@@ -11360,6 +11360,12 @@ S: Maintained
F: Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
F: drivers/media/i2c/max9286.c
+MAX96712 QUAD GMSL2 DESERIALIZER DRIVER
+M: Niklas Söderlund <niklas.soderlund@ragnatech.se>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/staging/media/max96712/max96712.c
+
MAX9860 MONO AUDIO VOICE CODEC DRIVER
M: Peter Rosin <peda@axentia.se>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -26,6 +26,8 @@ source "drivers/staging/media/hantro/Kconfig"
source "drivers/staging/media/imx/Kconfig"
+source "drivers/staging/media/max96712/Kconfig"
+
source "drivers/staging/media/meson/vdec/Kconfig"
source "drivers/staging/media/omap4iss/Kconfig"
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_INTEL_ATOMISP) += atomisp/
obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx/
+obj-$(CONFIG_VIDEO_MAX96712) += max96712/
obj-$(CONFIG_VIDEO_MESON_VDEC) += meson/vdec/
obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/
obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC) += rkvdec/
new file mode 100644
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+config VIDEO_MAX96712
+ tristate "Maxim MAX96712 Quad GMSL2 Deserializer support"
+ depends on I2C
+ depends on OF_GPIO
+ depends on VIDEO_V4L2
+ select V4L2_FWNODE
+ select VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ help
+ This driver supports the Maxim MAX96712 Quad GMSL2 Deserializer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called max96712.
new file mode 100644
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_VIDEO_MAX96712) += max96712.o
new file mode 100644
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Maxim MAX9286 Quad GMSL2 Deserializer Driver
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ * Copyright (C) 2021 Niklas Söderlund
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/regmap.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#define MAX96712_ID 0x20
+
+#define MAX96712_DPLL_FREQ 1000
+
+enum max96712_pattern {
+ MAX96712_PATTERN_CHECKERBOARD = 0,
+ MAX96712_PATTERN_GRADIENT,
+};
+
+struct max96712_priv {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct gpio_desc *gpiod_pwdn;
+
+ struct v4l2_fwnode_bus_mipi_csi2 mipi;
+
+ struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler ctrl_handler;
+ struct media_pad pads[1];
+
+ enum max96712_pattern pattern;
+};
+
+static int max96712_read(struct max96712_priv *priv, int reg)
+{
+ int ret, val;
+
+ ret = regmap_read(priv->regmap, reg, &val);
+ if (ret) {
+ dev_err(&priv->client->dev, "read 0x%04x failed\n", reg);
+ return ret;
+ }
+
+ return val;
+}
+
+static int max96712_write(struct max96712_priv *priv, unsigned int reg, u8 val)
+{
+ int ret;
+
+ ret = regmap_write(priv->regmap, reg, val);
+ if (ret)
+ dev_err(&priv->client->dev, "write 0x%04x failed\n", reg);
+
+ return ret;
+}
+
+static int max96712_update_bits(struct max96712_priv *priv, unsigned int reg,
+ u8 mask, u8 val)
+{
+ int ret;
+
+ ret = regmap_update_bits(priv->regmap, reg, mask, val);
+ if (ret)
+ dev_err(&priv->client->dev, "update 0x%04x failed\n", reg);
+
+ return ret;
+}
+
+static int max96712_write_bulk(struct max96712_priv *priv, unsigned int reg,
+ const void *val, size_t val_count)
+{
+ int ret;
+
+ ret = regmap_bulk_write(priv->regmap, reg, val, val_count);
+ if (ret)
+ dev_err(&priv->client->dev, "bulk write 0x%04x failed\n", reg);
+
+ return ret;
+}
+
+static int max96712_write_bulk_value(struct max96712_priv *priv,
+ unsigned int reg, unsigned int val,
+ size_t val_count)
+{
+ unsigned int i;
+ u8 values[4];
+
+ for (i = 1; i <= val_count; i++)
+ values[i - 1] = (val >> ((val_count - i) * 8)) & 0xff;
+
+ return max96712_write_bulk(priv, reg, &values, val_count);
+}
+
+static void max96712_reset(struct max96712_priv *priv)
+{
+ max96712_update_bits(priv, 0x13, 0x40, 0x40);
+ msleep(20);
+}
+
+static void max96712_mipi_enable(struct max96712_priv *priv, bool enable)
+{
+ if (enable) {
+ max96712_update_bits(priv, 0x40b, 0x02, 0x02);
+ max96712_update_bits(priv, 0x8a0, 0x80, 0x80);
+ } else {
+ max96712_update_bits(priv, 0x8a0, 0x80, 0x00);
+ max96712_update_bits(priv, 0x40b, 0x02, 0x00);
+ }
+}
+
+static void max96712_mipi_configure(struct max96712_priv *priv)
+{
+ unsigned int i;
+ u8 phy5 = 0;
+
+ max96712_mipi_enable(priv, false);
+
+ /* Select 2x4 mode. */
+ max96712_write(priv, 0x8a0, 0x04);
+
+ /* Configure a 4-lane DPHY using PHY0 and PHY1. */
+ /* TODO: Add support for 2-lane and 1-lane configurations. */
+ /* TODO: Add support CPHY mode. */
+ max96712_write(priv, 0x94a, 0xc0);
+
+ /* Configure lane mapping for PHY0 and PHY1. */
+ /* TODO: Add support for lane swapping. */
+ max96712_write(priv, 0x8a3, 0xe4);
+
+ /* Configure lane polarity for PHY0 and PHY1. */
+ for (i = 0; i < priv->mipi.num_data_lanes + 1; i++)
+ if (priv->mipi.lane_polarities[i])
+ phy5 |= BIT(i == 0 ? 5 : i < 3 ? i - 1 : i);
+ max96712_write(priv, 0x8a5, phy5);
+
+ /* Set link frequency for PHY0 and PHY1. */
+ max96712_update_bits(priv, 0x415, 0x3f,
+ ((MAX96712_DPLL_FREQ / 100) & 0x1f) | BIT(5));
+ max96712_update_bits(priv, 0x418, 0x3f,
+ ((MAX96712_DPLL_FREQ / 100) & 0x1f) | BIT(5));
+
+ /* Enable PHY0 and PHY1 */
+ max96712_update_bits(priv, 0x8a2, 0xf0, 0x30);
+}
+
+static void max96712_pattern_enable(struct max96712_priv *priv, bool enable)
+{
+ const u32 h_active = 1920;
+ const u32 h_fp = 88;
+ const u32 h_sw = 44;
+ const u32 h_bp = 148;
+ const u32 h_tot = h_active + h_fp + h_sw + h_bp;
+
+ const u32 v_active = 1080;
+ const u32 v_fp = 4;
+ const u32 v_sw = 5;
+ const u32 v_bp = 36;
+ const u32 v_tot = v_active + v_fp + v_sw + v_bp;
+
+ if (!enable) {
+ max96712_write(priv, 0x1051, 0x00);
+ return;
+ }
+
+ /* PCLK 75MHz. */
+ max96712_write(priv, 0x0009, 0x01);
+
+ /* Configure Video Timing Generator for 1920x1080 @ 30 fps. */
+ max96712_write_bulk_value(priv, 0x1052, 0, 3);
+ max96712_write_bulk_value(priv, 0x1055, v_sw * h_tot, 3);
+ max96712_write_bulk_value(priv, 0x1058,
+ (v_active + v_fp + + v_bp) * h_tot, 3);
+ max96712_write_bulk_value(priv, 0x105b, 0, 3);
+ max96712_write_bulk_value(priv, 0x105e, h_sw, 2);
+ max96712_write_bulk_value(priv, 0x1060, h_active + h_fp + h_bp, 2);
+ max96712_write_bulk_value(priv, 0x1062, v_tot, 2);
+ max96712_write_bulk_value(priv, 0x1064,
+ h_tot * (v_sw + v_bp) + (h_sw + h_bp), 3);
+ max96712_write_bulk_value(priv, 0x1067, h_active, 2);
+ max96712_write_bulk_value(priv, 0x1069, h_fp + h_sw + h_bp, 2);
+ max96712_write_bulk_value(priv, 0x106b, v_active, 2);
+
+ /* Generate VS, HS and DE in free-running mode. */
+ max96712_write(priv, 0x1050, 0xfb);
+
+ /* Configure Video Pattern Generator. */
+ if (priv->pattern == MAX96712_PATTERN_CHECKERBOARD) {
+ /* Set checkerboard pattern size. */
+ max96712_write(priv, 0x1074, 0x3c);
+ max96712_write(priv, 0x1075, 0x3c);
+ max96712_write(priv, 0x1076, 0x3c);
+
+ /* Set checkerboard pattern colors. */
+ max96712_write_bulk_value(priv, 0x106e, 0xfecc00, 3);
+ max96712_write_bulk_value(priv, 0x1071, 0x006aa7, 3);
+
+ /* Generate checkerboard pattern. */
+ max96712_write(priv, 0x1051, 0x10);
+ } else {
+ /* Set gradient increment. */
+ max96712_write(priv, 0x106d, 0x10);
+
+ /* Generate gradient pattern. */
+ max96712_write(priv, 0x1051, 0x20);
+ }
+}
+
+static int max96712_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct max96712_priv *priv = v4l2_get_subdevdata(sd);
+
+ if (enable) {
+ max96712_pattern_enable(priv, true);
+ max96712_mipi_enable(priv, true);
+ } else {
+ max96712_mipi_enable(priv, false);
+ max96712_pattern_enable(priv, false);
+ }
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops max96712_video_ops = {
+ .s_stream = max96712_s_stream,
+};
+
+static int max96712_get_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *format)
+{
+ format->format.width = 1920;
+ format->format.height = 1080;
+ format->format.code = MEDIA_BUS_FMT_RGB888_1X24;
+ format->format.field = V4L2_FIELD_NONE;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_pad_ops max96712_pad_ops = {
+ .get_fmt = max96712_get_pad_format,
+ .set_fmt = max96712_get_pad_format,
+};
+
+static struct v4l2_subdev_ops max96712_subdev_ops = {
+ .video = &max96712_video_ops,
+ .pad = &max96712_pad_ops,
+};
+
+static const char * const max96712_test_pattern[] = {
+ "Checkerboard",
+ "Gradient",
+};
+
+static int max96712_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct max96712_priv *priv =
+ container_of(ctrl->handler, struct max96712_priv, ctrl_handler);
+
+ switch (ctrl->id) {
+ case V4L2_CID_TEST_PATTERN:
+ priv->pattern = ctrl->val ?
+ MAX96712_PATTERN_GRADIENT :
+ MAX96712_PATTERN_CHECKERBOARD;
+ break;
+ }
+ return 0;
+}
+
+static const struct v4l2_ctrl_ops max96712_ctrl_ops = {
+ .s_ctrl = max96712_s_ctrl,
+};
+
+static int max96712_v4l2_register(struct max96712_priv *priv)
+{
+ long pixel_rate;
+ int ret;
+
+ v4l2_i2c_subdev_init(&priv->sd, priv->client, &max96712_subdev_ops);
+ priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+
+ v4l2_ctrl_handler_init(&priv->ctrl_handler, 2);
+
+ /*
+ * TODO: Once V4L2_CID_LINK_FREQ is changed from a menu control to an
+ * INT64 control it should be used here instead of V4L2_CID_PIXEL_RATE.
+ */
+ pixel_rate = MAX96712_DPLL_FREQ / priv->mipi.num_data_lanes * 1000000;
+ v4l2_ctrl_new_std(&priv->ctrl_handler, NULL, V4L2_CID_PIXEL_RATE,
+ pixel_rate, pixel_rate, 1, pixel_rate);
+
+ v4l2_ctrl_new_std_menu_items(&priv->ctrl_handler, &max96712_ctrl_ops,
+ V4L2_CID_TEST_PATTERN,
+ ARRAY_SIZE(max96712_test_pattern) - 1,
+ 0, 0, max96712_test_pattern);
+
+ priv->sd.ctrl_handler = &priv->ctrl_handler;
+ ret = priv->ctrl_handler.error;
+ if (ret)
+ goto error;
+
+ priv->pads[0].flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_pads_init(&priv->sd.entity, 1, priv->pads);
+ if (ret)
+ goto error;
+
+ v4l2_set_subdevdata(&priv->sd, priv);
+
+ ret = v4l2_async_register_subdev(&priv->sd);
+ if (ret < 0) {
+ dev_err(&priv->client->dev, "Unable to register subdevice\n");
+ goto error;
+ }
+
+ return 0;
+error:
+ v4l2_ctrl_handler_free(&priv->ctrl_handler);
+
+ return ret;
+}
+
+static int max96712_parse_dt(struct max96712_priv *priv)
+{
+ struct fwnode_handle *ep;
+ struct v4l2_fwnode_endpoint v4l2_ep = {
+ .bus_type = V4L2_MBUS_CSI2_DPHY
+ };
+ int ret;
+
+ ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(&priv->client->dev), 4,
+ 0, 0);
+ if (!ep) {
+ dev_err(&priv->client->dev, "Not connected to subdevice\n");
+ return -EINVAL;
+ }
+
+ ret = v4l2_fwnode_endpoint_parse(ep, &v4l2_ep);
+ fwnode_handle_put(ep);
+ if (ret) {
+ dev_err(&priv->client->dev, "Could not parse v4l2 endpoint\n");
+ return -EINVAL;
+ }
+
+ if (v4l2_ep.bus.mipi_csi2.num_data_lanes != 4) {
+ dev_err(&priv->client->dev, "Only 4 data lanes supported\n");
+ return -EINVAL;
+ }
+
+ priv->mipi = v4l2_ep.bus.mipi_csi2;
+
+ return 0;
+}
+
+static const struct regmap_config max96712_i2c_regmap = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = 0x1f00,
+};
+
+static int max96712_probe(struct i2c_client *client)
+{
+ struct max96712_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->client = client;
+ i2c_set_clientdata(client, priv);
+
+ priv->regmap = devm_regmap_init_i2c(client, &max96712_i2c_regmap);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ priv->gpiod_pwdn = devm_gpiod_get_optional(&client->dev, "enable",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->gpiod_pwdn))
+ return PTR_ERR(priv->gpiod_pwdn);
+
+ gpiod_set_consumer_name(priv->gpiod_pwdn, "max96712-pwdn");
+ gpiod_set_value_cansleep(priv->gpiod_pwdn, 1);
+
+ if (priv->gpiod_pwdn)
+ usleep_range(4000, 5000);
+
+ if (max96712_read(priv, 0x4a) != MAX96712_ID)
+ return -ENODEV;
+
+ max96712_reset(priv);
+
+ ret = max96712_parse_dt(priv);
+ if (ret)
+ return ret;
+
+ max96712_mipi_configure(priv);
+
+ return max96712_v4l2_register(priv);
+}
+
+static int max96712_remove(struct i2c_client *client)
+{
+ struct max96712_priv *priv = i2c_get_clientdata(client);
+
+ v4l2_async_unregister_subdev(&priv->sd);
+
+ gpiod_set_value_cansleep(priv->gpiod_pwdn, 0);
+
+ return 0;
+}
+
+static const struct of_device_id max96712_of_table[] = {
+ { .compatible = "maxim,max96712" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, max96712_of_table);
+
+static struct i2c_driver max96712_i2c_driver = {
+ .driver = {
+ .name = "max96712",
+ .of_match_table = of_match_ptr(max96712_of_table),
+ },
+ .probe_new = max96712_probe,
+ .remove = max96712_remove,
+};
+
+module_i2c_driver(max96712_i2c_driver);
+
+MODULE_DESCRIPTION("Maxim MAX96712 Quad GMSL2 Deserializer Driver");
+MODULE_AUTHOR("Niklas Söderlund <niklas.soderlund@ragnatech.se>");
+MODULE_LICENSE("GPL");
Add basic support for Maxim MAX96712 quad GMSL2 deserializers. The driver is capable of powering on the device and configuring the MIPI CSI-2 bus in a DPHY 4-lane configuration as well as operating the internal VTG (Video Timing Generator) and VPG (Video Pattern Generator). Using these features the driver is able to act as a 1080p @ 30 fps V4L2 video source. Producing either a checkerboard or gradient pattern on the CSI-2 bus, selectable thru a V4L2 control. While the driver is useful as-is and have been used to prove the correct operation of the MAX96712 itself and "downstream" devices using the MAX96712 as a video source there are a lot of features missing. Most notably the ability to operate the GMSL bus. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- * Changes since v3 - Rebase on latest media-tree - Add 'depends on VIDEO_V4L2' * Changes since v2 - Update to new async API names. - Add documentation about why V4L2_CID_PIXEL_RATE is used. - Use msleep() instead of mdelay(). - Add set_fmt support. - Cleanup controls in error paths. --- MAINTAINERS | 6 + drivers/staging/media/Kconfig | 2 + drivers/staging/media/Makefile | 1 + drivers/staging/media/max96712/Kconfig | 14 + drivers/staging/media/max96712/Makefile | 2 + drivers/staging/media/max96712/max96712.c | 440 ++++++++++++++++++++++ 6 files changed, 465 insertions(+) create mode 100644 drivers/staging/media/max96712/Kconfig create mode 100644 drivers/staging/media/max96712/Makefile create mode 100644 drivers/staging/media/max96712/max96712.c