| Message ID | 20211216163439.139579-3-jacopo+renesas@jmondi.org (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 48a0c73f94d34ae5e78f85dc9a25e420a1dd207e |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | arm64: dts: renesas: Enable MAX9286 on Eagle and Condor | expand |
Hi Jacopo, Quoting Jacopo Mondi (2021-12-16 16:34:34) > Define a new vendor property in the maxim,max9286 binding schema. > > The new property allows to declare that the remote camera > power-over-coax is controlled by one of the MAX9286 gpio lines. > > As it is currently not possible to establish a regulator as consumer > of the MAX9286 gpio controller for this purpose, the property allows to > declare that the camera power is controlled by the MAX9286 directly. > > The property accepts a gpio-index (0 or 1) and one line polarity > flag as defined by dt-bindings/gpio/gpio.h. > > Reviewed-by: Rob Herring <robh@kernel.org> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > --- > .../bindings/media/i2c/maxim,max9286.yaml | 67 ++++++++++++++++++- > 1 file changed, 66 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > index ab4e7a620362..90315e217003 100644 > --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > @@ -70,6 +70,28 @@ properties: > a remote serializer whose high-threshold noise immunity is not enabled > is 100000 micro volts > > + maxim,gpio-poc: > + $ref: '/schemas/types.yaml#/definitions/uint32-array' > + minItems: 2 > + maxItems: 2 > + description: | > + Index of the MAX9286 gpio output line (0 or 1) that controls Power over > + Coax to the cameras and its associated polarity flag. > + > + The property accepts an array of two unsigned integers, the first being > + the gpio line index (0 or 1) and the second being the gpio line polarity > + flag (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW) as defined in > + <include/dt-bindings/gpio/gpio.h>. > + > + When the remote cameras power is controlled by one of the MAX9286 gpio > + lines, this property has to be used to specify which line among the two > + available ones controls the remote camera power enablement. > + > + When this property is used it is not possible to register a gpio > + controller as the gpio lines are controlled directly by the MAX9286 and > + not available for consumers, nor the 'poc-supply' property should be > + specified. > + > ports: > $ref: /schemas/graph.yaml#/properties/ports > > @@ -165,7 +187,16 @@ required: > - reg > - ports > - i2c-mux > - - gpio-controller > + > +# If 'maxim,gpio-poc' is present, then 'poc-supply' and 'gpio-controller' > +# are not allowed. > +if: > + required: > + - maxim,gpio-poc > +then: > + properties: > + poc-supply: false > + gpio-controller: false > > additionalProperties: false > > @@ -310,4 +341,38 @@ examples: > }; > }; > }; > + > + /* > + * Example of a deserializer that controls the camera Power over Coax Indentation seems broken... > + * through one of its gpio lines. > + */ > + gmsl-deserializer@6c { > + compatible = "maxim,max9286"; > + reg = <0x6c>; > + enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; > + > + /* > + * The remote camera power is controlled by MAX9286 GPIO line #0. > + * No 'poc-supply' nor 'gpio-controller' are specified. > + */ > + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; > + > + /* > + * Do not describe connections as they're the same as in the previous Here too, This seems like a simple way to describe this without hitting the circular dependency loops I was facing when I looked at this. I'm sorry it took me until v8 to find this out ;-) Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > + * example. > + */ > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@4 { > + reg = <4>; > + }; > + }; > + > + i2c-mux { > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > }; > -- > 2.33.1 >
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index ab4e7a620362..90315e217003 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -70,6 +70,28 @@ properties: a remote serializer whose high-threshold noise immunity is not enabled is 100000 micro volts + maxim,gpio-poc: + $ref: '/schemas/types.yaml#/definitions/uint32-array' + minItems: 2 + maxItems: 2 + description: | + Index of the MAX9286 gpio output line (0 or 1) that controls Power over + Coax to the cameras and its associated polarity flag. + + The property accepts an array of two unsigned integers, the first being + the gpio line index (0 or 1) and the second being the gpio line polarity + flag (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW) as defined in + <include/dt-bindings/gpio/gpio.h>. + + When the remote cameras power is controlled by one of the MAX9286 gpio + lines, this property has to be used to specify which line among the two + available ones controls the remote camera power enablement. + + When this property is used it is not possible to register a gpio + controller as the gpio lines are controlled directly by the MAX9286 and + not available for consumers, nor the 'poc-supply' property should be + specified. + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -165,7 +187,16 @@ required: - reg - ports - i2c-mux - - gpio-controller + +# If 'maxim,gpio-poc' is present, then 'poc-supply' and 'gpio-controller' +# are not allowed. +if: + required: + - maxim,gpio-poc +then: + properties: + poc-supply: false + gpio-controller: false additionalProperties: false @@ -310,4 +341,38 @@ examples: }; }; }; + + /* + * Example of a deserializer that controls the camera Power over Coax + * through one of its gpio lines. + */ + gmsl-deserializer@6c { + compatible = "maxim,max9286"; + reg = <0x6c>; + enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + + /* + * The remote camera power is controlled by MAX9286 GPIO line #0. + * No 'poc-supply' nor 'gpio-controller' are specified. + */ + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + + /* + * Do not describe connections as they're the same as in the previous + * example. + */ + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + }; + }; };