@@ -883,6 +883,14 @@ config RENESAS_RZAWDT
This driver adds watchdog support for the integrated watchdogs in the
Renesas RZ/A SoCs. These watchdogs can be used to reset a system.
+config RENESAS_RZN1WDT
+ tristate "Renesas RZ/N1 watchdog"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ This driver adds watchdog support for the integrated watchdogs in the
+ Renesas RZ/N1 SoCs. These watchdogs can be used to reset a system.
+
config RENESAS_RZG2LWDT
tristate "Renesas RZ/G2L WDT Watchdog"
depends on ARCH_RENESAS || COMPILE_TEST
@@ -84,6 +84,7 @@ obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o
obj-$(CONFIG_RENESAS_RZAWDT) += rza_wdt.o
+obj-$(CONFIG_RENESAS_RZN1WDT) += rzn1_wdt.o
obj-$(CONFIG_RENESAS_RZG2LWDT) += rzg2l_wdt.o
obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o
new file mode 100644
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/N1 Watchdog timer.
+ * This is a 12-bit timer driver from a (62.5/16384) MHz clock. It can't even
+ * cope with 2 seconds.
+ *
+ * Copyright 2018 Renesas Electronics Europe Ltd.
+ *
+ * Derived from Ralink RT288x watchdog timer.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define DEFAULT_TIMEOUT 60
+
+#define RZN1_WDT_RETRIGGER 0x0
+#define RZN1_WDT_RETRIGGER_RELOAD_VAL 0
+#define RZN1_WDT_RETRIGGER_RELOAD_VAL_MASK 0xfff
+#define RZN1_WDT_RETRIGGER_PRESCALE BIT(12)
+#define RZN1_WDT_RETRIGGER_ENABLE BIT(13)
+#define RZN1_WDT_RETRIGGER_WDSI (0x2 << 14)
+
+#define RZN1_WDT_PRESCALER 16384
+#define RZN1_WDT_MAX 4095
+
+struct rzn1_watchdog {
+ struct watchdog_device wdt;
+ void __iomem *base;
+ unsigned long clk_rate;
+};
+
+#define to_rzn1_watchdog(_ptr) \
+ container_of(_ptr, struct rzn1_watchdog, wdt)
+
+static inline uint32_t get_max_heart_beat(unsigned long clk_rate)
+{
+ return (RZN1_WDT_MAX * RZN1_WDT_PRESCALER) / (clk_rate / 1000);
+}
+
+static inline uint32_t compute_reload_value(uint32_t tick_ms,
+ unsigned long clk_rate)
+{
+ return (tick_ms * (clk_rate / 1000)) / RZN1_WDT_PRESCALER;
+}
+
+static int rzn1_wdt_ping(struct watchdog_device *w)
+{
+ struct rzn1_watchdog *wdt = to_rzn1_watchdog(w);
+
+ /* Any value retrigggers the watchdog */
+ writel(0, wdt->base + RZN1_WDT_RETRIGGER);
+
+ return 0;
+}
+
+static int rzn1_wdt_start(struct watchdog_device *w)
+{
+ struct rzn1_watchdog *wdt = to_rzn1_watchdog(w);
+ u32 val;
+
+ /*
+ * The hardware allows you to write to this reg only once.
+ * Since this includes the reload value, there is no way to change the
+ * timeout once started. Also note that the WDT clock is half the bus
+ * fabric clock rate, so if the bus fabric clock rate is changed after
+ * the WDT is started, the WDT interval will be wrong.
+ */
+ val = RZN1_WDT_RETRIGGER_WDSI;
+ val |= RZN1_WDT_RETRIGGER_ENABLE;
+ val |= RZN1_WDT_RETRIGGER_PRESCALE;
+ val |= compute_reload_value(w->max_hw_heartbeat_ms, wdt->clk_rate);
+ writel(val, wdt->base + RZN1_WDT_RETRIGGER);
+
+ return 0;
+}
+
+static irqreturn_t rzn1_wdt_irq(int irq, void *_wdt)
+{
+ struct rzn1_watchdog *wdt = (struct rzn1_watchdog *)_wdt;
+
+ dev_info(wdt->wdt.parent, "%s triggered\n", __func__);
+ return IRQ_HANDLED;
+}
+
+static struct watchdog_info rzn1_wdt_info = {
+ .identity = "RZ/N1 Watchdog",
+ .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+};
+
+static const struct watchdog_ops rzn1_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = rzn1_wdt_start,
+ .ping = rzn1_wdt_ping,
+};
+
+static const struct watchdog_device rzn1_wdt = {
+ .info = &rzn1_wdt_info,
+ .ops = &rzn1_wdt_ops,
+ .status = WATCHDOG_NOWAYOUT_INIT_STATUS,
+};
+
+static void rzn1_wdt_clk_disable_unprepare(void *data)
+{
+ clk_disable_unprepare(data);
+}
+
+static int rzn1_wdt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rzn1_watchdog *wdt;
+ struct device_node *np = dev->of_node;
+ struct clk *clk;
+ int ret;
+ int irq;
+
+ wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ wdt->wdt = rzn1_wdt;
+ wdt->wdt.parent = dev;
+
+ wdt->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(wdt->base))
+ return PTR_ERR(wdt->base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ret = devm_request_irq(dev, irq, rzn1_wdt_irq, 0,
+ np->name, wdt);
+ if (ret) {
+ dev_err(dev, "failed to request irq %d\n", irq);
+ return ret;
+ }
+
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to get the clock\n");
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ dev_err(dev, "failed to prepare/enable the clock\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, rzn1_wdt_clk_disable_unprepare,
+ clk);
+ if (ret) {
+ dev_err(dev, "failed to register clock unprepare callback\n");
+ return ret;
+ }
+
+ wdt->clk_rate = clk_get_rate(clk);
+ if (!wdt->clk_rate) {
+ dev_err(dev, "failed to get the clock rate\n");
+ return -EINVAL;
+ }
+
+ /*
+ * The period of the watchdog cannot be changed once set
+ * and is limited to a very short period.
+ * Configure it for a 1s period once and for all, and
+ * rely on the heart-beat provided by the watchdog core
+ * to make this usable by the user-space.
+ */
+ wdt->wdt.max_hw_heartbeat_ms = get_max_heart_beat(wdt->clk_rate);
+ if (wdt->wdt.max_hw_heartbeat_ms > 1000)
+ wdt->wdt.max_hw_heartbeat_ms = 1000;
+
+ wdt->wdt.timeout = DEFAULT_TIMEOUT;
+ ret = watchdog_init_timeout(&wdt->wdt, 0, dev);
+
+ return devm_watchdog_register_device(dev, &wdt->wdt);
+}
+
+
+static const struct of_device_id rzn1_wdt_match[] = {
+ { .compatible = "renesas,rzn1-wdt" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rzn1_wdt_match);
+
+static struct platform_driver rzn1_wdt_driver = {
+ .probe = rzn1_wdt_probe,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = rzn1_wdt_match,
+ },
+};
+
+module_platform_driver(rzn1_wdt_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/N1 hardware watchdog");
+MODULE_AUTHOR("Phil Edworthy <phil.edworthy@renesas.com>");
+MODULE_LICENSE("GPL v2");