@@ -4,14 +4,15 @@
$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-title: Renesas RZ/{G2L,V2L} Clock Pulse Generator / Module Standby Mode
+title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode
maintainers:
- Geert Uytterhoeven <geert+renesas@glider.be>
description: |
On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module
- Standby Mode share the same register block.
+ Standby Mode share the same register block. On RZ/V2M, the functionality is
+ similar, but does not have Clock Monitor Registers.
They provide the following functionalities:
- The CPG block generates various core clocks,
@@ -26,6 +27,7 @@ properties:
- renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2}
- renesas,r9a07g044-cpg # RZ/G2{L,LC}
- renesas,r9a07g054-cpg # RZ/V2L
+ - renesas,r9a09g011-cpg # RZ/V2M
reg:
maxItems: 1
@@ -43,9 +45,10 @@ properties:
description: |
- For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
and a core clock reference, as defined in
- <dt-bindings/clock/r9a07g*-cpg.h>
+ <dt-bindings/clock/r9a0*-cpg.h>
- For module clocks, the two clock specifier cells must be "CPG_MOD" and
- a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h>.
+ a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h> or
+ <dt-bindings/clock/r9a09g011-cpg.h>.
const: 2
'#power-domain-cells':
@@ -59,7 +62,7 @@ properties:
'#reset-cells':
description:
The single reset specifier cell must be the module number, as defined in
- the <dt-bindings/clock/r9a07g0*-cpg.h>.
+ the <dt-bindings/clock/r9a07g0*-cpg.h> or <dt-bindings/clock/r9a09g011-cpg.h>.
const: 1
required: