; > - }; > - > - port@2 { > - reg = <2>; > - > - max9286_in2: endpoint { > - remote-endpoint = <&rdacm20_out2>; > - }; > - }; > + max9286_in0: endpoint { > + remote-endpoint = <&rdacm20_out0>; > + }; > + }; > > - port@3 { > - reg = <3>; > + port@1 { > + reg = <1>; > > - max9286_in3: endpoint { > - remote-endpoint = <&rdacm20_out3>; > - }; > - }; > + max9286_in1: endpoint { > + remote-endpoint = <&rdacm20_out1>; > + }; > + }; > > - port@4 { > - reg = <4>; > + port@2 { > + reg = <2>; > > - max9286_out: endpoint { > - data-lanes = <1 2 3 4>; > - remote-endpoint = <&csi40_in>; > - }; > - }; > - }; > + max9286_in2: endpoint { > + remote-endpoint = <&rdacm20_out2>; > + }; > + }; > > - i2c-mux { > - #address-cells = <1>; > - #size-cells = <0>; > + port@3 { > + reg = <3>; > > - i2c@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0>; > + max9286_in3: endpoint { > + remote-endpoint = <&rdacm20_out3>; > + }; > + }; > > - camera@51 { > - compatible = "imi,rdacm20"; > - reg = <0x51>, <0x61>; > + port@4 { > + reg = <4>; > > - port { > - rdacm20_out0: endpoint { > - remote-endpoint = <&max9286_in0>; > + max9286_out: endpoint { > + data-lanes = <1 2 3 4>; > + remote-endpoint = <&csi40_in>; > + }; > }; > - }; > - > }; > - }; > - > - i2c@1 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <1>; > > - camera@52 { > - compatible = "imi,rdacm20"; > - reg = <0x52>, <0x62>; > + i2c-mux { > + #address-cells = <1>; > + #size-cells = <0>; > > - port { > - rdacm20_out1: endpoint { > - remote-endpoint = <&max9286_in1>; > - }; > - }; > - }; > - }; > + i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > > - i2c@2 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <2>; > + camera@51 { > + compatible = "imi,rdacm20"; > + reg = <0x51>, <0x61>; > > - camera@53 { > - compatible = "imi,rdacm20"; > - reg = <0x53>, <0x63>; > + port { > + rdacm20_out0: endpoint { > + remote-endpoint = <&max9286_in0>; > + }; > + }; > > - port { > - rdacm20_out2: endpoint { > - remote-endpoint = <&max9286_in2>; > + }; > }; > - }; > - }; > - }; > > - i2c@3 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <3>; > + i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + camera@52 { > + compatible = "imi,rdacm20"; > + reg = <0x52>, <0x62>; > + > + port { > + rdacm20_out1: endpoint { > + remote-endpoint = <&max9286_in1>; > + }; > + }; > + }; > + }; > > - camera@54 { > - compatible = "imi,rdacm20"; > - reg = <0x54>, <0x64>; > + i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + > + camera@53 { > + compatible = "imi,rdacm20"; > + reg = <0x53>, <0x63>; > + > + port { > + rdacm20_out2: endpoint { > + remote-endpoint = <&max9286_in2>; > + }; > + }; > + }; > + }; > > - port { > - rdacm20_out3: endpoint { > - remote-endpoint = <&max9286_in3>; > + i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + > + camera@54 { > + compatible = "imi,rdacm20"; > + reg = <0x54>, <0x64>; > + > + port { > + rdacm20_out3: endpoint { > + remote-endpoint = <&max9286_in3>; > + }; > + }; > + }; > }; > - }; > }; > - }; > }; > - }; > };
On Thu, 15 Apr 2021 14:25:56 +0200, Jacopo Mondi wrote: > The dt-bindings examples are usually indented with 4 spaces. > > The maxim,max9286 schema has the example indented with only > 2 spaces, re-indent it. > > Cosmetic change only. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > --- > .../bindings/media/i2c/maxim,max9286.yaml | 214 +++++++++--------- > 1 file changed, 107 insertions(+), 107 deletions(-) > Acked-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index ee16102fdfe7..0e7162998b77 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -191,140 +191,140 @@ examples: #include <dt-bindings/gpio/gpio.h> i2c@e66d8000 { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - reg = <0 0xe66d8000>; + reg = <0 0xe66d8000>; - gmsl-deserializer@2c { - compatible = "maxim,max9286"; - reg = <0x2c>; - poc-supply = <&camera_poc_12v>; - enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + gmsl-deserializer@2c { + compatible = "maxim,max9286"; + reg = <0x2c>; + poc-supply = <&camera_poc_12v>; + enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; - gpio-controller; - #gpio-cells = <2>; + gpio-controller; + #gpio-cells = <2>; - maxim,reverse-channel-microvolt = <170000>; + maxim,reverse-channel-microvolt = <170000>; - ports { - #address-cells = <1>; - #size-cells = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - port@0 { - reg = <0>; + port@0 { + reg = <0>; - max9286_in0: endpoint { - remote-endpoint = <&rdacm20_out0>; - }; - }; - - port@1 { - reg = <1>; - - max9286_in1: endpoint { - remote-endpoint = <&rdacm20_out1>; - }; - }; - - port@2 { - reg = <2>; - - max9286_in2: endpoint { - remote-endpoint = <&rdacm20_out2>; - }; - }; + max9286_in0: endpoint { + remote-endpoint = <&rdacm20_out0>; + }; + }; - port@3 { - reg = <3>; + port@1 { + reg = <1>; - max9286_in3: endpoint { - remote-endpoint = <&rdacm20_out3>; - }; - }; + max9286_in1: endpoint { + remote-endpoint = <&rdacm20_out1>; + }; + }; - port@4 { - reg = <4>; + port@2 { + reg = <2>; - max9286_out: endpoint { - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; - }; - }; - }; + max9286_in2: endpoint { + remote-endpoint = <&rdacm20_out2>; + }; + }; - i2c-mux { - #address-cells = <1>; - #size-cells = <0>; + port@3 { + reg = <3>; - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; + max9286_in3: endpoint { + remote-endpoint = <&rdacm20_out3>; + }; + }; - camera@51 { - compatible = "imi,rdacm20"; - reg = <0x51>, <0x61>; + port@4 { + reg = <4>; - port { - rdacm20_out0: endpoint { - remote-endpoint = <&max9286_in0>; + max9286_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; }; - }; - }; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - camera@52 { - compatible = "imi,rdacm20"; - reg = <0x52>, <0x62>; + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; - port { - rdacm20_out1: endpoint { - remote-endpoint = <&max9286_in1>; - }; - }; - }; - }; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; + camera@51 { + compatible = "imi,rdacm20"; + reg = <0x51>, <0x61>; - camera@53 { - compatible = "imi,rdacm20"; - reg = <0x53>, <0x63>; + port { + rdacm20_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; - port { - rdacm20_out2: endpoint { - remote-endpoint = <&max9286_in2>; + }; }; - }; - }; - }; - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + camera@52 { + compatible = "imi,rdacm20"; + reg = <0x52>, <0x62>; + + port { + rdacm20_out1: endpoint { + remote-endpoint = <&max9286_in1>; + }; + }; + }; + }; - camera@54 { - compatible = "imi,rdacm20"; - reg = <0x54>, <0x64>; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + camera@53 { + compatible = "imi,rdacm20"; + reg = <0x53>, <0x63>; + + port { + rdacm20_out2: endpoint { + remote-endpoint = <&max9286_in2>; + }; + }; + }; + }; - port { - rdacm20_out3: endpoint { - remote-endpoint = <&max9286_in3>; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + camera@54 { + compatible = "imi,rdacm20"; + reg = <0x54>, <0x64>; + + port { + rdacm20_out3: endpoint { + remote-endpoint = <&max9286_in3>; + }; + }; + }; }; - }; }; - }; }; - }; };
The dt-bindings examples are usually indented with 4 spaces. The maxim,max9286 schema has the example indented with only 2 spaces, re-indent it. Cosmetic change only. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- .../bindings/media/i2c/maxim,max9286.yaml | 214 +++++++++--------- 1 file changed, 107 insertions(+), 107 deletions(-)